[binutils-gdb] MIPS/GAS/doc: Refer to `.module' rather than `.set'

[Maciej W.Rozycki <macro at sourceware dot org>]

https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=32035f5151b6ec76af0b62d9db8774b76eddc091

commit 32035f5151b6ec76af0b62d9db8774b76eddc091
Author: Maciej W. Rozycki <macro@imgtec.com>
Date:   Mon May 15 12:47:26 2017 +0100

    MIPS/GAS/doc: Refer to `.module' rather than `.set'
    
    Complement commit 919731affbef ("Add MIPS .module directive") and update
    the GAS manual to refer to the `.module' rather than `.set' directive in
    command-line option descriptions, following an observation that unlike
    `.set' and like the respective command-line option the use of the
    `.module' directive affects the ISA and ASE flags recorded in the object
    file produced, and therefore it is `.module' rather than `.set' that
    corresponds to the respective command-line option.
    
    	gas/
    	* doc/as.texinfo (-mips16, -no-mips16): Refer to `.module
    	mips16' rather than `.set mips16'.
    	(-mmicromips, -mno-micromips): Refer to `.module micromips' and
    	`.module nomicromips' rather than `.set micromips' and `.set
    	nomicromips'.
    	(-msmartmips, -mno-smartmips): Refer to `.module smartmips'
    	rather than `.set smartmips'.
    	* doc/c-mips.texi (MIPS Options): Refer to `.module mips16',
    	`.module micromips', `.module nomicromips' and `.module
    	smartmips' rather than `.set mips16', `.set micromips', `.set
    	nomicromips' and `.set smartmips' respectively.

Diff:
---
 gas/ChangeLog       | 14 ++++++++++++++
 gas/doc/as.texinfo  | 14 +++++++-------
 gas/doc/c-mips.texi | 10 +++++-----
 3 files changed, 26 insertions(+), 12 deletions(-)

diff --git a/gas/ChangeLog b/gas/ChangeLog
index 865142e..1c86bf1 100644
--- a/gas/ChangeLog
+++ b/gas/ChangeLog
@@ -1,3 +1,17 @@
+2017-05-15  Maciej W. Rozycki  <macro@imgtec.com>
+
+	* doc/as.texinfo (-mips16, -no-mips16): Refer to `.module
+	mips16' rather than `.set mips16'.
+	(-mmicromips, -mno-micromips): Refer to `.module micromips' and
+	`.module nomicromips' rather than `.set micromips' and `.set
+	nomicromips'.
+	(-msmartmips, -mno-smartmips): Refer to `.module smartmips'
+	rather than `.set smartmips'.
+	* doc/c-mips.texi (MIPS Options): Refer to `.module mips16',
+	`.module micromips', `.module nomicromips' and `.module
+	smartmips' rather than `.set mips16', `.set micromips', `.set
+	nomicromips' and `.set smartmips' respectively.
+
 2017-05-12  Maciej W. Rozycki  <macro@imgtec.com>
 	    Matthew Fortune  <matthew.fortune@imgtec.com>
 
diff --git a/gas/doc/as.texinfo b/gas/doc/as.texinfo
index a5cff3d..27d0c68 100644
--- a/gas/doc/as.texinfo
+++ b/gas/doc/as.texinfo
@@ -1452,21 +1452,21 @@ registers when supported by the ISA.  @samp{-mfpxx} implies
 @item -mips16
 @itemx -no-mips16
 Generate code for the MIPS 16 processor.  This is equivalent to putting
-@code{.set mips16} at the start of the assembly file.  @samp{-no-mips16}
+@code{.module mips16} at the start of the assembly file.  @samp{-no-mips16}
 turns off this option.
 
 @item -mmicromips
 @itemx -mno-micromips
 Generate code for the microMIPS processor.  This is equivalent to putting
-@code{.set micromips} at the start of the assembly file.  @samp{-mno-micromips}
-turns off this option.  This is equivalent to putting @code{.set nomicromips}
-at the start of the assembly file.
+@code{.module micromips} at the start of the assembly file.
+@samp{-mno-micromips} turns off this option.  This is equivalent to putting
+@code{.module nomicromips} at the start of the assembly file.
 
 @item -msmartmips
 @itemx -mno-smartmips
-Enables the SmartMIPS extension to the MIPS32 instruction set. This is
-equivalent to putting @code{.set smartmips} at the start of the assembly file.
-@samp{-mno-smartmips} turns off this option.
+Enables the SmartMIPS extension to the MIPS32 instruction set.  This is
+equivalent to putting @code{.module smartmips} at the start of the assembly
+file.  @samp{-mno-smartmips} turns off this option.
 
 @item -mips3d
 @itemx -no-mips3d
diff --git a/gas/doc/c-mips.texi b/gas/doc/c-mips.texi
index d9a09f1..e5d00b2 100644
--- a/gas/doc/c-mips.texi
+++ b/gas/doc/c-mips.texi
@@ -148,22 +148,22 @@ registers when supported by the ISA.  @samp{-mfpxx} implies
 @item -mips16
 @itemx -no-mips16
 Generate code for the MIPS 16 processor.  This is equivalent to putting
-@code{.set mips16} at the start of the assembly file.  @samp{-no-mips16}
+@code{.module mips16} at the start of the assembly file.  @samp{-no-mips16}
 turns off this option.
 
 @item -mmicromips
 @itemx -mno-micromips
 Generate code for the microMIPS processor.  This is equivalent to putting
-@code{.set micromips} at the start of the assembly file.  @samp{-mno-micromips}
-turns off this option.  This is equivalent to putting @code{.set nomicromips}
-at the start of the assembly file.
+@code{.module micromips} at the start of the assembly file.
+@samp{-mno-micromips} turns off this option.  This is equivalent to putting
+@code{.module nomicromips} at the start of the assembly file.
 
 @item -msmartmips
 @itemx -mno-smartmips
 Enables the SmartMIPS extensions to the MIPS32 instruction set, which
 provides a number of new instructions which target smartcard and
 cryptographic applications.  This is equivalent to putting
-@code{.set smartmips} at the start of the assembly file.
+@code{.module smartmips} at the start of the assembly file.
 @samp{-mno-smartmips} turns off this option.
 
 @item -mips3d