This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re[2]: redboot & EB55


Hello, Alan.

Yep. After successful writing redboot_ROM to flash,
I switched JP1 to USER and then reset EB55.

Regards,
     Mike

AB> Did you remember to switch the boot jumper (JP1, I think) to
AB> run from the alternative boot area?  If you wrote redboot_ROM to
AB> run from the USER flash area (0x01100000 when you have boot from
AB> Angel in the STD area) then you will need to move this jumper.

AB> I have run redboot on the EB55 perfectly well, following the
AB> documentation for the board at
AB> http://ecos.sourceware.org/ecos/docs-latest/ref/at91.html (I
AB> presume that this is the user guide you refer to).

AB> Hope this helps

AB> Alan Bowman

AB> -----Original Message-----
AB> From: Michael Jastrebtsoff [mailto:jam2000@pisem.net]
AB> Sent: 31 March 2004 05:54
AB> To: ecos-discuss@sources.redhat.com
AB> Subject: [ECOS] redboot & EB55


AB> Hello, All.

AB> I've got a issue with running RedBoot-ROM in EB55.
AB> I did all steps described in RedBoot Guide(for EB55):
AB>   1. Run Angel via GDB
AB>   2. Download redboot-RAM
AB>   3. get connected to redboot via terminal and download redboot-ROM
AB>      image. then I have wrote redboot-ROM firmware to the EB55.

AB> In case of connection to EB55 nothing goes on. Angel runs as usual.

AB> Old anyone successed in running redboot-ROM in EB55?


AB> -- 
AB> Regards,
AB>  Michael                          


AB> -- 
AB> Before posting, please read the FAQ:
AB> http://ecos.sourceware.org/fom/ecos
AB> and search the list archive:
AB> http://ecos.sourceware.org/ml/ecos-discuss






-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]