This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: application fail to execute instead.....
well, this discussion has confused me now. well i have not supported
CYGPKG_IO_FLASH and hence there is no output from the redboot source.
i have not modified the redboot source atall.
if i m correct should i modify my startup to ROMRAM..will this help me
out. till now i have made my startup as ROM and i import redboot_ROM.ecc.
satish
On Thu, 31 Jul 2003 13:58:09 +0530
"mohanlal jangir" <mohanlaljangir@hotmail.com> wrote:
> > well, i have burnt the RedBoot image in the flash ROM. and on power the
> > data is copied to the RAM and boots. so what changes should i do to
> > download my application and execute it.
> The line "RedBoot(tm) bootstrap and debug environment [ROM]" tells that it
> will get loaded as well as run from ROM. I will advice you use the trick
> explained by Michael Anburaj to find where is getting loaded and where is it
> getting run from. Also the line "RAM: 0x00000000-0x04000000,
> 0x00004948-0x04000000 available" tells about RAM only. If you have flash
> that should also be reported by RedBoot. Have you modified RedBoot source or
> you are rebuilding CVS code only?
>
> Regards
> Mohanlal
--
Satish Kumar <satish@bvt.sc.sanyo.co.jp>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss