This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: EB 40A, Serial driver stops after 10 minutes
- From: Thomas Koeller <thomas dot koeller at baslerweb dot com>
- To: Shiv Subramaniam <smaniam at yahoo dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Mon, 5 Jan 2004 23:29:24 +0100
- Subject: Re: [ECOS] EB 40A, Serial driver stops after 10 minutes
- Organization: Basler AG
- References: <20040105204353.52886.qmail@web11504.mail.yahoo.com>
On Monday 05 January 2004 21:43, Shiv Subramaniam wrote:
> Hello
> We have a variant of EB40A with only the clock
> speed differing - 32.768 Mhz (instead of 66Mhz).
> After making the change for Clock speed
> CYGNUM_HAL_ARM_AT91_CLOCK_SPEED to 3276800. We
> compiled the code with original serial driver - The
> result was that a lot of packets were getting dropped
> (38400 baud).
Use ecos from CVS, if you can. The serial driver that
comes with ecos releases 1.3 and 2.0 is known to loose
data at higher speeds. The one in current CVS is
largely reworked and does not suffer from this problem.
tk
--
Thomas Koeller, Software Development
Basler Vision Technologies
An der Strusbek 60-62
22926 Ahrensburg
Germany
Tel +49 (4102) 463-162
Fax +49 (4102) 463-239
mailto:thomas dot koeller at baslerweb dot com
http://www.baslerweb.com
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss