This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Problems with eCos Configuration Tool
- To: ecos-discuss at sourceware dot cygnus dot com
- Subject: [ECOS] Problems with eCos Configuration Tool
- From: "Alexander Drzeniek" <alexander dot drzeniek at strahl dot de>
- Date: Thu, 7 Dec 2000 14:46:38 +0100
Hello All,
i got some problems with eCos configuration tool 1.3.1.1, working
on Win NT or Win2000, using Cygwin 2.24 , HAL for the Atmel
EB01 from Carl van Schaik. If i do some changes at the
Configuration and start the build-process, config-tool stops and
shows this error:
--------------------------------------------------------------------------------
arm-AT91-elf-gcc -c -I//G/cygwin/home/doc_install/include
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/src
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/tests -I.
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/src/double/portable-api/
-mcpu=arm7tdmi -Wall -Wpointer-arith -Wstrict-prototypes -Winline
-Wundef -Woverloaded-virtual
-g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -
fvtable-gc
-finit-priority -Wp,-MD,src/double/portable-api/s_tan.tmp -o
src/double/portable-api/language_c_libm_s_tan.o
//D/Programme/REDHAT~1/eCos/packages/language/c/libm/current
/src/double/portable-api/s_tan.c
arm-AT91-elf-gcc -c -I//G/cygwin/home/doc_install/include
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/src
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/tests -I.
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/src/double/portable-api/
-mcpu=arm7tdmi -Wall -Wpointer-arith -Wstrict-prototypes -Winline
-Wundef -Woverloaded-virtual
-g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -
fvtable-gc
-finit-priority -Wp,-MD,src/double/portable-api/s_modf.tmp -o
src/double/portable-api/language_c_libm_s_modf.o
//D/Programme/REDHAT~1/eCos/packages/language/c/libm/current
/src/double/portable-api/s_modf.c
make[1]: *** No rule to make target `src/double/portable-
api/s_tanh.c ', needed by
`libtarget.a.stamp'. Stop. make[1]: Leaving directory
`/home/doc_build/language/c/libm/current' make: *** [build] Error 2
*** Process 175 terminated (rc=2)
--------------------------------------------------------------------------------
Can anybody help me?
Best Regards
Alexander Drzeniek
-
Ingenieurbuero Strahl * Aderdamm 46 * 40221 Duesseldorf
Telefon 0211-15755-0 * Fax 0211-15755-22
Alexander Drzeniek * Abt. Hardwareentwicklung
Telefon 0211-15755-12 * Fax 0211-15755-20