Re: [ECOS] EB 40A, Serial driver stops after 10 minutes

[Shiv Subramaniam <smaniam at yahoo dot com>]

Thanks Thomas,
   With the latest code from CVS the driver code is
stable for about 100 minutes. The system still comes
to halt after that.

Thanks,
Shiv

--- Thomas Koeller <thomas.koeller@baslerweb.com>
wrote:
> On Monday 05 January 2004 21:43, Shiv Subramaniam
> wrote:
> > Hello
> >    We have a variant of EB40A with only the clock
> > speed differing - 32.768 Mhz (instead of 66Mhz).
> >    After making the change for Clock speed
> > CYGNUM_HAL_ARM_AT91_CLOCK_SPEED to 3276800. We
> > compiled the code with original serial driver -
> The
> > result was that a lot of packets were getting
> dropped
> > (38400 baud).
> 
> Use ecos from CVS, if you can. The serial driver
> that
> comes with ecos releases 1.3 and 2.0 is known to
> loose
> data at higher speeds. The one in current CVS is
> largely reworked and does not suffer from this
> problem.
> 
> tk
> -- 
> Thomas Koeller, Software Development
> 
> Basler Vision Technologies
> An der Strusbek 60-62
> 22926 Ahrensburg
> Germany
> 
> Tel +49 (4102) 463-162
> Fax +49 (4102) 463-239
> 
> mailto:thomas dot koeller at baslerweb dot com
> http://www.baslerweb.com
> 


__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus

-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss