[ECOS] Build failed again!

["sanjeev" <sanjeev dot rath at iap-online dot net>]

Jonathon you are quite right in pointing out that that the small "p" affair
was because of my manual typing the error line rather than the corrupt
source. As advised i tried using configuration tool v2.11 and build the
source. Now I can ataleast proceed upto the build phase without any problem.
But when i try build, the following error line is coming up.

"10/01/02 09:53:21: Execution of command 'make -j1 --directory
"/ecos-d/sample2_build"' failed (error 2: the system cannot find the file
specified.)"
"10/01/02 09:53:21: Execution of 'make -j1 --directory
"/ecos-d/sample2_build"' failed."

As it states, make not being able to locate the build file .I feel its
trivial of an issue but i am not being able to see through it. Looking
forward to your responses.

Thanks in advance,
Sanjeev
Associate consultant,IAP,New Delhi
-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com
[mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Jonathan
Larmour
Sent: Tuesday, October 01, 2002 12:02 AM
To: sanjeev
Cc: eCos Discussion
Subject: Re: [ECOS] Re: please help in build of ecos!


Gary Thomas wrote:
> On Thu, 2002-09-26 at 22:21, sanjeev wrote:
>
>>Hello,
>>Thanks for all the help from Andrew and Jifl so far.
>>I am now trying to install and build ecos 1.3.1 on win2K as suggested.
>>I am building the tool for AEB-2 taking the minimal default package
option.
>>As soon as i select this option, and click "OK", the errror message pops
up
>>as follows.
>>
>>"Error loading hardware template 'e7T'":
>>package CYGpKG_IO_SERIAL_ARM_E7T,1 ERROR occured while reading the CDL
data.
>
>           ^^^^^^^^^^^^^^^^^^^^^^^^
>
> It looks like you have corrupted sources!  This should say CYGPKG_IO...
> The package name with a lower case "p" will not match the one that is
> present (upper case "P").

I reckon Sanjeev was probably copying it by hand.

> Also, please don't use 1.3.1  Use the CVS (or snapshots) instead.

That's the important issue.

Also, Sanjeev, make sure you are using either configtool v2, or the
configtool v1 binary downloadable from
<http://sources.redhat.com/ecos/anoncvs.html>. The error you describe
above could easily happen from using the configtool that comes supplied
with v1.3.1.

Jifl
--
--[ "You can complain because roses have thorns, or you ]--
--[  can rejoice because thorns have roses." -Lincoln   ]-- Opinions==mine


--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss