This is the mail archive of the
binutils-cvs@sourceware.org
mailing list for the binutils project.
[binutils-gdb/users/hjl/linux/master] [GCC bug #63539]: libgo does not use the newly built objcopy when doing a combined build
- From: H.J.Lu <hjl at sourceware dot org>
- To: bfd-cvs at sourceware dot org, gdb-cvs at sourceware dot org
- Date: 11 Jan 2015 16:19:03 -0000
- Subject: [binutils-gdb/users/hjl/linux/master] [GCC bug #63539]: libgo does not use the newly built objcopy when doing a combined build
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=6b91c5417cb082f701fa9fca6d67e3ffb55ff73a
commit 6b91c5417cb082f701fa9fca6d67e3ffb55ff73a
Author: Andrew Pinski <apinski@cavium.com>
Date: Sat Jan 3 14:54:45 2015 -0800
[GCC bug #63539]: libgo does not use the newly built objcopy when doing a combined build
2015-01-03 Andrew Pinski <apinski@cavium.com>
* Makefile.def (flags_to_pass): Pass OBJCOPY_FOR_TARGET also.
* Makefile.tpl (HOST_EXPORTS): Add OBJCOPY_FOR_TARGET.
(BASE_TARGET_EXPORTS): Add OBJCOPY.
(OBJCOPY_FOR_TARGET): New variable.
(EXTRA_TARGET_FLAGS): Add OBJCOPY.
* Makefile.in: Regenerate.
* configure.ac: Check for already installed target objcopy.
Also GCC_TARGET_TOOL on objcopy.
* configure: Regenerate.
Diff:
---
ChangeLog | 12 +++
Makefile.def | 1 +
Makefile.in | 5 ++
Makefile.tpl | 4 +
configure | 276 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
configure.ac | 2 +
6 files changed, 300 insertions(+)
diff --git a/ChangeLog b/ChangeLog
index 0c26e8b..6dcf4ca 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,15 @@
+2015-01-03 Andrew Pinski <apinski@cavium.com>
+
+ * Makefile.def (flags_to_pass): Pass OBJCOPY_FOR_TARGET also.
+ * Makefile.tpl (HOST_EXPORTS): Add OBJCOPY_FOR_TARGET.
+ (BASE_TARGET_EXPORTS): Add OBJCOPY.
+ (OBJCOPY_FOR_TARGET): New variable.
+ (EXTRA_TARGET_FLAGS): Add OBJCOPY.
+ * Makefile.in: Regenerate.
+ * configure.ac: Check for already installed target objcopy.
+ Also GCC_TARGET_TOOL on objcopy.
+ * configure: Regenerate.
+
2015-01-02 Hans-Peter Nilsson <hp@bitrange.com>
* config.sub: Update from upstream, to 2015-01-01 version.
diff --git a/Makefile.def b/Makefile.def
index ec2b0f2..7b739ff 100644
--- a/Makefile.def
+++ b/Makefile.def
@@ -271,6 +271,7 @@ flags_to_pass = { flag= LIBCFLAGS_FOR_TARGET ; };
flags_to_pass = { flag= LIBCXXFLAGS_FOR_TARGET ; };
flags_to_pass = { flag= NM_FOR_TARGET ; };
flags_to_pass = { flag= OBJDUMP_FOR_TARGET ; };
+flags_to_pass = { flag= OBJCOPY_FOR_TARGET ; };
flags_to_pass = { flag= RANLIB_FOR_TARGET ; };
flags_to_pass = { flag= READELF_FOR_TARGET ; };
flags_to_pass = { flag= STRIP_FOR_TARGET ; };
diff --git a/Makefile.in b/Makefile.in
index bf06dce..1472dd8 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -213,6 +213,7 @@ HOST_EXPORTS = \
LD_FOR_TARGET="$(LD_FOR_TARGET)"; export LD_FOR_TARGET; \
NM_FOR_TARGET="$(NM_FOR_TARGET)"; export NM_FOR_TARGET; \
OBJDUMP_FOR_TARGET="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP_FOR_TARGET; \
+ OBJCOPY_FOR_TARGET="$(OBJCOPY_FOR_TARGET)"; export OBJCOPY_FOR_TARGET; \
RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)"; export RANLIB_FOR_TARGET; \
READELF_FOR_TARGET="$(READELF_FOR_TARGET)"; export READELF_FOR_TARGET; \
TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
@@ -285,6 +286,7 @@ BASE_TARGET_EXPORTS = \
LIPO="$(LIPO_FOR_TARGET)"; export LIPO; \
NM="$(COMPILER_NM_FOR_TARGET)"; export NM; \
OBJDUMP="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP; \
+ OBJCOPY="$(OBJCOPY_FOR_TARGET)"; export OBJCOPY; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
READELF="$(READELF_FOR_TARGET)"; export READELF; \
STRIP="$(STRIP_FOR_TARGET)"; export STRIP; \
@@ -536,6 +538,7 @@ LD_FOR_TARGET=@LD_FOR_TARGET@
LIPO_FOR_TARGET=@LIPO_FOR_TARGET@
NM_FOR_TARGET=@NM_FOR_TARGET@
OBJDUMP_FOR_TARGET=@OBJDUMP_FOR_TARGET@
+OBJCOPY_FOR_TARGET=@OBJCOPY_FOR_TARGET@
RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
READELF_FOR_TARGET=@READELF_FOR_TARGET@
STRIP_FOR_TARGET=@STRIP_FOR_TARGET@
@@ -755,6 +758,7 @@ BASE_FLAGS_TO_PASS = \
"LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
"OBJDUMP_FOR_TARGET=$(OBJDUMP_FOR_TARGET)" \
+ "OBJCOPY_FOR_TARGET=$(OBJCOPY_FOR_TARGET)" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
"READELF_FOR_TARGET=$(READELF_FOR_TARGET)" \
"STRIP_FOR_TARGET=$(STRIP_FOR_TARGET)" \
@@ -851,6 +855,7 @@ EXTRA_TARGET_FLAGS = \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$(COMPILER_NM_FOR_TARGET)' \
'OBJDUMP=$$(OBJDUMP_FOR_TARGET)' \
+ 'OBJCOPY=$$(OBJCOPY_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'READELF=$$(READELF_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)' \
diff --git a/Makefile.tpl b/Makefile.tpl
index 54a8dc3..f9bbbde 100644
--- a/Makefile.tpl
+++ b/Makefile.tpl
@@ -216,6 +216,7 @@ HOST_EXPORTS = \
LD_FOR_TARGET="$(LD_FOR_TARGET)"; export LD_FOR_TARGET; \
NM_FOR_TARGET="$(NM_FOR_TARGET)"; export NM_FOR_TARGET; \
OBJDUMP_FOR_TARGET="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP_FOR_TARGET; \
+ OBJCOPY_FOR_TARGET="$(OBJCOPY_FOR_TARGET)"; export OBJCOPY_FOR_TARGET; \
RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)"; export RANLIB_FOR_TARGET; \
READELF_FOR_TARGET="$(READELF_FOR_TARGET)"; export READELF_FOR_TARGET; \
TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
@@ -288,6 +289,7 @@ BASE_TARGET_EXPORTS = \
LIPO="$(LIPO_FOR_TARGET)"; export LIPO; \
NM="$(COMPILER_NM_FOR_TARGET)"; export NM; \
OBJDUMP="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP; \
+ OBJCOPY="$(OBJCOPY_FOR_TARGET)"; export OBJCOPY; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
READELF="$(READELF_FOR_TARGET)"; export READELF; \
STRIP="$(STRIP_FOR_TARGET)"; export STRIP; \
@@ -489,6 +491,7 @@ LD_FOR_TARGET=@LD_FOR_TARGET@
LIPO_FOR_TARGET=@LIPO_FOR_TARGET@
NM_FOR_TARGET=@NM_FOR_TARGET@
OBJDUMP_FOR_TARGET=@OBJDUMP_FOR_TARGET@
+OBJCOPY_FOR_TARGET=@OBJCOPY_FOR_TARGET@
RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
READELF_FOR_TARGET=@READELF_FOR_TARGET@
STRIP_FOR_TARGET=@STRIP_FOR_TARGET@
@@ -656,6 +659,7 @@ EXTRA_TARGET_FLAGS = \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$(COMPILER_NM_FOR_TARGET)' \
'OBJDUMP=$$(OBJDUMP_FOR_TARGET)' \
+ 'OBJCOPY=$$(OBJCOPY_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'READELF=$$(READELF_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)' \
diff --git a/configure b/configure
index 87677bc..64d287d 100755
--- a/configure
+++ b/configure
@@ -574,6 +574,7 @@ STRIP_FOR_TARGET
READELF_FOR_TARGET
RANLIB_FOR_TARGET
OBJDUMP_FOR_TARGET
+OBJCOPY_FOR_TARGET
NM_FOR_TARGET
LIPO_FOR_TARGET
LD_FOR_TARGET
@@ -830,6 +831,7 @@ DLLTOOL_FOR_TARGET
LD_FOR_TARGET
LIPO_FOR_TARGET
NM_FOR_TARGET
+OBJCOPY_FOR_TARGET
OBJDUMP_FOR_TARGET
RANLIB_FOR_TARGET
READELF_FOR_TARGET
@@ -1603,6 +1605,8 @@ Some influential environment variables:
LIPO for the target
NM_FOR_TARGET
NM for the target
+ OBJCOPY_FOR_TARGET
+ OBJCOPY for the target
OBJDUMP_FOR_TARGET
OBJDUMP for the target
RANLIB_FOR_TARGET
@@ -12361,6 +12365,236 @@ fi
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" ; then
+ if test -n "$with_build_time_tools"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for objcopy in $with_build_time_tools" >&5
+$as_echo_n "checking for objcopy in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/objcopy; then
+ OBJCOPY_FOR_TARGET=`cd $with_build_time_tools && pwd`/objcopy
+ ac_cv_path_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_OBJCOPY_FOR_TARGET" >&5
+$as_echo "$ac_cv_path_OBJCOPY_FOR_TARGET" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ elif test $build != $host && test $have_gcc_for_target = yes; then
+ OBJCOPY_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=objcopy`
+ test $OBJCOPY_FOR_TARGET = objcopy && OBJCOPY_FOR_TARGET=
+ test -n "$OBJCOPY_FOR_TARGET" && ac_cv_path_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+ fi
+fi
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
+ # Extract the first word of "objcopy", so it can be a program name with args.
+set dummy objcopy; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $OBJCOPY_FOR_TARGET in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $gcc_cv_tool_dirs
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_OBJCOPY_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_path_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_OBJCOPY_FOR_TARGET" ; then
+
+
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET=$OBJCOPY_FOR_TARGET
+elif test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+fi
+
+if test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ for ncn_progname in objcopy; do
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" && test -n "$with_build_time_tools"; then
+ for ncn_progname in objcopy; do
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
+$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
+ if test -x $with_build_time_tools/${ncn_progname}; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET=$with_build_time_tools/${ncn_progname}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ break
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET"; then
+ for ncn_progname in objcopy; do
+ if test -n "$ncn_target_tool_prefix"; then
+ # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" && test $build = $target ; then
+ # Extract the first word of "${ncn_progname}", so it can be a program name with args.
+set dummy ${ncn_progname}; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJCOPY_FOR_TARGET+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJCOPY_FOR_TARGET"; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="$OBJCOPY_FOR_TARGET" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJCOPY_FOR_TARGET="${ncn_progname}"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJCOPY_FOR_TARGET=$ac_cv_prog_OBJCOPY_FOR_TARGET
+if test -n "$OBJCOPY_FOR_TARGET"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJCOPY_FOR_TARGET" >&5
+$as_echo "$OBJCOPY_FOR_TARGET" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+ test -n "$ac_cv_prog_OBJCOPY_FOR_TARGET" && break
+ done
+fi
+
+if test -z "$ac_cv_prog_OBJCOPY_FOR_TARGET" ; then
+ set dummy objcopy
+ if test $build = $target ; then
+ OBJCOPY_FOR_TARGET="$2"
+ else
+ OBJCOPY_FOR_TARGET="${ncn_target_tool_prefix}$2"
+ fi
+else
+ OBJCOPY_FOR_TARGET="$ac_cv_prog_OBJCOPY_FOR_TARGET"
+fi
+
+else
+ OBJCOPY_FOR_TARGET=$ac_cv_path_OBJCOPY_FOR_TARGET
+fi
+
+
+
+
if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdump in $with_build_time_tools" >&5
@@ -14291,6 +14525,48 @@ $as_echo "pre-installed" >&6; }
fi
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target objcopy" >&5
+$as_echo_n "checking where to find the target objcopy... " >&6; }
+if test "x${build}" != "x${host}" ; then
+ if expr "x$OBJCOPY_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $OBJCOPY_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ else
+ # Canadian cross, just use what we found
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+else
+ ok=yes
+ case " ${configdirs} " in
+ *" binutils "*) ;;
+ *) ok=no ;;
+ esac
+
+ if test $ok = yes; then
+ # An in-tree tool is available and we can use it
+ OBJCOPY_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objcopy'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
+$as_echo "just compiled" >&6; }
+ elif expr "x$OBJCOPY_FOR_TARGET" : "x/" > /dev/null; then
+ # We already found the complete path
+ ac_dir=`dirname $OBJCOPY_FOR_TARGET`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
+$as_echo "pre-installed in $ac_dir" >&6; }
+ elif test "x$target" = "x$host"; then
+ # We can use an host tool
+ OBJCOPY_FOR_TARGET='$(OBJDUMP)'
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
+$as_echo "host tool" >&6; }
+ else
+ # We need a cross tool
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
+$as_echo "pre-installed" >&6; }
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target objdump" >&5
$as_echo_n "checking where to find the target objdump... " >&6; }
if test "x${build}" != "x${host}" ; then
diff --git a/configure.ac b/configure.ac
index 4bb4865..5badc7f 100644
--- a/configure.ac
+++ b/configure.ac
@@ -3232,6 +3232,7 @@ ACX_CHECK_INSTALLED_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool)
ACX_CHECK_INSTALLED_TARGET_TOOL(LD_FOR_TARGET, ld)
ACX_CHECK_INSTALLED_TARGET_TOOL(LIPO_FOR_TARGET, lipo)
ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm)
+ACX_CHECK_INSTALLED_TARGET_TOOL(OBJCOPY_FOR_TARGET, objcopy)
ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump)
ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib)
ACX_CHECK_INSTALLED_TARGET_TOOL(READELF_FOR_TARGET, readelf)
@@ -3262,6 +3263,7 @@ GCC_TARGET_TOOL(gccgo, GOC_FOR_TARGET, GOC,
GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new])
GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
+GCC_TARGET_TOOL(objcopy, OBJCOPY_FOR_TARGET, OBJDUMP, [binutils/objcopy])
GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
GCC_TARGET_TOOL(readelf, READELF_FOR_TARGET, READELF, [binutils/readelf])