This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Re: questions about redboot
- From: "Matt Kober" <mattkober at web dot de>
- To: ecos-discuss at sources dot redhat dot com
- Date: Wed, 7 May 2003 16:34:33 +0200
- Subject: [ECOS] Re: Re: questions about redboot
- Organization: http://freemail.web.de/
i did build a rom version, put it into flash and started it with my
bootloader but i still can't debug the test prog.
i experienced the same behavior on my ARM E7T board when i
disabled the 'autoboot' option. i solved the
problem by reenabling 'autobooting' of the board.
my question now, is that kind of behavior normal?
thanks,
Matt
>
> Its better if you can give Redboot total control. You are never quite
> shore what the other bootloader has setup, and a RAM version of
> Redboot cannot totally reset the system. If you can, i would build a
> ROM version and put it into your flash. If you don't want to replace
> your current bootloader, link redboot to run at a different block in
> flash, and use your current bootloader to start it.
>
> One thing to check with your current setup. Are the load addresses
> different for redboot at the application? The application could be
> over-writing redboot.
>
> Andrew
______________________________________________________________________________
UNICEF bittet um Spenden für die Kinder im Irak! Hier online an
UNICEF spenden: https://spenden.web.de/unicef/special/?mc=021101
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss