This is the mail archive of the newlib@sourceware.org mailing list for the newlib project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Reconfiguring newlib-1.16.0 for AVR32


I am trying to build newlib-1.16.0 for the AVR32 based on the Atmel patches.
(They do not supply patches for anything later)

These patches will update source, but not the Makefile.in and configure scripts
so the build will fail, and I do not have their build scripts.


I installed
* automake-1.9.6
* autoconf-2.64
* libtool-2.2.8

I have run
aclocal
autoconf
automake

in the newlib directory and some subdirectories updating:

 newlib/Makefile.in
 newlib/aclocal.m4
 newlib/configure
 newlib/libc/aclocal.m4                   |    6 +-
 newlib/libc/argz/Makefile.in             |    1 +
 newlib/libc/ctype/Makefile.in            |    1 +
 newlib/libc/errno/Makefile.in            |    1 +
 newlib/libc/iconv/Makefile.in            |    1 +
 newlib/libc/iconv/ccs/Makefile.in        |    1 +
 newlib/libc/iconv/ccs/binary/Makefile.in |    1 +
 newlib/libc/iconv/ces/Makefile.in        |    1 +
 newlib/libc/iconv/lib/Makefile.in        |    1 +
 newlib/libc/locale/Makefile.in           |    1 +
 newlib/libc/machine/Makefile.in          |   15 +-
 newlib/libc/machine/avr32/Makefile.in    |  405 ++
 newlib/libc/machine/avr32/aclocal.m4     |  880 +++
 newlib/libc/machine/avr32/configure      | 4620 ++++++++++++++
 newlib/libc/misc/Makefile.in             |    1 +
 newlib/libc/posix/Makefile.in            |    1 +
 newlib/libc/reent/Makefile.in            |    1 +
 newlib/libc/search/Makefile.in           |    1 +
 newlib/libc/signal/Makefile.in           |    1 +
 newlib/libc/stdio/Makefile.in            |    1 +
 newlib/libc/stdio64/Makefile.in          |    1 +
 newlib/libc/stdlib/Makefile.in           |    1 +
 newlib/libm/Makefile.in                  |    1 +
 newlib/libm/common/Makefile.in           |    1 +
 newlib/libm/configure                    | 6809 +++++++++-------------
 newlib/libm/math/Makefile.in             |    1 +
 newlib/libm/mathfp/Makefile.in           |    1 +
 newlib/libc/sys/configure
 newlib/libc/sys/avr32/Makefile.in
 newlib/libc/sys/avr32/aclocal.m4
 newlib/libc/sys/avr32/configure

When I run automake in newlib/libc I get:

configure.in: no proper invocation of AM_INIT_AUTOMAKE was found.
configure.in: You should verify that configure.in invokes AM_INIT_AUTOMAKE,
configure.in: that aclocal.m4 is present in the top-level directory,
configure.in: and that aclocal.m4 was recently regenerated (using aclocal).
argz/Makefile.am:8: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
argz/Makefile.am:35: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
ctype/Makefile.am:23: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
ctype/Makefile.am:55: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
errno/Makefile.am:11: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
iconv/ccs/Makefile.am:23: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
iconv/ces/Makefile.am:21: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
iconv/lib/Makefile.am:17: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
locale/Makefile.am:10: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
locale/Makefile.am:25: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
misc/Makefile.am:11: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
posix/Makefile.am:23: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
posix/Makefile.am:26: ELIX_LEVEL_2 does not appear in AM_CONDITIONAL
posix/Makefile.am:29: ELIX_LEVEL_3 does not appear in AM_CONDITIONAL
posix/Makefile.am:39: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
reent/Makefile.am:22: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
reent/Makefile.am:25: ELIX_LEVEL_2 does not appear in AM_CONDITIONAL
reent/Makefile.am:55: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
search/Makefile.am:16: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
search/Makefile.am:37: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
signal/Makefile.am:11: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
stdio/Makefile.am:89: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
stdio/Makefile.am:106: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
stdio/Makefile.am:109: ELIX_LEVEL_2 does not appear in AM_CONDITIONAL
stdio/Makefile.am:112: ELIX_LEVEL_3 does not appear in AM_CONDITIONAL
stdio/Makefile.am:136: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
stdio64/Makefile.am:11: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
stdio64/Makefile.am:28: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
stdlib/Makefile.am:121: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
stdlib/Makefile.am:125: ELIX_LEVEL_2 does not appear in AM_CONDITIONAL
stdlib/Makefile.am:129: ELIX_LEVEL_3 does not appear in AM_CONDITIONAL
stdlib/Makefile.am:147: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
string/Makefile.am:74: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
string/Makefile.am:92: USE_LIBTOOL does not appear in AM_CONDITIONAL
string/Makefile.am:136: unterminated conditionals: ELIX_LEVEL_1_FALSE
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
syscalls/Makefile.am:26: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
syscalls/Makefile.am:29: ELIX_LEVEL_2 does not appear in AM_CONDITIONAL
syscalls/Makefile.am:41: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
time/Makefile.am:31: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
unix/Makefile.am:25: ELIX_LEVEL_1 does not appear in AM_CONDITIONAL
unix/Makefile.am:28: ELIX_LEVEL_2 does not appear in AM_CONDITIONAL
unix/Makefile.am:31: ELIX_LEVEL_3 does not appear in AM_CONDITIONAL
unix/Makefile.am:41: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified
Makefile.am:44: USE_LIBTOOL does not appear in AM_CONDITIONAL
Makefile.am:93: USE_LIBTOOL does not appear in AM_CONDITIONAL
configure.in: `AM_MAINTAINER_MODE' required when --cygnus specified

"autoconf --with-maintainer-mode" does not work.

i tried adding AM_INIT_AUTOMAKE to "configure.ac" without success.

Any clues?

One of the AVR32 patches (copied from ARM I guess) contain:


diff -x .svn -x etc -x binary -x autom4te.cache -Narup ./newlib-1.16.0/newlib/libc/machine/avr32/configure.in ./newlib/newlib/libc/machine/avr32/configure.in
--- ./newlib/libc/machine/avr32/configure.in 1969-12-31 17:00:00.000000000 -0700
+++ ./newlib/libc/machine/avr32/configure.in 2009-01-05 17:36:50.987164700 -0700
@@ -0,0 +1,14 @@
+dnl This is the newlib/libc/machine/arm configure.in file.
+dnl Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+AC_INIT([newlib],[NEWLIB_VERSION])
+AC_CONFIG_SRCDIR([Makefile.am])
+
+dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake.
+AC_CONFIG_AUX_DIR(../../../..)
+
+NEWLIB_CONFIGURE(../../..)
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT


i am having problem with NEWLIB_CONFIGURE is not expanded.
When I edit the "configure.in" file, then "known" macros are
highlighted but NEWLIB_CONFIGURE is not.

NEWLIB_CONFIGURE is defined in "newlib/acinclude.m4"

Any advice is welcome!

Best Regards
Ulf Samuelsson


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]