This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: RedBoot FLASH config suggestion
- To: "Trenton D. Adams" <tadams at theone dot dnsalias dot com>
- Subject: RE: [ECOS] RedBoot FLASH config suggestion
- From: Gary Thomas <gthomas at redhat dot com>
- Date: 21 Sep 2001 07:20:28 +0900
- Cc: 'Jonathan Larmour' <jlarmour at redhat dot com>,'eCos Discussion' <ecos-discuss at sourceware dot cygnus dot com>
- References: <001b01c14207$086e86b0$090110ac@TRENT>
The most probable case is that I've fixed bugs in the 'fconfig' layout
recently and that your ROM vs RAM versions are of different vintages.
On Fri, 2001-09-21 at 04:04, Trenton D. Adams wrote:
> Nope, not possible. I have the ECOS_REPOSITORY variable set.
>
> -----Original Message-----
> From: jlarmour@cambridge.redhat.com
> [mailto:jlarmour@cambridge.redhat.com] On Behalf Of Jonathan Larmour
> Sent: Thursday, September 20, 2001 1:02 PM
> To: Trenton D. Adams
> Cc: 'eCos Discussion'
> Subject: Re: [ECOS] RedBoot FLASH config suggestion
>
>
> "Trenton D. Adams" wrote:
> >
> > I get the error below every time I switch from a RAM version to a ROM
> > version or vice versa. This only happens when "fconfig" has been run
> on
> > the other version (RAM|ROM). So, I assume that the checksum is based
> on
> > whether a RAM/ROM version is running? If so, what's the purpose of
> > this? How do you get it so that the RAM version will use the same
> > config as the ROM version?
> >
> > FLASH configuration checksum error or invalid key
>
> Different source base used to build the two?
>
> Jifl