This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Disabling RedBoot PCI on IXDP Platform


Herbold, Steve said:
>
> I am looking for the right way to disable PCI on our custom platform (code
> based on IXDP425 target), which does not have any PCI devices. I believe we
> have all the PCI signals tied off correctly for when it is not in use, and
> of course we are using the GPIO that were formally the PCI INTS, so they are
> not configured as interrupt inputs.
>
> Is there a single config switch that will disable most of the PCI code? I do
> not mind if it initializes the internal PCI hardware, and expect that it
> will not find any PCI devices, but there must be a good way to not mangle
> and butcher the code like I am doing.

Just leave CYGPKG_IO_PCI out of your target specification (in ecos.db)
Everything should work out fine (assuming the rest of the code plays
by the rules!)

>
> Steven J. Herbold
> Viadux, Inc.
> San Diego, CA 92121
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>




-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]