This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Problem with building redboot on sh4(se7751)
- From: koji at akane dot waseda dot jp
- To: ecos-discuss at sources dot redhat dot com
- Date: Sat, 29 Mar 2003 16:29:56 +0900
- Subject: [ECOS] Problem with building redboot on sh4(se7751)
Hello
I wanna boot linux on the Hitachi SH4 Solution Engine
SE7751(HD6417751F167) with RedBoot.
At first I built redboot by ecosconfig with default platform RedBoot
configuration file.
The ecos version is 2.0b1.
$ ecosconfig new se7751 redboot
$ ecosconfig import ${ECOS_REPOSITORY}/hal/sh/se7751/VERSION/misc/
redboot_ROM.ecm
$ ecosconfig tree
$ make
and wrote redboot.eprom.srec into flash.
Ready > fl
$ cat redboot_ROM.eprom.srec > /dev/ttyS0
After that,
It booted from flash,I could'nt see boot message,
only see
" ++++++++........ "
The serial setting of target board is 38400 8N1.
I set Minicom by same parameters.
So I'd like to know if I need to modify configuration of building
redboot or special hardware setting.
Is there anyone who succeed to boot from flash on the se7751 board ?
please give me advice.
Koji Yamamoto
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss