ecos-discuss archive
thread index for November, 2002
This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Messages are ordered newest-to-oldest in this index. The newest
threads will be at the top of this page, the oldest will be at the bottom.
Within a single thread, the first mail note is the START of the thread;
the notes following that are in the chronological order of when they
were received. So globally, newest messages are at the top, but within
a thread, the oldest (the start of the thread) is at the top.
If you think about it, it is confusing. Just go with the flow and
everything will be all right.
- Adding M-CORE into supported platforms ?,
Matti Aarnio
- eCos as Java platform on Psion 5mx,
olivier.duval
- ECOS for Atmel AT91,
Antonini Fabio - Technogym SPA
- eCos Presentation (Powerpoint foils? ;-),
Edelmann Thomas
- sh7750 sci port,
LEE See Heng
- Re: upd985xx USB slave patch,
Andrew Lunn
- Writing driver: Datasheet on Intel netcards (82550),
David Marqvar (DAM)
- stdin/stdout configuration,
Rick Richardson
- ASSERT: cyg_callout_reset() We didn't pick the smallest delta!,
Kevin Hilman
- RE: USB version is 1.10?!,
Jay Foster
- Re: Help in testing IPv6,
Gary Thomas
- RE: still some problem in redboot,
chia-yu (max) KUO
- Re: +redboot +harddisk,
Iztok Zupet
- Help in testing IPv6,
elvie hau
- still some problem in redboot,
chia-yu (max) KUO
- problem with xwindows in linux,
Mildred Frisco
- problem in build reboot,
chia-yu (max) KUO
- Congratulations and well done!,
Patrick Doyle
- Insight installation problem on cygwin,
Bahadir Balban
- RE: Build errors,
Agarwal, Lomesh
- about the consoles input,
xiaoyan wang
- Size of memory in ATAG_MEM (hal/arm/arch/.../redboot_linux_exec.c),
Xavier Debreuil
- PDA REdboot - GDB file download,
Amit Tuljapurkar
- System crash with GoAhead WeServer (ARM7 platform),
llandre
- RE: Port to c166 / c165 utah cpu,
Rosier, Roland
- SWAP macros,
Bob Koninckx
- Ecos interrupt handling,
A.K.V.SAI JAYRAM
- ARM gdb backtrace weirdness,
Jani Monoses
- interface document,
Simon_Tsai
- ARM port architecture questions,
Patrick Doyle
- USB version is 1.10?!,
Sergei Organov
- Problems with ARM thumb code,
Jepsen Hans Peter
- Port to c166 / c165 utah cpu,
Geoffrey Cant
- Re: New revision of select() hangs my code,
Nick Garnett
- RTP for ecos..,
A.K.V.SAI JAYRAM
- Build errors,
Agarwal, Lomesh
- New revision of select() hangs my code,
Dan Jakubiec
- eCos version 2.0 is a GPL-compatible Free Software license,
Peter Vandenabeele
- Re: OpenBSD stack and File IO package,
llandre
- RE: S3C45xx ethernet driver query,
Jay Foster
- RE: ecosconfig (beginner question)?,
Ian Gilmour
- OpenBSD stack and File IO package,
llandre
- ecosconfig (beginner question)?,
Ian Gilmour
- eCos & PowerPC 555, 565, 8xx, 82xx,
Robert Vojta
- AEB rev C cache fixed?,
Guillermo Rodriguez Garcia
- redboot on eb40a,
Konstantin Kletschke
- ARM E7T network capability,
Bahadir Balban
- calling function in different .S file problem.,
Qiang Huang
- Samsung S3C45xx Platform Porting,
Jay Foster
- Out of memory with the simulator,
Cusson, Pascal
- RE: GoAhead Web server,
Anthony Massa
- Re: Problem starting applications,
axl.schreiber
- About Debugging problem.,
Qiang Huang
- RE: Help about adding new sections for ARM platform,
Jay Foster
- linking problem.,
jameshq
- GoAhead Web server,
rhea santos
- Problem starting applications,
G Hasse
- conflicts problem,
narendra babu
- inconsistency after aborting fconfig,
Christoph Csebits
- RE: eCos/RedBoot on S3C44B0X,
Jesper Kjeldsen
- ARM's Exception vector location,
AL Chane
- Assert due to stack problem,
Daniel Lidsten
- memory layout,
AL Chane
- fopen,
Bob Koninckx
- How to build the HTML and PDF documentation in version 2 (under cygwin),
Jacques Ehrlich
- Question about the parameter passed to cyg_thread_create() fun?,
Qiang Huang
- ARM ROM regions and interrupt vectors,
Patrick Doyle
- Help about adding new sections for ARM platform,
llandre
- Re: checksum error,
Michael Lodman
- ANNOUNCE: lwIP update,
Jani Monoses
- Re: FAT/VFAT support on ECOS,
Igor KOPRIVA
- What happens during optimization,
Daniel Lidsten
- help needed for testing ROM image & Q about gdb,
Yin Bao
- FAT/VFAT support on ECOS,
Paul Davis
- Re: objcopy error in redboot makefile,
H Girard
- pthread-kill question,
Erik Aagaard Knudsen
- New elf section problem,
Vinayak P Risbud
- Re: New section,
Vinayak P Risbud
- New section,
Vinayak P Risbud
- powerpc hal structure,
Thomas Koeller
- Dropping off for a while,
Schumacher, Gordon
- Reinitializing eth0 using BOOTP,
Ajay Dudani
- structure XScale HAL ?,
david
- configtool.exe issues,
Will Tucker
- Mbx TCP/IPStack,
Ingo Sihler
- ZLIB functions,
Chris Garry
- memory layout modification,
AL Chane
- MP3 support,
kcai
- i82559 driver: i82557 support?,
Kevin Hilman
- license obligation,
max
- danamic loading,
max
- RE: eCos ARM7TDMI porting,
Patrick Doyle
- Can I config two different set of development tools in the same computer?,
Qiang Huang
- RE: Why I can't set the breakpoint in the C source code in built ecos library?,
Qiang Huang
- Why I can't set the breakpoint in the C source code in built ecos library?,
Qiang Huang
- convert gdb_module.img to .bin using objcopy,
AL Chane
- Re: network test build error,
Mildred Frisco
- RE: Which gcc version recommended for ARM thumb??,
Koeller, T.
- Which gcc version recommended for ARM thumb??,
Jepsen Hans Peter
- target.ld does not contain our package's symbols,
Shivkumar J
- Porting TCP/IP Stack??,
Kiran C
- ARM Simulator,
Patrick Doyle
- asking for help,
narendra babu
- documentation,
Bob Koninckx
- Memory Layout for new platform porting,
AL Chane
- can u help me pls [Unsubscription ],
Simun
- Samsung 44B0 porting,
AL Chane
- PowerPC Can drivers,
Rycerz Roman-G11565
- sorry, mistake for the previous question.,
Qiang Huang
- File format question regarding to Debugging.,
Qiang Huang
- downloading into target: serial card/i82557,
Praveen Kumar
- network test build error,
Mildred Frisco
- Re: ecosconfig - disabling printf?,
harri.siirtola
- ecosconfig - disabling printf?,
Scott Dattalo
- Connecting to Jeeni via ethernet.,
Ormund Williams
- PC at the time of interrupt in ISR,
Niclas Eriksson
- using ping in redboot,
00917764d
- redboot network and bootp support,
Mildred Frisco
- TCP/IP stack testing problem for ecos,
rhea santos
- network build and testing of network test programs,
Mildred Frisco
- ping problem in redboot,
00917764d
- Question about the virtual vector? Thanks,
Qiang Huang
- Procedural and General Information on new network (freebsd) package in cvs.,
Warren Postma
- RE: New IMMR address not recognized,
Cusson, Pascal
- i386 Ram Access,
Erdem Guven
- RE: Thread operation,
Daniel Lidsten
- se77x9 memory map question,
Cho, JinJe (FXKIS.KOR)
- RE: Build standalone application in E7T,
Ravi Kumar B S
- IQ80321 Board and RedBoot,
Bilal Shahid Cheema
- RedBoot for IQ80321 Board,
Bilal Cheema
- Re: eCos booting problem,
Iztok Zupet (by way of Iztok Zupet <iztok.zupet@vsr.si>)
- New IMMR address not recognized,
Cusson, Pascal
- RE: arm-elf-gdb does not work,
Schumacher, Gordon
- Thread operation,
Daniel Lidsten
- about the wireless lan on iPAQ,
00917764d
- [Fwd: redboot RAM for EB40 v2.0],
Jonathan Larmour
- Trace functions,
Raphael COTTY
- Re: Can eCos run RAM-startup on MIPS MALTA board?,
Iztok Zupet
- downloading applications and ecos kernel,
Mildred Frisco
- about wireless lan on iPAQ,
00917764d
- RE: How di I fix this problem in ecos?,
MAX Kuo
- how to connect the GDB and redboot via serial port on PC envirenment,
chi xiaobo
- simple Q about redboot,
Yin Bao
- eCos support for Oki ML674000,
Daniel Leu
- eCos booting problem,
Amit Chaudhary
- Testing eCos,
rhea santos
- arm-elf-gdb does not work,
Mildred Frisco
- someone to help,
sainfeld
- How di I fix this problem in ecos?,
MAX Kuo
- Build ConfigTool for Linux,
sainfeld
- Making an Ecos Kernel suitable for Hello World (minimalist) situations.,
Warren Postma
- problem getting gdb talking to Cirrus Logic 7312 dev board,
Yin Bao
- RE: How to disable GDB STUBS?,
Agarwal, Lomesh
- How to disable GDB STUBS?,
Agarwal, Lomesh
- RE: GDB "invalid remote reply"...,
Schumacher, Gordon
- stress_threads: I'm getting "Bad byte in chunk" output. Do I have memory corruption?,
Warren Postma
- RE: CPU usage by threads,
Daniel Lidsten
- RE: Insight/GDB 5.2 Extremely slow on nano target (ethernet debugging),
Cusson, Pascal
- Re: Problem related to eCos,
Gary Thomas
- Question about the Measurements Item?,
Qiang Huang
- question about jffs2+redboot+kernel!!,
Roy Chung
- Problems with cache.c for ARM7TDMI,
Andrew Lai Tien Long
- about socket low power wlan card,
00917764d
- Re: where trace and assert run?,
Jonathan Larmour
- Re: RealTek 8139 Redboot i386,
Jonathan Larmour
- Re: Protecting RedBoot in the field,
Jonathan Larmour
- Re: simultaneous socket write/close causes panic?,
Jonathan Larmour
- Re: CVS docs PDF patch,
Iztok Zupet
- Re: some problems with thread.hxx,
Jonathan Larmour
- Re: question about Kernel 2.4.18+MTD+Jffs2+redboot,
Jonathan Larmour
- Re: memory layout,
Jonathan Larmour
- Re: Serial ports on SA-1100,
Jonathan Larmour
- Re: debugging using redboot on iPAQ,
Jonathan Larmour
- Re: redboot and MIPS malta board,
Jonathan Larmour
- Re: configtool question,
Jonathan Larmour
- GDB "invalid remote reply"...,
Schumacher, Gordon
- RE: having ecos working with third-party development environment?,
Schumacher, Gordon
- Insight/GDB 5.2 Extremely slow on nano target (ethernet debugging),
Warren Postma
- InfoLetter,
Valeria D.
- having ecos working with third-party development environment?,
Yin Bao
- ARM7 port,
Patrick Doyle
- ecos redboot bochs,
Vijai Krishnamurthy
- Recommended gcc version - ecos / XScale,
david
- RE: Is it possible to do polling for the Ethernet driverusing a stack ?,
David Webster
- CVS maintainers,
Iztok Zupet
- multi-threading in eCos and Linux,
00917764d
- problem in thmas and tim's patch,
MAX Kuo
- redboot as debugger / bootstrap for RTLINUX ?,
Bob Koninckx
- ecos w/ arm-thumb,
John Paul King
- how can I create real time clock interrupt?,
=?GB2312?Q?=C0=EE=EA=CD?=
- question about read-only root file ssystem!!,
Roy Chung
- Quick question about cyg_cond_signal,
Srdjan Sobajic
- Re: Ecos v 2,
Peter Vandenabeele
- using asserts enabled with linux synthetic target,
Tracy Jones
- building kernel for arm-elf nano target, went back to gcc 2.95, now I get assembler errors.,
Warren Postma
- The Nano Saga - Part the Third - libsupc++,
Warren Postma
- Wake select() with a signal,
Roland Caßebohm
- Linux with Redboot on EP7312,
Adam Bezanson
- Re: Port eCos to iPAQ H3850,
Gary Thomas
- Re: stubs and redboot building,
Gary Thomas
- redboot always disabled entry,
Andrew Lunn
- server_test vmware tribulation,
Vijai Krishnamurthy
- Fw: Re: Re: How to generate the binay file,
Lin Ming
- Re: Okay,I got everything but configtool.exe built (GUI).,
Andrew Lunn
- Re: Accessing config parameters in define_proc code,
Andrew Lunn
Mail converted by MHonArc 2.5.13