This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Re: Improved big-endian support


On Sun, 2004-04-11 at 06:00, Andrew Lunn wrote:
> On Thu, Apr 08, 2004 at 11:31:35PM +0200, Bob Koninckx wrote:
> > Using the cs8900a with big endian machines is not as much a problem with
> > endianness as it is with byte swapping, which can be done by hardware or
> > software. The attached patch takes that into account. Tested on powerpc.
> > I suppose it should be alright on little endian machines as well, I do
> > not have the hardware to test it tough :-)
> 
> Does anybody have a little endian system with an cs9800a Ethernet
> device? Could somebody test this please on such a system.

Yes, I have a CerfCube with this setup.  I'll try to give it a look, but
it'll have to wait until later this week.
-- 
Gary Thomas <gary@mlbassoc.com>
MLB Associates


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]