This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: downloading of application in assabet
- From: "Mildred Frisco" <mildredf at asti dot dost dot gov dot ph>
- To: <iztok dot zupet at vsr dot si>, "'Gary Thomas'" <gthomas at ecoscentric dot com>
- Cc: "'eCos Discussion'" <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 24 Oct 2002 17:27:33 +0800
- Subject: RE: [ECOS] downloading of application in assabet
I found out there's something wrong with the gdb tool. How do I check if
the serial connection is working ?
-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com
[mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Iztok Zupet
Sent: Thursday, October 24, 2002 2:44 PM
To: Mildred Frisco; 'Gary Thomas'
Cc: 'eCos Discussion'
Subject: Re: [ECOS] downloading of application in assabet
On Thursday 24 October 2002 08:33, Mildred Frisco wrote:
> I tried to download test application using arm-elf-gdb
>
> # arm-elf-gdb thread_gdb
>
> then the graphical gdb will appear showing the source code of the test
> program. i click File->Target Settings and set it to Remote/Serial,
38400,
> /dev/ttyS0. then Run->Connect to Target. after sometime a message
appears
> 'Successfully Connected'. i then try to download by Run->Download but
If the Successfully Connected appears within a second or two, than the
communication is ok. But if there's a minute or two timeout before it
appears, there must be something wrong with the communication, I'm sure.
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss