This is the mail archive of the
ecos-devel@sourceware.org
mailing list for the eCos project.
Re: RedBoot built with gcc 3.4.4
- From: Edgar Grimberg <edgar dot grimberg at zylin dot com>
- To: Guennadi Liakhovetski <gl at dsa-ac dot de>, ecos-devel at ecos dot sourceware dot org
- Date: Wed, 07 Feb 2007 14:55:40 +0200
- Subject: Re: RedBoot built with gcc 3.4.4
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:reply-to:organization:user-agent:mime-version:to:subject:references:in-reply-to:content-type:content-transfer-encoding:sender; b=AySppFHfF03keBplPS9OUF23EsND1ITUhZoGlM+iSffKbD0d6suJ7cZresu23MeSFrPChP34Ik0Xx7tpqPr8P61glrWv43X/BzHaF3TdOgZas9PZhwj6AvzuQNPBZ/zeVZ6co6VCtKUO0oZsHVWdrVCNFVsrT2IQ8AnjZ/fAZgg=
- Organization: Zylin AS, Norway
- References: <Pine.LNX.4.63.0702071233491.1799@pcgl.dsa-ac.de> <20070207121127.GK19508@lunn.ch> <Pine.LNX.4.63.0702071341070.1799@pcgl.dsa-ac.de>
- Reply-to: edgar dot grimberg at zylin dot com
Ok, a short look through eCos / RedBoot docs didn't reveal anything.
Could you, please, give some short instructions? I used gdb also
remotely, but with the bdi2000 stub... And never heard of such cryptic
lines. How do I debug it? I'll try to look further.
Replace the
target remote <IP>:2001
with
target remote <serial_channel>
Using gdb:
(gdb) help target remote
Use a remote computer via a serial line, using a gdb-specific protocol.
Specify the serial device it is connected to
(e.g. /dev/ttyS0, /dev/ttya, COM1, etc.).
Edgar
PS: if you have the BDI2000 connected to the target, you better use that
instead of serial debugging.