This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: eCos on SE7751R board
- From: Paul van Gool <paul dot vangool at rinconnetworks dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Thu, 24 Jul 2003 16:25:57 -0700
- Subject: [ECOS] Re: eCos on SE7751R board
- References: <20030724192350.GA1178@rinconnetworks.com>
- Reply-to: paul dot vangool at rinconnetworks dot com
I forgot to mention there are also a few changes to
packages/hal/sh/se7751r/v2_0/include/platform.inc (when compared to
packages/hal/sh/se7751/v2_0/include/platform.inc):
CYGARC_REG_WCR2
CYGARC_REG_RTCOR
CYGARC_REG_MCR
Paul
On Thu, Jul 24, 2003 at 12:23:50PM -0700, Paul van Gool wrote:
> Hi,
>
> I'm not sure if this is the right list but attached to this mail is a
> compressed diff file that contains the changes we made to eCos 2.0 in
> order to get it to run on Hitachi's SE7751R development board.
>
> It's largely based on the SE7751 target of course. We added a new
> target called se7751r and copied the se7751 specific files for
> our new target. So there is a lot of duplicate code now ;-).
>
> The required changes when going from se7751 to se7751r are:
>
> - CYGHWR_HAL_SH_OOC_XTAL: has to be 20MHz instead of 27MHz.
>
> - CYGHWR_HAL_SH_OOC_PLL_1: 12 is also an allowed value
> bringing the CPU clock to 20MHz x 12 = 240 MHz.
>
> - CYGHWR_HAL_SH_OOC_CLOCK_MODE was set to 0 in our case.
>
> - A change was made to sh_se7751r_flash.c in
> packages/devs/flash/sh/se7751r/v2_0/src
>
> void
> plf_flash_init(void)
> {
> flash_data_t id[4];
>
> The size of the array was initially 2. Rod Campbell
> reported a similar problem a few months ago for
> other targets.
>
> - We made a change to the pcnet Ethernet driver to get it to work
> on 100BaseT. The changes are to:
>
> packages/devs/eth/amd/pcnet/v2_0/src/amd_pcnet.h
> packages/devs/eth/amd/pcnet/v2_0/src/if_pcnet.c
>
> Thanks.
>
> Paul
> --
> Paul van Gool Rincon Networks
> paul.vangool@rinconnetworks.com (805)-705-1442
--
Paul van Gool Rincon Networks
paul.vangool@rinconnetworks.com (805)-705-1442
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss