This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Problem using SERIAL_GENERIC_16X5X serial driver
- From: brenner joel <joel dot brenner at tchip dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Tue, 09 Jul 2002 15:36:15 +0200
- Subject: [ECOS] Problem using SERIAL_GENERIC_16X5X serial driver
Hi all!
I'm trying to use the SERIAL_GENERIC_16X5X serial driver for my custom
target. (I've used arm/pid serial driver as example)
When I compile the kernel I've the following error message:
/home/brenner/ecos/packages/devs/serial/generic/16x5x/current/src/ser_16x5x.c
/home/brenner/ecos/packages/devs/serial/generic/16x5x/current/src/ser_16x5x.c:213:44:
cyg/io/arm_rms_extern_ser.inl: No such file or directory
and this is right because no inline file is placed cyg/io/.
In the cdl file of rm_rms_extern_ser following paths are defined
...
define_proc {
puts $::cdl_system_header "/***** serial driver proc output
start *****/"
puts $::cdl_system_header "#define
CYGDAT_IO_SERIAL_GENERIC_16X5X_INL <cyg/io/arm_rms_extern_ser.inl>"
puts $::cdl_system_header "#define
CYGDAT_IO_SERIAL_GENERIC_16X5X_CFG <pkgconf/io_extserial_arm_rms.h>"
puts $::cdl_system_header "/***** serial driver proc output
end *****/"
}
...
witch are used to configure the SERIAL_GENERIC_16X5X driver
My question is: where I've to define a command witch copies
devs/serial/arm/rms/current/include/arm_rms_extern_ser.inl to
<cyg/io/arm_rms_extern_ser.inl> and what is this command?
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss