This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Debug output
- To: "Trenton D. Adams" <tadams at extremeeng dot com>
- Subject: Re: [ECOS] Debug output
- From: Jonathan Larmour <jlarmour at redhat dot com>
- Date: Wed, 13 Jun 2001 20:10:15 +0100
- Cc: 'eCos' <ecos-discuss at sources dot redhat dot com>
- Organization: Red Hat UK Ltd.
- References: <001301c0f439$98cfc3c0$090110ac@BURN>
"Trenton D. Adams" wrote:
>
> > > > "Trenton D. Adams" wrote:
> > > > >
> > > > > So from what I gather, this is not output to the serial
> > > > port when my
> > > > > program outputs to the serial port, but when the system
> > starts up
> > > > > right? So, diag_printf () prints to the first serial port
> > > > by default
> > > > > then right?
> > > >
> > > > The default serial port for diag output is defined in your
> > > > configuration.
> > >
> > > Does that mean it's hardcoded in or available as an option in
> > > my config tool? If it's an option, where do I find it?
> > >
> > Never mind, I found it. It's called "Debug serial port".
> >
>
> I mean "Diagnostic serial port".
Remember this is only the default. It _can_ be changed at runtime. But
please don't ask me how unless you really need to know :-).
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine
Come to the Red Hat TechWorld open source conference in Brussels!
Keynotes, techie talks and exhibitions http://www.redhat-techworld.com/