This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Serial driver for gcc
- To: ecos-discuss at sourceware dot cygnus dot com
- Subject: [ECOS] Serial driver for gcc
- From: Richard Wicks <rich at accetnetwork dot com>
- Date: Mon, 29 Oct 2001 12:25:24 -0700
- Organization: Accet Networks
- Reply-To: rich at accetnetwork dot com
I have a board with a PCI interface on it and I would like to replace the
serial driver that gcc is using with a pseudo-serial driver that uses the PCI
interface instead. Writing a device driver for Linux that looks like a
serial driver will not be a problem but where I'm running into difficulty is
finding where eCos implements it's serial driver so I can replace it.
I've been reading the documentation, but my board does not (seem to) include
ARCH/PLATFORM/v1_3_x/src/plf_stub.c. I am using an IQ80310 board.
What file contains the serial driver for the IQ80310 board? I assume that
both the redboot binary as well as the application code will have to have
their serial drivers replaced with the pseudo-driver. Is this true?
Thanks,
-Rich