This is the mail archive of the crossgcc@sourceware.cygnus.com mailing list for the crossgcc project.
See the CrossGCC FAQ for lots more infromation.
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |
Hi, I am using an embedded system with a 68376. The system has an eeprom from the memory location 0x000000 and ram from the location 0x100000. For the development of a programm, I use linker-script that puts all the code in the ram. Then I can use the gdb for the bdm interface to run an debug the programm. But at the end I want to put the code in the eeprom. So I use a linker-script, that put the code in the rom. The problem is, how can I program the eeprom over the gdb. Any ideas? Thanks Kai ------------------------------------------------------- Dipl.-Phys. Kai Schaeffer Schaeffer Apparatebau KG Pasewaldtstr. 7 Tel. +49-30-80902151 14169 Berlin FAX: +49-30-80902153 http://www.schaeffer-apparatebau.de ------ Want more information? See the CrossGCC FAQ, http://www.objsw.com/CrossGCC/ Want to unsubscribe? Send a note to crossgcc-unsubscribe@sourceware.cygnus.com
Index Nav: | [Date Index] [Subject Index] [Author Index] [Thread Index] | |
---|---|---|
Message Nav: | [Date Prev] [Date Next] | [Thread Prev] [Thread Next] |