Re: [ECOS] forwarded message from Herb Ledebohm

[Jesper Skov <jskov at cambridge dot redhat dot com>]

>>>>> "Daniel" == Daniel Stenberg <daniel@haxx.se> writes:

[Hi Daniel! :)]

Daniel> On Mon, 5 Mar 2001, Jesper Skov wrote:
>> When building it, I get the following errors:

>> /home/herb/build/install/include/pkgconf/devs_eth_intel_i82559.h:11:
>> `#include' expects "FILENAME" or <FILENAME>
>> /ecos/packages/devs/eth/intel/i82559/current/src/if_i82559.c:116:
>> `#include' expects "FILENAME" or <FILENAME>

Daniel> Well obviously, the 82559 driver (or related code) is not
Daniel> complete. I got these exact same compiler errors when I tried
Daniel> this last week on the CVSed ecos tree. (Using an i386 target.)

Daniel> There are some missing include files and defines that cause
Daniel> this.

Actually, the missing include file is supposed to be provided by the
platform. We've just received the go-ahead to release one of the
platforms using the driver - it should show up in anon CVS in a week
or two.

For now have a look at the files included below.

Cheers,
Jesper


<mips_rm7000_ocelot_eth_drivers.cdl>

# ====================================================================
#
#      ocelot_eth_drivers.cdl
#
#      Ethernet drivers - support for i82559 ethernet controller
#      on the QED Ocelot board.
#
# ====================================================================
#####COPYRIGHTBEGIN####
#                                                                          
# -------------------------------------------                              
# The contents of this file are subject to the Red Hat eCos Public License 
# Version 1.1 (the "License"); you may not use this file except in         
# compliance with the License.  You may obtain a copy of the License at    
# http://www.redhat.com/                                                   
#                                                                          
# Software distributed under the License is distributed on an "AS IS"      
# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
# License for the specific language governing rights and limitations under 
# the License.                                                             
#                                                                          
# The Original Code is eCos - Embedded Configurable Operating System,      
# released September 30, 1998.                                             
#                                                                          
# The Initial Developer of the Original Code is Red Hat.                   
# Portions created by Red Hat are                                          
# Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc.
# All Rights Reserved.                                                     
# -------------------------------------------                              
#                                                                          
#####COPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Contributors:   jskov
# Date:           2001-01-25
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT {
    display       "QED Ocelot board ethernet driver"
    description   "Ethernet driver for QED Ocelot board."

    parent        CYGPKG_IO_ETH_DRIVERS
    active_if	  CYGPKG_IO_ETH_DRIVERS
    active_if     CYGPKG_HAL_MIPS_RM7000_OCELOT

    include_dir   cyg/io

    # FIXME: This really belongs in the INTEL_I82559 package
    cdl_interface CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED {
        display   "Intel i82559 ethernet driver required"
    }

    define_proc {
        puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_INTEL_I82559_INL <cyg/io/devs_eth_mips_rm7000_ocelot.inl>"
        puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_INTEL_I82559_CFG <pkgconf/devs_eth_mips_rm7000_ocelot.h>"
        puts $::cdl_system_header "/*****  ethernet driver proc output end  *****/"
    }

    cdl_component CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0 {
        display       "Ocelot ethernet port 0 driver"
        flavor        bool
        default_value 1
        description   "
            This option includes the ethernet device driver for the
            Ocelot port 0 - that is the connector on the front of
            the board."

        implements CYGHWR_NET_DRIVERS
        implements CYGHWR_NET_DRIVER_ETH0
        implements CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED

        cdl_option CYGDAT_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0_NAME {
            display       "Device name for the ETH0 ethernet port 0 driver"
            flavor        data
            default_value {"\"eth0\""}
            description   "
                This option sets the name of the ethernet device for the
                OMAP port 0."
        }

        cdl_component CYGSEM_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0_SET_ESA {
            display       "Set the ethernet station address"
            flavor        bool
            calculated    1
            description   "Enabling this option will allow the ethernet
            station address to be forced to the value set by the
            configuration.  This may be required if the hardware does
            not include a serial EEPROM for the ESA."
            
            cdl_option CYGDAT_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0_ESA {
                display       "The ethernet station address"
                flavor        data
                default_value {"{0x08, 0x88, 0x12, 0x34, 0x56, 0x78}"}
                description   "The ethernet station address"
            }
        }
    }
}



<devs_eth_mips_rm7000_ocelot.inl>

//==========================================================================
//
//      devs/eth/mips/ocelot/include/devs_eth_mips_rm7000_ocelot.inl
//
//      Ocelot ethernet I/O definitions.
//
//==========================================================================
//####COPYRIGHTBEGIN####
//                                                                          
// -------------------------------------------                              
// The contents of this file are subject to the Red Hat eCos Public License 
// Version 1.1 (the "License"); you may not use this file except in         
// compliance with the License.  You may obtain a copy of the License at    
// http://www.redhat.com/                                                   
//                                                                          
// Software distributed under the License is distributed on an "AS IS"      
// basis, WITHOUT WARRANTY OF ANY KIND, either express or implied.  See the 
// License for the specific language governing rights and limitations under 
// the License.                                                             
//                                                                          
// The Original Code is eCos - Embedded Configurable Operating System,      
// released September 30, 1998.                                             
//                                                                          
// The Initial Developer of the Original Code is Red Hat.                   
// Portions created by Red Hat are                                          
// Copyright (C) 1998, 1999, 2000, 2001 Red Hat, Inc.
// All Rights Reserved.                                                     
// -------------------------------------------                              
//                                                                          
//####COPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   jskov
// Contributors:jskov
// Date:        2001-01-25
// Purpose:     Ocelot ethernet defintions
//####DESCRIPTIONEND####
//==========================================================================

#include <cyg/hal/hal_intr.h>           // CYGNUM_HAL_INTERRUPT_ETHR

#ifdef CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0

#define CYGHWR_INTEL_I82559_PCI_MEM_MAP_BASE (CYGARC_UNCACHED_ADDRESS(0x0ff00000))
#define CYGHWR_INTEL_I82559_PCI_MEM_MAP_SIZE 0x00100000

static I82559 i82559_eth0_priv_data = { 
#ifdef CYGSEM_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0_SET_ESA
    hardwired_esa: 1,
    mac_address: CYGDAT_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0_ESA
#else
    hardwired_esa: 0,
#endif
};

ETH_DRV_SC(i82559_sc0,
           &i82559_eth0_priv_data,      // Driver specific data
           CYGDAT_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0_NAME, // Name for device
           i82559_start,
           i82559_stop,
           i82559_ioctl,
           i82559_can_send,
           i82559_send,
           i82559_recv,
           i82559_deliver,
           i82559_poll,
           i82559_int_vector
    );

NETDEVTAB_ENTRY(i82559_netdev0, 
                "i82559_" CYGDAT_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0_NAME,
                i82559_init, 
                &i82559_sc0);

#endif // CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0


// These arrays are used for sanity checking of pointers
I82559 *
i82559_priv_array[CYGNUM_DEVS_ETH_INTEL_I82559_DEV_COUNT] = {
#ifdef CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0
    &i82559_eth0_priv_data,
#endif
};

#ifdef CYGDBG_USE_ASSERTS
// These are only used when assertions are enabled
cyg_netdevtab_entry_t *
i82559_netdev_array[CYGNUM_DEVS_ETH_INTEL_I82559_DEV_COUNT] = {
#ifdef CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0
    &i82559_netdev0,
#endif
};

struct eth_drv_sc *
i82559_sc_array[CYGNUM_DEVS_ETH_INTEL_I82559_DEV_COUNT] = {
#ifdef CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT_ETH0
    &i82559_sc0,
#endif
};
#endif // CYGDBG_USE_ASSERTS

// EOF devs_eth_mips_rm7000_ocelot.inl