This is the mail archive of the
lvm2-cvs@sourceware.org
mailing list for the LVM2 project.
LVM2/test t-vgsplit-operation.sh t-vgsplit-usa ...
- From: wysochanski at sourceware dot org
- To: lvm-devel at redhat dot com, lvm2-cvs at sourceware dot org
- Date: 4 Mar 2008 19:48:32 -0000
- Subject: LVM2/test t-vgsplit-operation.sh t-vgsplit-usa ...
CVSROOT: /cvs/lvm2
Module name: LVM2
Changes by: wysochanski@sourceware.org 2008-03-04 19:48:32
Modified files:
test : t-vgsplit-operation.sh
Added files:
test : t-vgsplit-usage.sh
Log message:
Update vgsplit tests.
- Divide into 'usage' and 'operation' tests.
- Add operation tests for specific LV types.
Patches:
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/test/t-vgsplit-usage.sh.diff?cvsroot=lvm2&r1=NONE&r2=1.1
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/test/t-vgsplit-operation.sh.diff?cvsroot=lvm2&r1=1.10&r2=1.11
/cvs/lvm2/LVM2/test/t-vgsplit-usage.sh,v --> standard output
revision 1.1
--- LVM2/test/t-vgsplit-usage.sh
+++ - 2008-03-04 19:48:32.575367000 +0000
@@ -0,0 +1,182 @@
+#!/bin/sh
+# Copyright (C) 2007 Red Hat, Inc. All rights reserved.
+#
+# This copyrighted material is made available to anyone wishing to use,
+# modify, copy, or redistribute it subject to the terms and conditions
+# of the GNU General Public License v.2.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+test_description='Test vgsplit command options for validity'
+privileges_required_=1
+
+. ./test-lib.sh
+
+cleanup_()
+{
+ test -n "$d1" && losetup -d "$d1"
+ test -n "$d2" && losetup -d "$d2"
+ test -n "$d3" && losetup -d "$d3"
+ test -n "$d4" && losetup -d "$d4"
+ rm -f "$f1" "$f2" "$f3" "$f4"
+}
+
+# FIXME: paramaterize lvm1 vs lvm2 metadata; most of these tests should run
+# fine with lvm1 metadata as well; for now, just add disks 5 and 6 as lvm1
+# metadata
+test_expect_success \
+ 'set up temp files, loopback devices, PVs, vgnames' \
+ 'f1=$(pwd)/1 && d1=$(loop_setup_ "$f1") &&
+ f2=$(pwd)/2 && d2=$(loop_setup_ "$f2") &&
+ f3=$(pwd)/3 && d3=$(loop_setup_ "$f3") &&
+ f4=$(pwd)/4 && d4=$(loop_setup_ "$f4") &&
+ vg1=$(this_test_)-test-vg1-$$ &&
+ vg2=$(this_test_)-test-vg2-$$ &&
+ lv1=$(this_test_)-test-lv1-$$ &&
+ lv2=$(this_test_)-test-lv2-$$ &&
+ lv3=$(this_test_)-test-lv3-$$ &&
+ pvcreate $d1 $d2 $d3 $d4'
+
+test_expect_success \
+ 'vgsplit accepts new vg as destination of split' \
+ 'vgcreate $vg1 $d1 $d2 &&
+ vgsplit $vg1 $vg2 $d1 1>err;
+ status=$?; echo status=$?; test $status = 0 &&
+ grep "New volume group \"$vg2\" successfully split from \"$vg1\"" err &&
+ vgremove $vg1 &&
+ vgremove $vg2'
+
+test_expect_success \
+ 'vgsplit accepts existing vg as destination of split' \
+ 'vgcreate $vg1 $d1 $d2 &&
+ vgcreate $vg2 $d3 $d4 &&
+ vgsplit $vg1 $vg2 $d1 1>err;
+ status=$?; echo status=$?; test $status = 0 &&
+ grep "Existing volume group \"$vg2\" successfully split from \"$vg1\"" err &&
+ vgremove $vg1 &&
+ vgremove $vg2'
+
+test_expect_success \
+ 'vgsplit accepts --maxphysicalvolumes 128 on new VG' \
+ 'vgcreate $vg1 $d1 $d2 &&
+ vgsplit --maxphysicalvolumes 128 $vg1 $vg2 $d1 &&
+ check_vg_field_ $vg2 max_pv 128 &&
+ vgremove $vg1 &&
+ vgremove $vg2'
+
+test_expect_success \
+ 'vgsplit accepts --maxlogicalvolumes 128 on new VG' \
+ 'vgcreate $vg1 $d1 $d2 &&
+ vgsplit --maxlogicalvolumes 128 $vg1 $vg2 $d1 &&
+ check_vg_field_ $vg2 max_lv 128 &&
+ vgremove $vg1 &&
+ vgremove $vg2'
+
+test_expect_success \
+ 'vgsplit rejects split because max_pv of destination would be exceeded' \
+ 'vgcreate --maxphysicalvolumes 2 $vg1 $d1 $d2 &&
+ vgcreate --maxphysicalvolumes 2 $vg2 $d3 $d4 &&
+ vgsplit $vg1 $vg2 $d1 2>err;
+ status=$?; echo status=$?; test $status = 5 &&
+ grep "^ Maximum number of physical volumes (2) exceeded" err &&
+ vgremove $vg2 &&
+ vgremove $vg1'
+
+test_expect_success \
+ 'vgsplit rejects split because maxphysicalvolumes given with existing vg' \
+ 'vgcreate --maxphysicalvolumes 2 $vg1 $d1 $d2 &&
+ vgcreate --maxphysicalvolumes 2 $vg2 $d3 $d4 &&
+ vgsplit --maxphysicalvolumes 2 $vg1 $vg2 $d1 2>err;
+ status=$?; echo status=$?; test $status = 5 &&
+ grep "^ Volume group \"$vg2\" exists, but new VG option specified" err &&
+ vgremove $vg2 &&
+ vgremove $vg1'
+
+test_expect_success \
+ 'vgsplit rejects split because maxlogicalvolumes given with existing vg' \
+ 'vgcreate --maxlogicalvolumes 2 $vg1 $d1 $d2 &&
+ vgcreate --maxlogicalvolumes 2 $vg2 $d3 $d4 &&
+ vgsplit --maxlogicalvolumes 2 $vg1 $vg2 $d1 2>err;
+ status=$?; echo status=$?; test $status = 5 &&
+ grep "^ Volume group \"$vg2\" exists, but new VG option specified" err &&
+ vgremove $vg2 &&
+ vgremove $vg1'
+
+test_expect_success \
+ 'vgsplit rejects split because alloc given with existing vg' \
+ 'vgcreate --alloc cling $vg1 $d1 $d2 &&
+ vgcreate --alloc cling $vg2 $d3 $d4 &&
+ vgsplit --alloc cling $vg1 $vg2 $d1 2>err;
+ status=$?; echo status=$?; test $status = 5 &&
+ grep "^ Volume group \"$vg2\" exists, but new VG option specified" err &&
+ vgremove $vg2 &&
+ vgremove $vg1'
+
+test_expect_success \
+ 'vgsplit rejects split because clustered given with existing vg' \
+ 'vgcreate --clustered n $vg1 $d1 $d2 &&
+ vgcreate --clustered n $vg2 $d3 $d4 &&
+ vgsplit --clustered n $vg1 $vg2 $d1 2>err;
+ status=$?; echo status=$?; test $status = 5 &&
+ grep "^ Volume group \"$vg2\" exists, but new VG option specified" err &&
+ vgremove $vg2 &&
+ vgremove $vg1'
+
+test_expect_success \
+ 'vgsplit rejects split because metadata types differ' \
+ 'pvcreate -ff -M1 $d3 $d4 &&
+ pvcreate -ff -M2 $d1 $d2 &&
+ vgcreate -M1 $vg1 $d3 $d4 &&
+ vgcreate -M2 $vg2 $d1 $d2 &&
+ vgsplit $vg1 $vg2 $d3 2>err;
+ status=$?; echo status=$?; test $status = 5 &&
+ grep "^ Metadata types differ" err &&
+ vgremove $vg2 &&
+ vgremove $vg1'
+
+test_expect_success \
+ 'vgsplit rejects vg with active lv' \
+ 'pvcreate -ff -M2 $d3 $d4 &&
+ vgcreate $vg1 $d1 $d2 &&
+ vgcreate $vg2 $d3 $d4 &&
+ lvcreate -l 4 -n $lv1 $vg1 &&
+ vgsplit $vg1 $vg2 $d1 2>err;
+ status=$?; echo status=$?; test $status = 5 &&
+ grep "^ Logical volumes in \"$vg1\" must be inactive\$" err &&
+ vgremove -f $vg2 &&
+ vgremove -f $vg1'
+
+test_expect_success \
+ 'vgsplit rejects split because max_lv is exceeded' \
+ 'vgcreate --maxlogicalvolumes 2 $vg1 $d1 $d2 &&
+ vgcreate --maxlogicalvolumes 2 $vg2 $d3 $d4 &&
+ lvcreate -l 4 -n $lv1 $vg1 &&
+ lvcreate -l 4 -n $lv2 $vg1 &&
+ lvcreate -l 4 -n $lv3 $vg2 &&
+ vgchange -an $vg1 &&
+ vgchange -an $vg2 &&
+ vgsplit $vg1 $vg2 $d1 2>err;
+ status=$?; echo status=$?; test $status = 5 &&
+ grep "^ Maximum number of logical volumes (2) exceeded" err &&
+ vgremove -f $vg2 &&
+ vgremove -f $vg1'
+
+test_expect_success \
+ 'vgsplit rejects split because PV not in VG' \
+ 'vgcreate $vg1 $d1 $d2 &&
+ vgcreate $vg2 $d3 $d4 &&
+ lvcreate -l 4 -n $lv1 $vg1 &&
+ lvcreate -l 4 -n $lv2 $vg1 &&
+ vgchange -an $vg1 &&
+ vgsplit $vg1 $vg2 $d3 2>err;
+ status=$?; echo status=$?; test $status = 5 &&
+ grep "^ Physical volume $d3 not in volume group $vg1" err &&
+ vgremove -f $vg2 &&
+ vgremove -f $vg1'
+
+test_done
+# Local Variables:
+# indent-tabs-mode: nil
+# End:
--- LVM2/test/t-vgsplit-operation.sh 2008/02/29 00:09:21 1.10
+++ LVM2/test/t-vgsplit-operation.sh 2008/03/04 19:48:32 1.11
@@ -9,7 +9,7 @@
# along with this program; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-test_description='Exercise some vgsplit diagnostics'
+test_description='Test vgsplit operation, including different LV types'
privileges_required_=1
. ./test-lib.sh
@@ -40,141 +40,47 @@
pvcreate $d1 $d2 $d3 $d4'
test_expect_success \
- 'vgsplit accepts new vg as destination of split' \
- 'vgcreate $vg1 $d1 $d2 &&
- vgsplit $vg1 $vg2 $d1 1>err;
- status=$?; echo status=$?; test $status = 0 &&
- grep "New volume group \"$vg2\" successfully split from \"$vg1\"" err &&
- vgremove $vg1 &&
- vgremove $vg2'
-
-test_expect_success \
- 'vgsplit accepts existing vg as destination of split' \
+ 'vgsplit correctly splits single linear LV into existing VG' \
'vgcreate $vg1 $d1 $d2 &&
vgcreate $vg2 $d3 $d4 &&
- vgsplit $vg1 $vg2 $d1 1>err;
- status=$?; echo status=$?; test $status = 0 &&
- grep "Existing volume group \"$vg2\" successfully split from \"$vg1\"" err &&
- vgremove $vg1 &&
- vgremove $vg2'
+ lvcreate -l 4 -n $lv1 $vg1 $d1 &&
+ vgchange -an $vg1 &&
+ vgsplit $vg1 $vg2 $d1 &&
+ lvremove -f $vg2/$lv1 &&
+ vgremove -f $vg2 &&
+ vgremove -f $vg1'
test_expect_success \
- 'vgsplit accepts --maxphysicalvolumes 128 on new VG' \
+ 'vgsplit correctly splits single striped LV into existing VG' \
'vgcreate $vg1 $d1 $d2 &&
- vgsplit --maxphysicalvolumes 128 $vg1 $vg2 $d1 &&
- check_vg_field_ $vg2 max_pv 128 &&
- vgremove $vg1 &&
- vgremove $vg2'
+ vgcreate $vg2 $d3 $d4 &&
+ lvcreate -l 4 -i 2 -n $lv1 $vg1 $d1 $d2 &&
+ vgchange -an $vg1 &&
+ vgsplit $vg1 $vg2 $d1 $d2 &&
+ lvremove -f $vg2/$lv1 &&
+ vgremove -f $vg2'
test_expect_success \
- 'vgsplit accepts --maxlogicalvolumes 128 on new VG' \
+ 'vgsplit correctly splits origin and snapshot LV into existing VG' \
'vgcreate $vg1 $d1 $d2 &&
- vgsplit --maxlogicalvolumes 128 $vg1 $vg2 $d1 &&
- check_vg_field_ $vg2 max_lv 128 &&
- vgremove $vg1 &&
- vgremove $vg2'
-
-test_expect_success \
- 'vgsplit rejects split because max_pv of destination would be exceeded' \
- 'vgcreate --maxphysicalvolumes 2 $vg1 $d1 $d2 &&
- vgcreate --maxphysicalvolumes 2 $vg2 $d3 $d4 &&
- vgsplit $vg1 $vg2 $d1 2>err;
- status=$?; echo status=$?; test $status = 5 &&
- grep "^ Maximum number of physical volumes (2) exceeded" err &&
- vgremove $vg2 &&
- vgremove $vg1'
-
-test_expect_success \
- 'vgsplit rejects split because maxphysicalvolumes given with existing vg' \
- 'vgcreate --maxphysicalvolumes 2 $vg1 $d1 $d2 &&
- vgcreate --maxphysicalvolumes 2 $vg2 $d3 $d4 &&
- vgsplit --maxphysicalvolumes 2 $vg1 $vg2 $d1 2>err;
- status=$?; echo status=$?; test $status = 5 &&
- grep "^ Volume group \"$vg2\" exists, but new VG option specified" err &&
- vgremove $vg2 &&
- vgremove $vg1'
-
-test_expect_success \
- 'vgsplit rejects split because maxlogicalvolumes given with existing vg' \
- 'vgcreate --maxlogicalvolumes 2 $vg1 $d1 $d2 &&
- vgcreate --maxlogicalvolumes 2 $vg2 $d3 $d4 &&
- vgsplit --maxlogicalvolumes 2 $vg1 $vg2 $d1 2>err;
- status=$?; echo status=$?; test $status = 5 &&
- grep "^ Volume group \"$vg2\" exists, but new VG option specified" err &&
- vgremove $vg2 &&
- vgremove $vg1'
-
-test_expect_success \
- 'vgsplit rejects split because alloc given with existing vg' \
- 'vgcreate --alloc cling $vg1 $d1 $d2 &&
- vgcreate --alloc cling $vg2 $d3 $d4 &&
- vgsplit --alloc cling $vg1 $vg2 $d1 2>err;
- status=$?; echo status=$?; test $status = 5 &&
- grep "^ Volume group \"$vg2\" exists, but new VG option specified" err &&
- vgremove $vg2 &&
- vgremove $vg1'
-
-test_expect_success \
- 'vgsplit rejects split because clustered given with existing vg' \
- 'vgcreate --clustered n $vg1 $d1 $d2 &&
- vgcreate --clustered n $vg2 $d3 $d4 &&
- vgsplit --clustered n $vg1 $vg2 $d1 2>err;
- status=$?; echo status=$?; test $status = 5 &&
- grep "^ Volume group \"$vg2\" exists, but new VG option specified" err &&
- vgremove $vg2 &&
- vgremove $vg1'
-
-test_expect_success \
- 'vgsplit rejects split because metadata types differ' \
- 'pvcreate -ff -M1 $d3 $d4 &&
- pvcreate -ff -M2 $d1 $d2 &&
- vgcreate -M1 $vg1 $d3 $d4 &&
- vgcreate -M2 $vg2 $d1 $d2 &&
- vgsplit $vg1 $vg2 $d3 2>err;
- status=$?; echo status=$?; test $status = 5 &&
- grep "^ Metadata types differ" err &&
- vgremove $vg2 &&
- vgremove $vg1'
-
-test_expect_success \
- 'vgsplit rejects vg with active lv' \
- 'pvcreate -ff -M2 $d3 $d4 &&
- vgcreate $vg1 $d1 $d2 &&
vgcreate $vg2 $d3 $d4 &&
- lvcreate -l 4 -n $lv1 $vg1 &&
- vgsplit $vg1 $vg2 $d1 2>err;
- status=$?; echo status=$?; test $status = 5 &&
- grep "^ Logical volumes in \"$vg1\" must be inactive\$" err &&
- vgremove -f $vg2 &&
- vgremove -f $vg1'
-
-test_expect_success \
- 'vgsplit rejects split because max_lv is exceeded' \
- 'vgcreate --maxlogicalvolumes 2 $vg1 $d1 $d2 &&
- vgcreate --maxlogicalvolumes 2 $vg2 $d3 $d4 &&
- lvcreate -l 4 -n $lv1 $vg1 &&
- lvcreate -l 4 -n $lv2 $vg1 &&
- lvcreate -l 4 -n $lv3 $vg2 &&
+ lvcreate -l 64 -i 2 -n $lv1 $vg1 $d1 $d2 &&
+ lvcreate -l 4 -i 2 -s -n $lv2 $vg1/$lv1 &&
vgchange -an $vg1 &&
- vgchange -an $vg2 &&
- vgsplit $vg1 $vg2 $d1 2>err;
- status=$?; echo status=$?; test $status = 5 &&
- grep "^ Maximum number of logical volumes (2) exceeded" err &&
- vgremove -f $vg2 &&
- vgremove -f $vg1'
+ vgsplit $vg1 $vg2 $d1 $d2 &&
+ lvremove -f $vg2/$lv2 &&
+ lvremove -f $vg2/$lv1 &&
+ vgremove -f $vg2'
test_expect_success \
- 'vgsplit rejects split because PV not in VG' \
- 'vgcreate $vg1 $d1 $d2 &&
- vgcreate $vg2 $d3 $d4 &&
- lvcreate -l 4 -n $lv1 $vg1 &&
- lvcreate -l 4 -n $lv2 $vg1 &&
+ 'vgsplit correctly splits mirror LV into existing VG' \
+ 'vgcreate $vg1 $d1 $d2 $d3 &&
+ vgcreate $vg2 $d4 &&
+ lvcreate -l 64 -m1 -n $lv1 $vg1 $d1 $d2 $d3 &&
vgchange -an $vg1 &&
- vgsplit $vg1 $vg2 $d3 2>err;
- status=$?; echo status=$?; test $status = 5 &&
- grep "^ Physical volume $d3 not in volume group $vg1" err &&
- vgremove -f $vg2 &&
- vgremove -f $vg1'
+ vgsplit $vg1 $vg2 $d1 $d2 $d3 &&
+ lvremove -f $vg2/$lv1 &&
+ vgremove -f $vg2'
test_done
# Local Variables: