This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.
See crosstool-NG for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
On Fri, Nov 27, 2015 at 2:24 PM, Thies Peter Thiesen <Thies-Peter.Thiesen@gmx.de> wrote: > Hello all! Date: 2015-11-27 (Fr 27 Nov 2015) > > ich have installed the now current cygwin environment. > cygwin version > uname -srv > CYGWIN_NT-6.1-WOW 2.3.1(0.291/5/3) 2015-11-14 12:42 > > I try to build a powerpc cross compiler > ct-ng powerpc-unknown-linux-gnu > ct-ng menuconfig (used the defaults and enable the debug) > ct-ng build > [INFO ] Performing some trivial sanity checks > [INFO ] Build started 20151127.095926 > [INFO ] Building environment variables > [EXTRA] Preparing working directories > [EXTRA] Installing user-supplied crosstool-NG configuration > [EXTRA] ================================================================= > [EXTRA] Dumping internal crosstool-NG configuration > [EXTRA] Building a toolchain for: > [EXTRA] build = i686-pc-cygwin > [EXTRA] host = i686-pc-cygwin > [EXTRA] target = powerpc-unknown-linux-gnu > [EXTRA] Dumping internal crosstool-NG configuration: done in 0.78s (at 03:35) > [INFO ] ================================================================= > [INFO ] Retrieving needed toolchain components' tarballs > [INFO ] Retrieving needed toolchain components' tarballs: done in 2.37s (at 03:37) > [INFO ] ================================================================= > [INFO ] Extracting and patching toolchain components > [INFO ] Extracting and patching toolchain components: done in 9.09s (at 03:46) > [INFO ] Saving state to restart at step 'libc_check_config'... > [INFO ] Saving state to restart at step 'companion_libs_for_build'... > [INFO ] ================================================================= > [INFO ] Installing ncurses for build > [EXTRA] Configuring ncurses > [EXTRA] Building ncurses > [EXTRA] Installing ncurses > [INFO ] Installing ncurses for build: done in 242.70s (at 07:52) > [INFO ] ================================================================= > [INFO ] Installing libiconv for build > [EXTRA] Configuring libiconv > [EXTRA] Building libiconv > [EXTRA] Installing libiconv > [ERROR] collect2: error: ld returned 1 exit status > [ERROR] make[2]: *** [install] Error 1 > [ERROR] make[1]: *** [install] Error 2 > [ERROR] > [ERROR] >> > [ERROR] >> Build failed in step 'Installing libiconv for build' > [ERROR] >> called in step '(top-level)' > [ERROR] >> > [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@257] > [ERROR] >> called from: do_libiconv_backend[scripts/build/companion_libs/320-libiconv.sh@111] > [ERROR] >> called from: do_libiconv_for_build[scripts/build/companion_libs/320-libiconv.sh@39] > [ERROR] >> called from: do_companion_libs_for_build[scripts/build/companion_libs.sh@29] > [ERROR] >> called from: main[scripts/crosstool-NG.sh@646] > > build.log > [ALL ] cd src && /usr/bin/make install prefix='/usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools' exec_prefix='/usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools' libdir='/usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/lib' > [ALL ] make[2]: Entering directory '/usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/build/build-libiconv-build-i686-build_pc-cygwin/src' > [ALL ] test `ls -ld . | sed -e 's/^d(.........).*/1/'` = rwxrwxrwx || chmod 777 . > [ALL ] if [ ! -d /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/bin ] ; then /bin/sh /usr/home2/crosstool_1_22/.build/src/libiconv-1.14/build-aux/mkinstalldirs /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/bin ; fi > [ALL ] case "cygwin" in hpux*) i686-build_pc-cygwin-gcc -O2 -g -O2 -g `if test -n ''; then /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/bin; fi` iconv.o ../srclib/libicrt.a -L/usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/lib -liconv -lintl iconv.res `if test -n ''; then echo " -Wl,+b -Wl,/usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/lib"; fi` -o iconv.exe;; *) /usr/bin/bash ../libtool --mode=link i686-build_pc-cygwin-gcc -O2 -g -O2 -g `if test -n ''; then /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/bin; fi` iconv.o ../srclib/libicrt.a /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/lib/libiconv.la -lintl iconv.res -o iconv.exe;; esac > [ALL ] libtool: link: i686-build_pc-cygwin-gcc -O2 -g -O2 -g iconv.o iconv.res -o iconv.exe ../srclib/libicrt.a /usr/lib/libintl.dll.a /usr/lib/libiconv.dll.a /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/lib/libiconv.a > [ALL ] /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/lib/libiconv.a(iconv.o): In function `libiconv_open': > [ALL ] /usr/home2/crosstool_1_22/.build/src/libiconv-1.14/lib/iconv.c:219: multiple definition of `libiconv_open' > [ALL ] /usr/lib/libiconv.dll.a(d000009.o):(.text+0x0): first defined here > [ALL ] /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/lib/libiconv.a(iconv.o): In function `libiconv': > [ALL ] /usr/home2/crosstool_1_22/.build/src/libiconv-1.14/lib/iconv.c:249: multiple definition of `libiconv' > [ALL ] /usr/lib/libiconv.dll.a(d000007.o):(.text+0x0): first defined here > [ALL ] /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/lib/libiconv.a(iconv.o): In function `libiconv_close': > [ALL ] /usr/home2/crosstool_1_22/.build/src/libiconv-1.14/lib/iconv.c:260: multiple definition of `libiconv_close' > [ALL ] /usr/lib/libiconv.dll.a(d000008.o):(.text+0x0): first defined here > [ALL ] /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/lib/libiconv.a(iconv.o): In function `libiconvctl': > [ALL ] /usr/home2/crosstool_1_22/.build/src/libiconv-1.14/lib/iconv.c:303: multiple definition of `libiconvctl' > [ALL ] /usr/lib/libiconv.dll.a(d000013.o):(.text+0x0): first defined here > [ALL ] /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/lib/libiconv.a(iconv.o): In function `libiconvlist': > [ALL ] /usr/home2/crosstool_1_22/.build/src/libiconv-1.14/lib/iconv.c:378: multiple definition of `libiconvlist' > [ALL ] /usr/lib/libiconv.dll.a(d000014.o):(.text+0x0): first defined here > [ALL ] /usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/buildtools/lib/libiconv.a(iconv.o): In function `iconv_canonicalize': > [ALL ] /usr/home2/crosstool_1_22/.build/src/libiconv-1.14/lib/iconv.c:488: multiple definition of `iconv_canonicalize' > [ALL ] /usr/lib/libiconv.dll.a(d000006.o):(.text+0x0): first defined here > [ERROR] collect2: error: ld returned 1 exit status > [ALL ] Makefile:113: recipe for target 'install' failed > [ERROR] make[2]: *** [install] Error 1 > [ALL ] make[2]: Leaving directory '/usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/build/build-libiconv-build-i686-build_pc-cygwin/src' > [ALL ] Makefile:52: recipe for target 'install' failed > [ERROR] make[1]: *** [install] Error 2 > [ALL ] make[1]: Leaving directory '/usr/home2/crosstool_1_22/.build/powerpc-unknown-linux-gnu/build/build-libiconv-build-i686-build_pc-cygwin' > [ERROR] > [ERROR] >> > [ERROR] >> Build failed in step 'Installing libiconv for build' > [ERROR] >> called in step '(top-level)' > [ERROR] >> > [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@257] > [ERROR] >> called from: do_libiconv_backend[scripts/build/companion_libs/320-libiconv.sh@111] > [ERROR] >> called from: do_libiconv_for_build[scripts/build/companion_libs/320-libiconv.sh@39] > [ERROR] >> called from: do_companion_libs_for_build[scripts/build/companion_libs.sh@29] > [ERROR] >> called from: main[scripts/crosstool-NG.sh@646] > > Current command: > '/usr/bin/make' 'install' 'CC=i686-build_pc-cygwin-gcc -O2 -g ' > exited with error code: 2 > Please fix it up and finish by exiting the shell with one of these values: > 1 fixed, continue with next build command > 2 repeat this build command > 3 abort build > ct-ng:~/crosstool_1_22/.build/powerpc-unknown-linux-gnu/build/build-libiconv-build-i686-build_pc-cygwin> > > > What can I do to get it running? Please list the output of: cygcheck -c For now, you could uninstall your iconv package as that's causing a conflict here. I will look into making sure that it doesn't conflict. You could also create a new cygwin installation and install *only* the packages listed here: https://github.com/crosstool-ng/crosstool-ng/blob/master/docs/C%20-%20Misc.%20tutorials.txt#L336 Thanks, Ray. > > Thanks, > Thies Peter > > -- > For unsubscribe information see http://sourceware.org/lists.html#faq > -- For unsubscribe information see http://sourceware.org/lists.html#faq
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |