Re: SUCCESS!!!! Update: Still with Build failure for PPC405 using crosstool-ng-1.9.2

[Bryan Hundven <bryanhundven at gmail dot com>]

On Thu, Jan 20, 2011 at 5:06 PM, Chris Kerios <ckerios@cfl.rr.com> wrote:
> On 01/20/2011 06:53 PM, Bryan Hundven wrote:
>>
>> On Thu, Jan 20, 2011 at 3:45 PM, Chris Kerios<ckerios@cfl.rr.com> Âwrote:
>>>
>>> On 01/20/2011 06:28 PM, Bryan Hundven wrote:
>>>>
>>>> On Thu, Jan 20, 2011 at 3:23 PM, Chris Kerios<ckerios@cfl.rr.com>
>>>> Âwrote:
>>>>>
>>>>> On 01/20/2011 05:52 PM, Bryan Hundven wrote:
>>>>>>
>>>>>> On Thu, Jan 20, 2011 at 2:43 PM, Chris Kerios<ckerios@cfl.rr.com>
>>>>>> Âwrote:
>>>>>>>
>>>>>>> On Thu, Jan 20, 2011 at 6:15 AM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Â Â Âwrote:
>>>>>>>>
>>>>>>>> -----Original Message-----
>>>>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>>>>> Sent: Thursday, January 20, 2011 1:17 AM
>>>>>>>> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>>>>> Cc: Bryan Hundven; crossgcc maillist
>>>>>>>> Subject: Re: Update: Still with Build failure for PPC405 using
>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>
>>>>>>>> On Wed, Jan 19, 2011 at 6:32 PM, Khem Raj<raj.khem@gmail.com>
>>>>>>>> Âwrote:
>>>>>>>>>
>>>>>>>>> On Wed, Jan 19, 2011 at 6:14 PM, Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Â Â Âwrote:
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Sent from my iPad
>>>>>>>>>>
>>>>>>>>>> On Jan 19, 2011, at 8:51 PM, "Bryan
>>>>>>>>>> Hundven"<bryanhundven@gmail.com>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>>> On Wed, Jan 19, 2011 at 3:00 PM, Kerios, Chris
>>>>>>>>>>> (KSC-ASRC-466)[ASRC
>>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Â Â Âwrote:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Sent from my iPad
>>>>>>>>>>>>
>>>>>>>>>>>> On Jan 19, 2011, at 5:55 PM, "Bryan
>>>>>>>>>>>> Hundven"<bryanhundven@gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Jan 19, 2011 at 2:41 PM, Kerios, Chris
>>>>>>>>>>>>> (KSC-ASRC-466)[ASRC
>>>>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Â Â Âwrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Great! I'm happy to hear you were able to reproduce. So I'm
>>>>>>>>>>>>>> not
>>>>>>>>>>>>>> or
>>>>>>>>>>>>>> wasting your time.
>>>>>>>>>>>>>> Thanks
>>>>>>>>>>>>>
>>>>>>>>>>>>> Opps, with the build.log.bz2 email we went off list for a
>>>>>>>>>>>>> moment.
>>>>>>>>>>>>> This
>>>>>>>>>>>>> email mostly to bring the conversation back to the list.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Chris,
>>>>>>>>>>>>>
>>>>>>>>>>>>> As I asked before, it would be nice if you didn't top post.
>>>>>>>>>>>>> Reason being is that Khem's response is now at the bottom of
>>>>>>>>>>>>> the
>>>>>>>>>>>>> email
>>>>>>>>>>>>> (like it should be), and your responses are at the top, making
>>>>>>>>>>>>> the
>>>>>>>>>>>>> email hard to read.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Sent from my iPad
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Jan 19, 2011, at 5:35 PM, "Khem Raj"<raj.khem@gmail.com>
>>>>>>>>>>>>>> Âwrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Wed, Jan 19, 2011 at 11:33 AM, Kerios, Chris
>>>>>>>>>>>>>>> (KSC-ASRC-466)[ASRC
>>>>>>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Â Â Âwrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Bryan/Khem,
>>>>>>>>>>>>>>>> Here is the last build.log file. ÄI set the log mode to
>>>>>>>>>>>>>>>> ERROR.
>>>>>>>>>>>>>>>> So
>>>>>>>>>>>>>>>> it may not have everything you want so I can run it again
>>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>> Deeper log level if you need me to.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>> From: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>>>>>>>>>>>>> Sent: Wednesday, January 19, 2011 2:23 PM
>>>>>>>>>>>>>>>> To: 'Khem Raj'; Bryan Hundven
>>>>>>>>>>>>>>>> Cc: crossgcc@sourceware.org
>>>>>>>>>>>>>>>> Subject: RE: Update: Still with Build failure for PPC405
>>>>>>>>>>>>>>>> using
>>>>>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Bryan/Raj,
>>>>>>>>>>>>>>>> I've attached to output from the cross-compiler you
>>>>>>>>>>>>>>>> requested.
>>>>>>>>>>>>>>>> ÄThere's a core and static directories where these files
>>>>>>>>>>>>>>>> were
>>>>>>>>>>>>>>>> located. ÄThe
>>>>>>>>>>>>>>>> output was the same so I am just sending the shared one.
>>>>>>>>>>>>>>>> ÄIt's
>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>> small file
>>>>>>>>>>>>>>>> so I've just attached it. ÄI working on compressing the
>>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>>> log and will
>>>>>>>>>>>>>>>> get that out to you shortly.
>>>>>>>>>>>>>>>> Chris
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>>>>>>>>>>>>> Sent: Wednesday, January 19, 2011 2:03 PM
>>>>>>>>>>>>>>>> To: Bryan Hundven
>>>>>>>>>>>>>>>> Cc: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP];
>>>>>>>>>>>>>>>> crossgcc@sourceware.org
>>>>>>>>>>>>>>>> Subject: Re: Update: Still with Build failure for PPC405
>>>>>>>>>>>>>>>> using
>>>>>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Jan 19, 2011 at 10:26 AM, Bryan Hundven
>>>>>>>>>>>>>>>> <bryanhundven@gmail.com> Â Â Âwrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Wed, Jan 19, 2011 at 10:15 AM, Kerios, Chris
>>>>>>>>>>>>>>>>> (KSC-ASRC-466)[ASRC
>>>>>>>>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Â Â Âwrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> OK, let's see if I can get all this for you:
>>>>>>>>>>>>>>>>>> On my host machine that I am trying to build for:
>>>>>>>>>>>>>>>>>> x86 - Fedora 14
>>>>>>>>>>>>>>>>>> gcc 4.5.1
>>>>>>>>>>>>>>>>>> binutils 2.20
>>>>>>>>>>>>>>>>>> linux 2.6.35
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> For my target/embedded host I am trying to build a cross
>>>>>>>>>>>>>>>>>> toolchain which I am pasting in the beginning of the
>>>>>>>>>>>>>>>>>> build.log:
>>>>>>>>>>>>>>>>>> [INFO ] ÄPerforming some trivial sanity checks [INFO ]
>>>>>>>>>>>>>>>>>> ÄBuild
>>>>>>>>>>>>>>>>>> started
>>>>>>>>>>>>>>>>>> 20110119.130036 [INFO ] ÄBuilding environment variables
>>>>>>>>>>>>>>>>>> [WARN
>>>>>>>>>>>>>>>>>> ]
>>>>>>>>>>>>>>>>>> Directory '/home/chris/src' does not exist.
>>>>>>>>>>>>>>>>>> [WARN ] ÄWill not save downloaded tarballs to local
>>>>>>>>>>>>>>>>>> storage.
>>>>>>>>>>>>>>>>>> [EXTRA] ÄPreparing working directories [EXTRA] ÄInstalling
>>>>>>>>>>>>>>>>>> user-supplied crosstool-NG configuration [EXTRA]
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> =================================================================
>>>>>>>>>>>>>>>>>> [EXTRA] ÄDumping internal crosstool-NG configuration
>>>>>>>>>>>>>>>>>> [EXTRA]
>>>>>>>>>>>>>>>>>> Building a toolchain for:
>>>>>>>>>>>>>>>>>> [EXTRA] Ä Ä Äbuild Ä= i686-pc-linux-gnu [EXTRA] Ä Ä Ähost
>>>>>>>>>>>>>>>>>> Ä
>>>>>>>>>>>>>>>>>> =
>>>>>>>>>>>>>>>>>> i686-pc-linux-gnu [EXTRA] Ä Ä Ätarget =
>>>>>>>>>>>>>>>>>> powerpc-405-linux-gnu
>>>>>>>>>>>>>>>>>> [EXTRA]
>>>>>>>>>>>>>>>>>> Dumping internal crosstool-NG configuration: done in 0.46s
>>>>>>>>>>>>>>>>>> (at
>>>>>>>>>>>>>>>>>> 00:05)
>>>>>>>>>>>>>>>>>> [INFO ]
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> =================================================================
>>>>>>>>>>>>>>>>>> [INFO ] ÄRetrieving needed toolchain components' tarballs
>>>>>>>>>>>>>>>>>> [EXTRA]
>>>>>>>>>>>>>>>>>> Retrieving 'linux-2.6.31.14'
>>>>>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'gmp-4.3.2'
>>>>>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'mpfr-2.4.2'
>>>>>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'binutils-2.19.1'
>>>>>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'gcc-4.3.2'
>>>>>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'eglibc-2_10'
>>>>>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'dmalloc-5.5.2'
>>>>>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'duma_2_5_15'
>>>>>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'gdb-6.8'
>>>>>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'ncurses-5.7'
>>>>>>>>>>>>>>>>>> [EXTRA] Ä ÄRetrieving 'expat-2.0.1'
>>>>>>>>>>>>>>>>>> [INFO ] ÄRetrieving needed toolchain components' tarballs:
>>>>>>>>>>>>>>>>>> done
>>>>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>>>>> 601.03s (at 10:07) [INFO ]
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> =================================================================
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Chris,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Could you post your config somewhere? Preferably on
>>>>>>>>>>>>>>>>> pastbin.com.
>>>>>>>>>>>>>>>>> I want to try installing fc14 and see if I can reproduce
>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>> issue.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>>>>>>>>>>>>>>> Sent: Wednesday, January 19, 2011 12:55 PM
>>>>>>>>>>>>>>>>>> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>>>>>>>>>>>>>>> Cc: crossgcc@sourceware.org
>>>>>>>>>>>>>>>>>> Subject: Re: Update: Still with Build failure for PPC405
>>>>>>>>>>>>>>>>>> using
>>>>>>>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, Jan 19, 2011 at 9:49 AM, Kerios, Chris
>>>>>>>>>>>>>>>>>> (KSC-ASRC-466)[ASRC
>>>>>>>>>>>>>>>>>> AEROSPACE CORP]<chris.kerios@nasa.gov> Â Â Âwrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hi Raj,
>>>>>>>>>>>>>>>>>>> Hmmm...I just tried rebuilding 1.9.2 with eglibc 2.10 and
>>>>>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>>>>>> stopped and errored out at the same spot with the same
>>>>>>>>>>>>>>>>>>> error.
>>>>>>>>>>>>>>>>>>> 2.10 is the only other release offered in the 1.9.2
>>>>>>>>>>>>>>>>>>> menuconfig.
>>>>>>>>>>>>>>>>>>> ÄI
>>>>>>>>>>>>>>>>>>> would send you my build.log except that is over 16MB
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> bzip2 build.log
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> If you want, you can send the bzip'd log file to me
>>>>>>>>>>>>>>>>> directly,
>>>>>>>>>>>>>>>>> bypassing the list.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Khem, if you would like the bzip'd log as well, I will
>>>>>>>>>>>>>>>>> forward
>>>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>>>> to you.
>>>>>>>>>>>>>>>>> Just trying to save space on the ml-server.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> yes please do send me.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> and my email system won't transfer it. ÄI also tried
>>>>>>>>>>>>>>>>>>> pastebin.com
>>>>>>>>>>>>>>>>>>> but they will only take up to 1MB. ÄIs there anything
>>>>>>>>>>>>>>>>>>> specific
>>>>>>>>>>>>>>>>>>> in
>>>>>>>>>>>>>>>>>>> the build log I can send you? ÄCurrently, the debug level
>>>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>>>> set to EXTRA. ÄI can back this down and it should cut
>>>>>>>>>>>>>>>>>>> down
>>>>>>>>>>>>>>>>>>> on
>>>>>>>>>>>>>>>>>>> some of the
>>>>>>>>>>>>>>>>>>> file size.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> hmmm ok. What version of gcc and binutils are you using ?
>>>>>>>>>>>>>>>>>> btw
>>>>>>>>>>>>>>>>>> can you
>>>>>>>>>>>>>>>>>> run<cross>-gcc -v -xc /dev/null and post the output ?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Khem,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Either build that Chris has ran have not produced the final
>>>>>>>>>>>>>>>>> toolchain.
>>>>>>>>>>>>>>>>> Did you mean:<host>-gcc -v -xc /dev/null -v -xc /d
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> no he should have an intermediate gcc already built before
>>>>>>>>>>>>>>>> building eglibc thats the one I was interested in.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> ?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>>> Chris
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> -----Original Message-----
>>>>>>>>>>>>>>>>>>> From: Khem Raj [mailto:raj.khem@gmail.com]
>>>>>>>>>>>>>>>>>>> Sent: Tuesday, January 18, 2011 11:44 PM
>>>>>>>>>>>>>>>>>>> To: Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP]
>>>>>>>>>>>>>>>>>>> Cc: crossgcc@sourceware.org
>>>>>>>>>>>>>>>>>>> Subject: Re: Update: Still with Build failure for PPC405
>>>>>>>>>>>>>>>>>>> using
>>>>>>>>>>>>>>>>>>> crosstool-ng-1.9.2
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On (18/01/11 14:45), Kerios, Chris (KSC-ASRC-466)[ASRC
>>>>>>>>>>>>>>>>>>> AEROSPACE CORP] wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hello again,
>>>>>>>>>>>>>>>>>>>> I think I have worked my way through enough builds, etc.
>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>> form a coherent email regarding my cross tool build
>>>>>>>>>>>>>>>>>>>> effort
>>>>>>>>>>>>>>>>>>>> and problem. ÄI
>>>>>>>>>>>>>>>>>>>> have attached two files of the Äbuild logs that show
>>>>>>>>>>>>>>>>>>>> where
>>>>>>>>>>>>>>>>>>>> the builds are
>>>>>>>>>>>>>>>>>>>> breaking. I cannot send the whole log as my email system
>>>>>>>>>>>>>>>>>>>> won't pass it. ÄAs
>>>>>>>>>>>>>>>>>>>> I am not a gnu tools expert I can only pursue the most
>>>>>>>>>>>>>>>>>>>> elementary fixes of
>>>>>>>>>>>>>>>>>>>> which I can't decipher these. ÄI've looked through the
>>>>>>>>>>>>>>>>>>>> mailing list as well.
>>>>>>>>>>>>>>>>>>>> First the configuration:
>>>>>>>>>>>>>>>>>>>> Host build machine: x86, Fedora Core 14 with most recent
>>>>>>>>>>>>>>>>>>>> updates applied.
>>>>>>>>>>>>>>>>>>>> Target machine: MPL powerpc-405gp
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Per my email from last week I received a suggestion to
>>>>>>>>>>>>>>>>>>>> back
>>>>>>>>>>>>>>>>>>>> port my make version from the Fedora 14 version of make
>>>>>>>>>>>>>>>>>>>> 3.82
>>>>>>>>>>>>>>>>>>>> to make 3.81.
>>>>>>>>>>>>>>>>>>>> ÄI have done this and the build goes significantly
>>>>>>>>>>>>>>>>>>>> further
>>>>>>>>>>>>>>>>>>>> than before. ÄThe
>>>>>>>>>>>>>>>>>>>> build is now breaking during "Installing C library". ÄIt
>>>>>>>>>>>>>>>>>>>> appears to be
>>>>>>>>>>>>>>>>>>>> looking for -lgcc and not finding it. ÄIn looking at the
>>>>>>>>>>>>>>>>>>>> gcc
>>>>>>>>>>>>>>>>>>>> command above
>>>>>>>>>>>>>>>>>>>> it there is a section after the 4.3.2 which looks wrong
>>>>>>>>>>>>>>>>>>>> as
>>>>>>>>>>>>>>>>>>>> it has a bunch of
>>>>>>>>>>>>>>>>>>>> ../../.. but I can't be sure and I don't know where all
>>>>>>>>>>>>>>>>>>>> these paths are
>>>>>>>>>>>>>>>>>>>> defined. ÄThe make 3.82 build breaks immediately at the
>>>>>>>>>>>>>>>>>>>> "Installing kernel
>>>>>>>>>>>>>>>>>>>> headers" phase.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> As another data point I have built crosstool
>>>>>>>>>>>>>>>>>>>> successfully
>>>>>>>>>>>>>>>>>>>> on
>>>>>>>>>>>>>>>>>>>> the 1.6.[0-2] versions. ÄStarting on versions 1.7 and
>>>>>>>>>>>>>>>>>>>> beyond
>>>>>>>>>>>>>>>>>>>> these problems
>>>>>>>>>>>>>>>>>>>> appear. ÄI don't know if anyone has built for PPC 405 in
>>>>>>>>>>>>>>>>>>>> a
>>>>>>>>>>>>>>>>>>>> while so this may
>>>>>>>>>>>>>>>>>>>> be why these problems cropped up and weren't identified.
>>>>>>>>>>>>>>>>>>>> ÄAnyway, any help
>>>>>>>>>>>>>>>>>>>> on this would be appreciated as I'm not all that keen on
>>>>>>>>>>>>>>>>>>>> running 1.6.2 if I
>>>>>>>>>>>>>>>>>>>> don't have to. ÄI would like to stay current.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> If you really do not need to stick to eglibc 2.9 then I
>>>>>>>>>>>>>>>>>>> would
>>>>>>>>>>>>>>>>>>> suggest to use 2.12 if possible.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Can you post all logs somewhere I could not infer what
>>>>>>>>>>>>>>>>>>> could
>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>> wrong from the Äattached logs
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> -Khem
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> -Bryan
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> OK the problem is reproducible with your config. What I see
>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>> gcc-shared installs symlink to shared libgcc but does not
>>>>>>>>>>>>>>> install
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> shared libgcc itself
>>>>>>>>>>>>>>> into the temporary sysroot its using. I am still waiting on
>>>>>>>>>>>>>>> validating
>>>>>>>>>>>>>>> this (my system is really slow). I see that ct-ng called make
>>>>>>>>>>>>>>> install-libgcc I hope that should
>>>>>>>>>>>>>>> have done the job but it seems it did not.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Khem,
>>>>>>>>>>>>>
>>>>>>>>>>>>> My build is much slower then your's. ugh... vmware fusion...
>>>>>>>>>>>>>
>>>>>>>>>>>>> Now that I have a fc14 install, I am going to see what I can do
>>>>>>>>>>>>> about
>>>>>>>>>>>>> these make 3.82 issues.
>>>>>>>>>>>>>
>>>>>>>>>>>>> -Bryan
>>>>>>>>>>>>
>>>>>>>>>>>> Oops sorry...understood.
>>>>>>>>>>>
>>>>>>>>>>> No problems.
>>>>>>>>>>>
>>>>>>>>>>> So I was also able to reproduce the build issue with make 3.81 on
>>>>>>>>>>> fc14.
>>>>>>>>>>> I then tried to build 4.3.5 to see if that release fixes this
>>>>>>>>>>> issue.
>>>>>>>>>>> It also broke in the same spot with the same error.
>>>>>>>>>>>
>>>>>>>>>>> Chris, would you have any problem moving to gcc-4.4? Or do you
>>>>>>>>>>> need
>>>>>>>>>>> 4.3.x for reason?
>>>>>>>>>>> I'm going to try building 4.4.5 tonight, and my hope is that it
>>>>>>>>>>> installs libgcc correctly.
>>>>>>>>>>>
>>>>>>>>>>> -Bryan
>>>>>>>>>>
>>>>>>>>>> I have no problems at all going to 4.4. Are you thinking its a gcc
>>>>>>>>>> issue?
>>>>>>>>>
>>>>>>>>> OK then please try with gcc 4.5.2 or 4.4.4
>>>>>>>>>
>>>>>>>>
>>>>>>>> I tried with gcc 4.5.2 and 4.4.4 both install libgcc_s.so.1
>>>>>>>> correclty
>>>>>>>> and the build passes this point of failure
>>>>>>>>
>>>>>>>> Good Morning,
>>>>>>>> I just tried building it with 4.4.4 and was unsuccessful. ÄIt's not
>>>>>>>> getting past the CLoog/ppl build. ÄJust a reminder, I am on x86
>>>>>>>> Fedora
>>>>>>>> 14
>>>>>>>> and had binutils 2.20.1 and eglibc 2.10 selected. ÄAlso, I am still
>>>>>>>> using
>>>>>>>> make 3.81 as it blows up right in the beginning on the kernel
>>>>>>>> headers
>>>>>>>> steps.
>>>>>>>> ÄI have attached the build.log. ÄI am going to try a 4.5.1. build
>>>>>>>> now.
>>>>>>>> ÄRaj,
>>>>>>>> what are you using for a host build environment?
>>>>>>>> Regards,
>>>>>>>> Chris
>>>>>>>>
>>>>>>>
>>>>>>> Here is a modified version of your .config that built a 4.5.2 based
>>>>>>> toolchain successfully
>>>>>>> on ubuntu 10.04/x86
>>>>>>>
>>>>>>> -Khem
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Sorry Khem, but the build does not work on Fedora 14 with your config
>>>>>>> file.
>>>>>>> ÂThere must be some difference(s) that are causing these problems we
>>>>>>> are
>>>>>>> seeing. ÂDebian vs. Fedora. Âeglibc based system vs. glibc based
>>>>>>> system???
>>>>>>> ÂI have attached the build.log. ÂIt dies early when it begins the
>>>>>>> CLooG
>>>>>>> build.
>>>>>>>
>>>>>>> Bryan: Have you had any luck with your Fedora system?
>>>>>>>
>>>>>>> Regards,
>>>>>>> Chris
>>>>>>>
>>>>>>> Attachment: .config
>>>>>>> Description: Binary data
>>>>>>>
>>>>>>
>>>>>> I downgraded cloog-ppl to 0.15.9 and am using gcc-4.4.5, and now I get
>>>>>> a problem while building the static core gcc where it can't find
>>>>>> -lstdc++. I think this is a problem with either cloog-ppl or binutils.
>>>>>> Not sure yet.
>>>>>> *grumble*
>>>>>>
>>>>>> It sounds like this architecture/distribution combination needs some
>>>>>> love.
>>>>>>
>>>>>> Attached is my current config:
>>>>>
>>>>> I was just reading the archive and noticed there is a patch for the
>>>>> CLooG/ppl problem that I am encountering. I've applied the patch and
>>>>> have
>>>>> started another build. ÂDisregard my previous email on that problem. I
>>>>> will
>>>>> let everyone know how this next build goes.
>>>>
>>>> Ah, I made a mistake then. I thought that patch was in 1.9.2. (From my
>>>> conversation in another thread with Yann.)
>>>> I will try that as well.
>>>>
>>>>> I didn't realize the static libstdc++ is needed. ÂI am downloading and
>>>>> installing now.
>>>>
>>>> Right, the static libstdc++ is part of the libstdc++6 dev package on
>>>> debian. We should document this.
>>>>
>>>> -Bryan
>>>>
>>>
>>> It bombed. ÂHere are the config files. I saw no real difference in our
>>> config files.
>>>
>>> Let me know if you want me to run another config.
>>>
>>
>> It bombed because you need
>> CT_LIBC_GLIBC_EXTRA_CFLAGS="-U_FORTIFY_SOURCE"
>> in your .config
>>
>> Try that and let me know how it goes.
>>
>> -Bryan
>>
>
> SUCCESS!

Great! My build is still running.

> After putting in the compiler config parameter Bryan sent, it went all the
> way through. ÂYea! ÂLet me summarize all the changes I/we went through to
> get this to work.
>
> Build Host: x86/Fedora 14
> 1) Used make 3.81 instead of distribution version 3.82

I'm going to look into patches to get 3.82 working.
It sounds like packaging make 3.81 will be too much:
http://sourceware.org/ml/crossgcc/2011-01/msg00053.html

and there are already some patches on this list to fix 3.82:
http://sourceware.org/ml/crossgcc/2011-01/msg00057.html

But now that I have an fc14 vm, I will see what else I find.

> 2) Applied CLoog/ppl patch referenced in earlier emails

This should be in 1.9 tip:
http://ymorin.is-a-geek.org/hg/crosstool-ng/rev/2b25e1dab615

So it will be in 1.9.3 and 2.0(?)...

> 3) Installed static libstdc++ lib, also had libc static already installed
> previously

Here I think we should stat the file returned by:
<host>-gcc -print-file-name=libstdc++.a

and if it turns out to be a non-existent file, then bail and warn
about static libstdc++ missing.

> 4) Set library for eglibc instead of glibc <- don't know if it makes a
> difference, will have to run some more builds to see.

Shouldn't make a difference. eglibc is source compatible with glibc. (in theory)

> 5) Set CT_LIBC_GLIBC_EXTRA_CFLAGS="-U_FORTIFY_SOURCE"

I'm thinking we should just turn this on for all (e)glibc builds. If
we build with SSP enabled, we have to do other thing here instead to
build (e)glibc properly with ssp.

> 6) Current versions of everything: gcc=4.4.4, binutils=2.19.1, eglic=2.10
> everything else set to defaults
> 7) Didn't ask for Java or Fortran to be built
>
> Seems to me the real issues to be fixed are the make problem and maybe some
> default setting changes or documentation updates in regards to #3 and
> #5...and making sure to CLoog/ppl patch makes it into the next release.

See notes above.

> Wow...doesn't sound like very much change but it definitely affected
> everything. ÂI am going to try a build for gcc 4.5.1 and binutils 2.20.
> After that I am all set and will move on to the other parts of this
> effort/project...u-boot, kernel, root filesystem and application
> development. ÂLet me know if you all need me to attempt a build of something
> else. ÂOr if there is anything else you need me to do. ÂI will be happy to
> help. ÂPart of my learning. ÂI have enclosed a copy of my build.log if
> anyone is interested.
>
> Again, thanks to Bryan and Khem for all their help.
>
> Regards,
> Chris
>

Let us know if you have any more problems!

-Bryan

--
For unsubscribe information see http://sourceware.org/lists.html#faq