This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: Configuration of printf output


Hello,
I have configured the parameters, see below, but my console is now"/dev/pts/4" but i don't see the hello world message. is the ecos configuration is only for tty console not for pts? I don't know is something is wrong, a connection or configuration.I would like to solve this before installling Redboot.
/dev/ser0-->Phisical port for the board
/dev/pts/0-->my console
/dev/ttyS0/-->COM port 

Thanks a lot

eibach@gdsys.de schrieb am 08.12.03 14:16:25:
> 
> Hello,
> 
> > Hello, is this configuration correct to send the printf on the screen?
> > Board:EB40A
> > Port:Serial A 
> > Default console device:/dev/ser0 ( in ISO C input/output function)
> > TTY-mode serial device driver-Console Device Name:/dev/pts/0
> > TTY model Chanel #0:dev/ser0
> > 
> > Something missing or wrong? Should i use minicom to see the output on the 
> > screen?
> 
> if you have Redboot installed, just use the ecos default configuration where everything is handled by ttydiag. This works fine if you are using gdb, but also standalone (e.g. with minicom or HyperTerminal connected to Redboot). Messing around with the serial configuration is not a good idea if you don't know exactly what you are doing.
> 
> Regards,
> Dirk
> 
> 
> To: ricardo_andrino@web.de
> Cc: ecos-discuss@sources.redhat.com
> 


______________________________________________________________________________
WEB.DE FreeMail wird 5 Jahre jung! Feiern Sie mit uns und
nutzen Sie die neuen Funktionen http://f.web.de/features/?mc=021130


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]