This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]

Re: problem with termios: tcgetattr

To: Jonathan Larmour <jlarmour at redhat dot com>
Subject: Re: [ECOS] problem with termios: tcgetattr
From: Franck MAMALET FT-R&D DIH/OCF <franck dot mamalet at rd dot francetelecom dot fr>
Date: Wed, 13 Jun 2001 11:48:08 +0200
CC: ecos-discuss at sourceware dot cygnus dot com
Organization: FT-R&D Grenoble
References: <3B24DE96.E2AF11BB@rd.francetelecom.fr> <3B252494.F2FE5029@redhat.com>

Jonathan Larmour wrote:

It should have gone to termios_get_config in
io/serial/curent/src/common/termiostty.c
Did you enable CYGPKG_IO_SERIAL_TERMIOS_TERMIOS2 in your configuration?

I did now, and it still doesn't work when I try to open /dev/ser2, but it does with /dev/termios2. What are the differences between them?

Besides, I read your discussion with Trenton D. Adams about " Simple serial program" : Could you explain me why open(/dev/ser1,..) doesn't fail when this UART is used for GDB connection?

Thanks,
Franck.

-- 
& france telecom 
Mamalet Franck
FTR&D DIH/OCF
Tél  : 04 76 76 45 71   Fax : 04 76 90 34 43
franck.mamalet@rd.francetelecom.fr

Follow-Ups:
- Re: problem with termios: tcgetattr
  - From: Jonathan Larmour

References:
- problem with termios: tcgetattr
  - From: Franck MAMALET FT-R&D DIH/OCF
- Re: problem with termios: tcgetattr
  - From: Jonathan Larmour

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]