This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: Changing the default boot flash device in Redboot

From: David Vrabel <dvrabel at arcom dot com>
To: "'ecos-discuss at ecos dot sourceware dot org'" <ecos-discuss at ecos dot sourceware dot org>
Date: Wed, 01 Dec 2004 11:42:54 +0000
Subject: Re: [ECOS] Changing the default boot flash device in Redboot
References: <01C4D700.81031050.vanitha@agilis.st.com.sg>

Vanitha Ramaswami wrote:

Hello,

The hardware person says there is a jumper in our custom IXP425 board, that will allow us to boot from IXP425 Flash located on CS1.
Can you tell me, what changes should i do to redboot to boot from the flash in CS1.

What does this jumper actually do? If it, for example, swaps CS0 and CS1 (and I can't think off-hand of another way to switch the boot device) then you needn't do anything.

David Vrabel
--
David Vrabel, Design Engineer

Arcom, Clifton Road           Tel: +44 (0)1223 411200 ext. 3233
Cambridge CB1 7EA, UK         Web: http://www.arcom.com/

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]