RE: newlib didn't create makefiles

[Gerster Jochen-B01096 <B01096 at freescale dot com>]

Hi

I'm now back on building the gcc, but the problem is still the same. Building newlib failed.
Now I used gcc 4.11 and binutils 2.17 and newlib 1.14 without any patch or change

First I create for each module its own build folder Then I build the binutils everything works Then the gcc bootstrap And now I want to build newlib and the problem does still exist

Attacted the newlib configure output and the make output

Thanks!

Jochen Gerster


 

-----Original Message-----
From: newlib-owner@sourceware.org [mailto:newlib-owner@sourceware.org] On Behalf Of Jeff Johnston
Sent: Dienstag, 28. März 2006 22:01
To: Gerster Jochen-B01096
Cc: newlib@sources.redhat.com
Subject: Re: newlib didn't create makefiles

Jochen,

   Please post your directory setup (i.e. where is newlib, where are the rest of the tools).  I would need to see your actual configuration command and the results.  Are you configuring as "--target=powerpc-mpc55xx" or "--target=powerpc-eabispe"??  You must configure from the top-level (i.e. you don't configure inside the newlib subdirectory; the top-level src configuration does that for you when you finally issue "make all" or "make all-target-newlib").

-- Jeff J.

Gerster Jochen-B01096 wrote:
> I build the binutils and the gcc bootstrap using this manual 
> http://www.ifp.uiuc.edu/~nakazato/tips/xgcc.html
> 
> 
> -----Original Message-----
> From: newlib-owner@sourceware.org [mailto:newlib-owner@sourceware.org]
> On Behalf Of Gerster Jochen-B01096
> Sent: Freitag, 24. März 2006 11:17
> To: newlib@sources.redhat.com
> Subject: newlib didn't create makefiles
> 
> Hi,
>  
> I'm working on porting eCos to the powerpc mpc55xx family
>  
> one step is building a gcc. And that's where the trouble getting 
> started
>  
> USING:
> binutils 2.15  < patch_e200z6_binutils-2.15.diff
> gcc-3.4.3      < patch_all_e200_gcc-3.4.3.diff
> newlib 1.12.0
>  
> TARGET: powerpc mpc55xx
> HOST: i686-pc-cygwin
> BUILD: i686-pc-cygwin
>  
> Building binutils 2.15                - works
> Building gcc 3.4.3 bootstrap     - works
> now I want to build newlib and ...
>  
> make[4]: Entering directory `/src/build-newlib/powerpc-eabispe/mpc7400/newlib'
> make[4]: *** No rule to make target `all'. Stop.
> make[4]: Leaving directory `/src/build-newlib/powerpc-eabispe/mpc7400/newlib'
> make[3]: *** [multi-do] Error 1
> make[3]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib'
> make[2]: *** [all-multi] Error 2
> make[2]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib'
> make[1]: *** [all-recursive-am] Error 2
> make[1]: Leaving directory `/src/build-newlib/powerpc-eabispe/newlib'
> make: *** [all-target-newlib] Error 2
>  
> the directory mpc7400/newlib is completely empty, no makefile, nothing
>  
> Any ideas???
>  
> I also tested newlib 1.13.0 newlib 1.14.0 -> same results
>  
> Thank you for your help!
>  
> Jochen

Attachment: newlib_out_make.txt
Description: Text document

Attachment: newlib_out_cfg.txt
Description: Text document