This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.

See crosstool-NG for lots more information.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: Can't build crosstool-NG with some problem

From: Thomas Petazzoni <thomas dot petazzoni at free-electrons dot com>
To: Khem Raj <raj dot khem at gmail dot com>
Cc: Seongjin Kim <sjkim dot sangji at gmail dot com>, crossgcc at sourceware dot org
Date: Mon, 16 Jul 2012 10:02:34 +0200
Subject: Re: Can't build crosstool-NG with some problem
References: <CAP_+jtxBg7b+JA6gUUZ_DmCC4-unBJF8BboM=g-ZSr3EWQY3eg@mail.gmail.com> <CAMKF1sqVW2WuahjMgBN2eht8NJf8ESZbxp2y+4vazdNqPutGyQ@mail.gmail.com>

Le Sun, 8 Jul 2012 21:39:21 -0700,
Khem Raj <raj.khem@gmail.com> a Ãcrit :

> you need the ppl dev package install that one whatever it is called
> for your host distro

Hum, no: Crosstool-NG is supposed to build its own version of PPL.

Seongjin: make sure that you have selected PPL version 0.11 in 'ct-ng
menuconfig'. Depending on the gcc version, the required PPL version is
different, and Crosstool-NG doesn't automatically ensure that the
correct version of PPL is used.

Regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

--
For unsubscribe information see http://sourceware.org/lists.html#faq

Follow-Ups:
- Re: Can't build crosstool-NG with some problem
  - From: Yann E. MORIN

References:
- Can't build crosstool-NG with some problem
  - From: Seongjin Kim
- Re: Can't build crosstool-NG with some problem
  - From: Khem Raj

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]