This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Which gcc should we use for the latest CVS ECOS?


Andrew Lunn wrote:
On Wed, Apr 14, 2004 at 11:29:34PM -0400, Linux HA wrote:

I'm putting together a project that uses the ARM (EB40
like board). I'm using the latest full ecos from the
CVS. What is the 'best' stable release of the gnu tools
I should use?

Having said all that i would recommend the eCosCentric binaries. They
have been well tested with eCos. So these are probably you best bet.

Thanks, the eCosCentric binaries it is then.


--
Linux Home Automation                 Neil Cherry
http://home.comcast.net/~ncherry/     (Text only)
http://hcs.sourceforge.net/           (HCS II & HCS_C)

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]