This is the mail archive of the crossgcc@sourceware.org mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more information.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Other format: | [Raw text] |
On Thu, Jan 13, 2011 at 11:20 AM, Kerios, Chris (KSC-ASRC-466)[ASRC AEROSPACE CORP] <chris.kerios@nasa.gov> wrote: > Hello, > I am new to crosstool-ng so please forgive me if my question is redundant or stupid. I have been through the mail list archive and Google and can't find anything on this. I am trying to build a cross toolchain for a PPC405 embedded SBC. I have gone through and installed the software correctly and went with a config created by the following commands: > > ./configure -local > make > make install > ./ct-ng powerpc-405-linux-gnu > ./ct-ng build > > The software goes out and downloads the software and then begins/completes patching the software packages. It is blowing up on the Installing Linux headers with the following error: > > [INFO ] Extracting and patching toolchain components > [EXTRA] Extracting 'linux-2.6.27.55' > [EXTRA] Patching 'linux-2.6.27.55' > [EXTRA] Extracting 'gmp-4.3.2' > [EXTRA] Patching 'gmp-4.3.2' > [EXTRA] Extracting 'mpfr-2.4.2' > [EXTRA] Patching 'mpfr-2.4.2' > [EXTRA] Extracting 'binutils-2.19.1' > [EXTRA] Patching 'binutils-2.19.1' > [EXTRA] Extracting 'gcc-4.3.2' > [EXTRA] Patching 'gcc-4.3.2' > [EXTRA] Extracting 'glibc-2.9' > [EXTRA] Patching 'glibc-2.9' > [EXTRA] Extracting 'glibc-ports-2.9' > [EXTRA] Patching 'glibc-ports-2.9' > [EXTRA] Extracting 'dmalloc-5.5.2' > [EXTRA] Patching 'dmalloc-5.5.2' > [EXTRA] Extracting 'duma_2_5_15' > [EXTRA] Patching 'duma-2_5_15' > [EXTRA] Extracting 'gdb-6.8' > [EXTRA] Patching 'gdb-6.8' > [EXTRA] Extracting 'ncurses-5.7' > [EXTRA] Patching 'ncurses-5.7' > [EXTRA] Extracting 'expat-2.0.1' > [EXTRA] Patching 'expat-2.0.1' > [INFO ] Extracting and patching toolchain components: done in 165.79s (at 08:10) > [INFO ] ================================================================= > [INFO ] Installing kernel headers > [EXTRA] Installing kernel headers > [ERROR] make[1]: *** [sub-make] Error 2 > [ERROR] Build failed in step 'Installing kernel headers' > [ERROR] Error happened in '/home/chris/Embedded/crosstool-ng-1.9.2/scripts/functions' in function 'CT_DoExecLog' (line unknown, sorry) > [ERROR] called from '/home/chris/Embedded/crosstool-ng-1.9.2/scripts/build/kernel/linux.sh' at line # 98 in function 'do_kernel_install' > [ERROR] called from '/home/chris/Embedded/crosstool-ng-1.9.2/scripts/build/kernel/linux.sh' at line # 75 in function 'do_kernel_headers' > [ERROR] called from '/home/chris/Embedded/crosstool-ng-1.9.2/scripts/crosstool-NG.sh' at line # 597 in function 'main' > [ERROR] Look at '/home/chris/x-tools/powerpc-405-linux-gnu/build.log' for more info on this error. > [ERROR] (elapsed: 8:10.67) > [08:12] / make: *** [build] Error 2 > > Is there something about PowerPC I am not aware of? Seems pretty early in the build to blow up on standard setup/config for GNU builds. Any help would be appreciated. If you could post '/home/chris/x-tools/powerpc-405-linux-gnu/build.log' and your config to http://pastebin.com/ , it would better help us help you ;) > Thanks, > Chris > > > -- > For unsubscribe information see http://sourceware.org/lists.html#faq > > -Bryan -- For unsubscribe information see http://sourceware.org/lists.html#faq
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |