This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: RedBoot load problem
> On Thu, 2003-05-22 at 09:47, Martin Schoeberl wrote:
> > I'm using an old 486 notebook for first tests. I've installed the eCos
> > version from the book 'Embedded Software Dev. w. eCos'. Everything works
> > fine till the download of the first example via Hyperterminal. The
download
> > starts but after about 20KB it stops and host and traget run into
timeouts.
> >
> > Martin
>
> I found that I needed to apply this patch to get serial downloads to
> work in any useful way on my i386 target boards. I'm not sure why they
> were disabled (I think someone told me but I can't remember that long
> ago), but everything works fine for me with them turned on.
>
> Ian.
The problem has changed: I enabled 'Validate RAM addresses duringload' for
RedBoot and got the message:
*** Abort! Attempt to load S-record to address: 0x00108000, which is not in
RAM
version shows:
RAM: 0x00000000-0x000a0000, 0x0008ab30-0x000a0000 available
But the pc has 24MB of ram. How can I change this that RedBoot recognizes
ram above 0x100000.
Martin
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss