RE: [ECOS] loading programs to RAM via RedBoot (using minicom on Linux)

[Warren Jasper <Warren dot Jasper at bops dot com>]

I figured it out.  The person who installed my Linux box
forgot to include the lrzsz-XX.i386.rpm!!!  Sorry about the
post, it was pilot error on my part.  Funny that minicom would
not complain that /usr/bin/sx did not exist.

Things are working great now.

-----Original Message-----
From: Jonathan Larmour [mailto:jlarmour@redhat.com]
Sent: Friday, September 21, 2001 3:43 PM
To: Warren Jasper
Cc: 'ecos-discuss@sources.redhat.com'
Subject: Re: [ECOS] loading programs to RAM via RedBoot (using minicom
on Linux)


Warren Jasper wrote:
> 
> I'm not having much luck using the load command
> with minicom via a serial connection to RedBoot.
> Perhaps someone can tell me what I am doing wrong or
> did not configure correctly.
> 
> 1. RedBoot> load -r -v -b 0x100000 -m xmodem
> CTRL-A Z -> S -> xmodem -> select file to upload
> I then see:
> 
> CCCCC..........Can't load '<null>':Timed out
> RedBoot>

If you don't try to do the upload, what speed do the "C"s come out? If it's
faster than one every two seconds, you need to improve your delay_us.
Otherwise, you might have to just type faster :-).
 
You could up the values in the #defines at the top of xyzModem.c. Really
those should be CDL options anyway.

Jifl
-- 
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine