This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
redboot for ixp1200?
- From: gopi at india dot tejasnetworks dot com
- To: Jonathan Larmour <jlarmour at redhat dot com>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Thu, 21 Mar 2002 10:22:59 +0000 (GMT)
- Subject: [ECOS] redboot for ixp1200?
Is redboot supported for IXP1200 Eval board. I got messages on
linux-arm@lists.arm.linux.org.uk
that ixp1200 is currently not supported by redboot and hence we need
to use cygmon.
Any idea if any body is working on getting ixp1200 eval board support
in redboot?
thanx
gopi
On Wed, 20 Mar 2002, Jonathan Larmour wrote:
> yoocomet wrote:
> >
> > I use cygmon 2.05 on my board
> > My board is similar to ixp1200 evaluation board.
> > I'd like to use linux on my board.
> >
> > Bilding Cygmon 2.05 image is big-endian and I have to byte swap for Cygmon image.
> > As a result cygom booting on my board.
> > when cygmon was big-endian that can't boot.
> >
> > linux kernel downloaded by tftp in ixp1200 eval board.
> > linux kernel was copy to SDRAM area from flash memory in my board.
> >
> > linux kernel was works big-endian in ixp1200 eval board.
> > but linux kernel didn't works big-endian in my board,
> > There is only works little-endian mode.
> >
> > I guess cygmon was wrong but I don't know.
> > I've checked ixp1200 register related endian.
> > It was set big-endian mode.
> >
> > Could you help me?
>
> Not really, sorry. Cygmon is no longer supported. RedBoot is the future. Of
> course it would be useful for you to inspect memory and see how Cygmon laid
> out the loaded kernel, checking if too few/many byte swaps have occurred.
>
> Jifl
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss