This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
IMM base for MPC8xx based Targets
- From: Wolfgang Heppner <hep at iis dot fhg dot de>
- To: ecos-discuss at sources dot redhat dot com
- Date: Thu, 27 Jun 2002 17:40:25 +0200
- Subject: [ECOS] IMM base for MPC8xx based Targets
- Organization: FhG-IIS-A
Hi,
i am porting my application from eCos 1.3.1 to the current CVS-Version.
I am using a MPC8xx based board and derived my platform hal from the
mbx-hal.
I noticed that some init-functions failed, because the definition of the
IMM baseaddress (CYGARC_REG_IMM_BASE in
packages/hal/powerpc/mpc8xx/current/include/var_regs.h) has changed (my
platform still uses 0xff000000 as IMM base)! As a workaround i had to
change the variant hal.
The location of the internal memorymap is platform dependend (it can be
configured in hardware during power-up).
Therefore there should be a way to set the IMM baseaddress in the
platform hal (not in the variant hal) or even better - it should be
configurable. Or did i miss anything?
Thanks
Wolfgang
--
Wolfgang Heppner
High Speed Kamerasysteme - Abt. Bildsensorik (ESY-B)
High Speed Camera Systems - Dept. Electronic Imaging (ESY-B)
Fraunhofer
Institut Integrierte Schaltungen
Angewandte Elektronik
Am Wolfsmantel 33
91058 Erlangen
(Germany)
Tel: +49 (0) 9131 776 528
Fax: +49 (0) 9131 776 598
email: hep@iis.fhg.de
web: http://www.iis.fhg.de
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss