This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: redboot on x86 PC
- From: NavEcos <ecos at navosha dot com>
- To: tengku at atsb-malaysia dot com dot my, ecos-discuss at sources dot redhat dot com
- Date: Fri, 04 Apr 2003 01:49:52 -0800
- Subject: Re: [ECOS] redboot on x86 PC
- References: <200304041627.AA95617280@atsb-malaysia.com.my>
You have a bad disk or a bad floppy disk drive. What you are seeing is a
read error.
Try using another floppy, and if that fails, another floppy drive. This is
not an uncommon problem.
-Rich
----- Original Message -----
From: "tengku" <tengku at atsb-malaysia dot com dot my>
To: <ecos-discuss at sources dot redhat dot com>
Sent: Friday, April 04, 2003 12:27 AM
Subject: [ECOS] redboot on x86 PC
> Dear all,
>
> I have problem with getting redboot to run with my x86 pc. I follow the
instructions in the redboot user guide. That is
>
> 1. formatted floppy disk using fdformat -n /dev/fd0H1440
> 2.$ dd conv=sync if=install/bin/redboot.bin of=/dev/fd0H1440
>
> I have downloaded the x86 redboot binaries from
http://sources.redhat.com/ecos/boards/redbootbins/x86pc/
> redboot.bin (80 Kbytes)
> redboot.elf (500 Kbytes)
>
> When I boot up the pc, it did found the boot record from floppy but after
that it gives:
> .....................AC2!
> and nothing happens after that. I tried to connect from host (Pentium 4
running RedHat Linux 8.0) to the x86 pc using i386-elf-insight but
unsuccessful
>
> Sincerely
>
> Tengku Ahmad Hafizi
>
> --
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss