This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
regarding EP7211
- To: ecos-discuss at sources dot redhat dot com
- Subject: [ECOS] regarding EP7211
- From: "danish iftikhar" <d_iftikhar at hotmail dot com>
- Date: Wed, 04 Oct 2000 19:27:35 GMT
Hi
I have build eCos for EP7211 Cirrus Logic Board .
i build the gdb stubs and downloaded them to the target as specified .
According to documentation it uses UART 1 (of Cirrus board) as GDB serial
port . i initially tried with the default configuration , by keeping both
GDB serial port and Diagnostic port options in ecos.ecc as 0 , ie UART 1 and
i was able to download and run prebuilt as well as examples programs
properly .
But , i want to use the UART 2 port of Cirrus logic for GDB serial comm. ,
for that i tried by making GDB serial port & diagnostic options as 1 (for
UART 2) but it did'nt worked . none of the prebuilt tests are working . Do i
have to enable some other options for that .
i am using HAL_START_UP as RAM in kernel ecos.ecc , i think it is perfectly
fine .
regards
danish.
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.