RE: "powerpc-elf-ar : not found" and "libgcc2.a" problem (target 'mak e all' or 'make all-gcc')

["Bertin, Philippe" <philippe dot bertin at barco dot com>]

Hello,

Yes, indeed, thanks, NGC. This helps it somewhat further. Keeps on being
stuck somewhat further now, though : now doesn't find stdio.h in libiberty
subdir  :(

Could this have something to do with the patch I already had to implement
(also didn't find stdio.h in 2 files before, necessitating that - documented
- patch !). What's exactly is libiberty doing ? Is it a necessary part of
the cross-compiler ? If not, I could safely add the same patch, making
stdio.h not to be taken into account by the preprocessor (adding some extra
similar preprocessor- defines as before, but now into the files
'choose-temp.c' and 'cplus-dem.c'?). If I do, I continue to run into
consequent problems... Anyone any (further) clue ?

Thanks again,

Regards,

Philippe Bertin.

> -----Original Message-----
> From:	Goran Chutura [SMTP:ngcutura@yahoo.com]
> Sent:	maandag 19 november 2001 18:56
> To:	Bertin, Philippe; crossgcc@sources.redhat.com
> Subject:	Re: "powerpc-elf-ar : not found" and "libgcc2.a" problem
> (target 'mak e all' or 'make all-gcc')
> 
> Hi,
> 
> I had something similar building m68k-coff. Try
> putting $prefix/bin at the end of your PATH variable.
> 
> $prompt> PATH=$PATH:$prefix/bin ; export PATH
> 
> Regards,
> NGC
> --- "Bertin, Philippe" <philippe.bertin@barco.com>
> wrote:
> > Hello,
> > 
> > I'm making a cross-compiler on Solaris 2.6 for
> > target PowerPC. I made my
> > configuration file with
> > ./configure --target=powerpc-elf
> > --prefix=/data/users/phbe/cross/executable
> > 
> > My binutils (2.11) installed properly. For gcc
> > (version 2.95.2), I've had to
> > add a patch because an include file wasn't found.
> > After applying that patch,
> > I encounter another problem (which is unrelated to
> > the first one, I think, I
> > hope). After struggling for a day now, I'd like to
> > know if anyone has a
> > further clue on what could be wrong here. First (see
> > error output), he gives
> > a lot of warnings that he doesn't find
> > "powerpc-elf-ar", and then, further
> > on, make dies on the mv tmplibgcc2.a (see error
> > output) ... An excerpt of
> > the last stdout- output lines before make dies
> > follows right here after.
> > 
> > Thanks to whomever could give me a clue ...
> > 
> > Regards,
> > 
> > Philippe Bertin
> > Development Engineer Software Avionics
> > BarcoView.
> > 
> > 
> > stdout output :
> > ---------------
> > 
> > make[4]: Leaving directory
> > `/data/users/phbe/cross/gcc-2.95.2/gcc'
> > make[4]: Entering directory
> > `/data/users/phbe/cross/gcc-2.95.2/gcc'
> > /data/users/phbe/cross/gcc-2.95.2/gcc/xgcc
> > -B/data/users/phbe/cross/gcc-2.95.2/gcc/
> > -B/data/users/phbe/cross/executable/powerpc-elf/bin/
> >
> -I/data/users/phbe/cross/executable/powerpc-elf/include
> > -O2  -DCROSS_COMPILE
> > -DIN_GCC -DHAIFA  -DSVR4  -g -O2 -I./include   -g1 
> > -DIN_LIBGCC2
> > -D__GCC_FLOAT_NOT_NEEDED    -mstrict-align -g -O2
> > -I. -I. -I./config
> > -I./../include \
> >   -c ./cp/new2.cc -DL_op_vdelnt -o opvdelnt.o
> > make[4]: Leaving directory
> > `/data/users/phbe/cross/gcc-2.95.2/gcc'
> > make[4]: Entering directory
> > `/data/users/phbe/cross/gcc-2.95.2/gcc'
> > /data/users/phbe/cross/gcc-2.95.2/gcc/xgcc
> > -B/data/users/phbe/cross/gcc-2.95.2/gcc/
> > -B/data/users/phbe/cross/executable/powerpc-elf/bin/
> >
> -I/data/users/phbe/cross/executable/powerpc-elf/include
> > -O2  -DCROSS_COMPILE
> > -DIN_GCC -DHAIFA  -DSVR4  -g -O2 -I./include   -g1 
> > -DIN_LIBGCC2
> > -D__GCC_FLOAT_NOT_NEEDED    -mstrict-align -g -O2
> > -I. -I. -I./config
> > -I./../include \
> >   -c -fexceptions ./cp/exception.cc
> > make[4]: Leaving directory
> > `/data/users/phbe/cross/gcc-2.95.2/gcc'
> > mv tmplibgcc2.a libgcc2.a
> > make[3]: Leaving directory
> > `/data/users/phbe/cross/gcc-2.95.2/gcc'
> > make[2]: Leaving directory
> > `/data/users/phbe/cross/gcc-2.95.2/gcc'
> > make[1]: Leaving directory
> > `/data/users/phbe/cross/gcc-2.95.2/gcc'
> > 
> > 
> > error output :
> > --------------
> > /bin/sh: powerpc-elf-ar: not found
> > /bin/sh: powerpc-elf-ar: not found
> > mv: tmplibgcc2.a: No such file or directory
> > make[3]: *** [libgcc2.a] Error 1
> > make[2]: *** [stmp-multilib-sub] Error 2
> > make[1]: *** [stmp-multilib] Error 1
> > make: *** [all-gcc] Error 2
> > 
> > 
> > 
> > ------
> > Want more information?  See the CrossGCC FAQ,
> > http://www.objsw.com/CrossGCC/
> > Want to unsubscribe? Send a note to
> > crossgcc-unsubscribe@sourceware.cygnus.com
> > 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Find the one for you at Yahoo! Personals
> http://personals.yahoo.com

------
Want more information?  See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/
Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com