This is the mail archive of the ecos-devel@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: eCos porting to MPC8555 with WiMax board

From: Gary Thomas <gary at mlbassoc dot com>
To: madhulingeswara reddy vennapusa <madhu dot lingeswar at gmail dot com>
Cc: ecos-devel <ecos-devel at ecos dot sourceware dot org>
Date: Tue, 29 Jan 2008 05:21:44 -0700
Subject: Re: eCos porting to MPC8555 with WiMax board
References: <50b56d240801290044g33ba3dd4re852d79a243a09ff@mail.gmail.com>

madhulingeswara reddy vennapusa wrote:

hai all,
          I am tring to port ecos to MPC 8555 processor with WiMax
board. I found major areas that needs to be change and those are
serial,ethernet drivers, inturrupt handling, memory management. now my
quetions are

Does porting eCos to a new processor depend on both processor and board?
Is there any other areas that need to be change?
I am thinking to use MPC 8260 as base line is it correct or not?
plz some one clear my doubts at the earliest.

Have you read the porting guide in the documentation?

--
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

References:
- eCos porting to MPC8555 with WiMax board
  - From: madhulingeswara reddy vennapusa

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]