This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Building stubs for ADDER - MPC850 board
"Gary D. Thomas" wrote:
> On Sat, 2003-02-08 at 02:50, Chandra Sekhar, G wrote:
> > Hi,
> >
> > We configured stubs for the ADDR - MPC850 board using the linux
> > graphical configuration tool eCos. When we build it we got a linker
> > problem. It says 'cyg_hal_plf_serial_init' is not defined. This, a
> > function, is defined in the file 'quicc_smc1.c' between #ifdef and
> > #endif of 'CYGPKG_HAL_POWERPC_MPC860'. Should it be
> > 'CYGPKG_HAL_POWERPC_MPC850' for the current board? or
> > some thing wrong with my configuration?
> >
> > I downloaded the eCos from anonymous CVS on 5th Feb. 2003.
>
> One more thing - the "stubs" configuration is not truly
> supported any more (except for a few special platforms).
> Use RedBoot instead.
>
> --
> .--------------------------------------------------------.
> | Mind: Embedded Linux and eCos Development |
> |--------------------------------------------------------|
> | Gary Thomas email: gary.thomas@mind.be |
> | Mind ( http://mind.be ) tel: +1 (970) 229-1963 |
> | gpg: http://www.chez-thomas.org/gary/gpg_key.asc |
> '--------------------------------------------------------'
Gary,
Redboot also has the same problem.
We used the configuration tool as you explained in your
previous reply,
templates-> Hardware = A&M Adder PPC850 board
and
Packages = Stubs/Redboot.
The problems occurred at the time of building, after
successful configuration.
We do not have the A&M boards, we are planing to get
them/similar boards.
regards,
chandra
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss