This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: StrataFlash memory support
- From: "Seung-Jin, Han" <drrector at dreamx dot net>
- To: "eCos Mailing List" <ecos-discuss at sources dot redhat dot com>,"K. Young Park" <pkyoung at palmpalm dot co dot kr>
- Date: Fri, 26 Apr 2002 20:24:04 +0900
- Subject: RE: [ECOS] StrataFlash memory support
When I just select the template as follows,
"build -> template ->hardware: Intel StrongARM SA-1110 board, "
All the packages that must have been included in the template are absent.
However, when I IMPORT directly the ecm file of 'hal/arm/sa11x0/assabet/current/misc/redboot_ROM.ecm' as K. Young Park has pointed out, All the packages that have to be included is displayed and active.
After I build the template I found the same redboot command and functions as the one that sources.redhat.com released.
Why this difference has to happen?
-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com [mailto:ecos-discuss-
owner@sources.redhat.com]On Behalf Of K. Young Park
Sent: Friday, April 26, 2002 12:37 PM
To: Seung-Jin, Han; ecos-discuss@sources.redhat.com
Subject: RE: [ECOS] StrataFlash memory support
Include the support for the general flash I/O.
And default configuration you can use for the assabet board is hal/arm/sa11x0/assabet/current/misc/redboot_ROM.ecm.
Just import this file using the ecosconfig.exe .
-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com [mailto:ecos-discuss-
owner@sources.redhat.com]On Behalf Of Seung-Jin, Han
Sent: Thursday, April 25, 2002 4:55 PM
To: eCos Mailing List
Subject: [ECOS] StrataFlash memory support
When I build the ecos configuration for the assabet board the template"Intel StrongARM SA-1110 Evaluation Board" does not support the Strata Flash memory support.
I am using configuration tool version 2.08. The option "Intel StrataFLASH memory suport" & "Intel SA1110(Assabet) FLASH memory support" does not come to be active.
If so, is it impossible to use strata flash memory device driver. I guess that I can use it.
How can I do that?
If the template that I use does not the support the strata flash memory What source file do I have to modify?
What configuration file makes the option active or not? Where is it?
Thanks in advance!!!
===========================================================
ÇѽÂÁø(Seung-Jin, Han)
(drrector@milletech.com; MSN:drrector@orgio.net)
MilleTech Co., Ltd. (www.milletech.com)
7th Floor, ASEM Tower, World Trade Center, 159-1
Samsung-Dong, Kangnam-Gu, Seoul, Korea 135-798
Tel: +82-2-3430-6878 Fax: +82-2-3452-9379
===========================================================