This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

Assabet flash problem



I have an Assabet for which the precompiled Redboot binary from current CVS
seems to work just fine.  It is just a bit outdated compared to the current
state of the source, but still it works.

However if I recompile redboot myself, the resulting binary just doesn't
want to recognize the flash on the board anymore:

|Can't identify FLASH, sorry, man b0, dev d0, id [QRY.] stat 0
|00018780: B0D0 0002 0000 0000  0000 0000 0000 0000   |................|
|00018790: 5152 5901 0031 0000  0000 0030 5530 5503   |QRY..1.....0U0U.|
|000187A0: 060A 0F04 0404 0415  0200 0500 011F 0000   |................|
|000187B0: 0150 5249                                  |.PRI            |
|FLASH: driver init failed!, status: 0x8

Since it worked with older version of Redboot I guess the problem should be
quite dumb and someone will tell me the quick trick without me having to
dive deep into the code...  Right?  :-)

Thanks for any hint!


Nicolas


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]