This is the mail archive of the libc-alpha@sourceware.org mailing list for the glibc project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

manual: Complete @standards in lang.texi.


	* manual/lang.texi (LDBL_MANT_DIG): Add annotation.
	(LDBL_DIG): Likewise.
	(LDBL_MIN_EXP): Likewise.
	(LDBL_MIN_10_EXP): Likewise.
	(LDBL_MAX_EXP): Likewise.
	(LDBL_MAX_10_EXP): Likewise.
	(LDBL_MAX): Likewise.
	(LDBL_MIN): Likewise.
	(LDBL_EPSILON): Likewise.
	(FLT_ROUNDS): Change standard from ISO to C90.
	(FLT_RADIX): Likewise.
	(FLT_MANT_DIG, DBL_MANT_DIG): Likewise.
	(FLT_DIG, DBL_DIG): Likewise.
	(FLT_MIN_EXP, DBL_MIN_EXP): Likewise.
	(FLT_MIN_10_EXP, DBL_MIN_10_EXP): Likewise.
	(FLT_MAX_EXP, DBL_MAX_EXP): Likewise.
	(FLT_MAX_10_EXP, DBL_MAX_10_EXP): Likewise.
	(FLT_MAX, DBL_MAX): Likewise.
	(FLT_MIN, DBL_MIN): Likewise.
	(FLT_EPSILON, DBL_EPSILON): Likewise.
---
 manual/lang.texi | 40 ++++++++++++++++++++--------------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/manual/lang.texi b/manual/lang.texi
index cacbdfb7c5..c4b641d4e1 100644
--- a/manual/lang.texi
+++ b/manual/lang.texi
@@ -969,7 +969,7 @@ supported are suitable.
 
 @vtable @code
 @item FLT_ROUNDS
-@standards{ISO, float.h}
+@standards{C90, float.h}
 This value characterizes the rounding mode for floating point addition.
 The following values indicate standard rounding modes:
 
@@ -1008,14 +1008,14 @@ the IEEE single-precision standard.
 @end smallexample
 
 @item FLT_RADIX
-@standards{ISO, float.h}
+@standards{C90, float.h}
 This is the value of the base, or radix, of the exponent representation.
 This is guaranteed to be a constant expression, unlike the other macros
 described in this section.  The value is 2 on all machines we know of
 except the IBM 360 and derivatives.
 
 @item FLT_MANT_DIG
-@standards{ISO, float.h}
+@standards{C90, float.h}
 This is the number of base-@code{FLT_RADIX} digits in the floating point
 mantissa for the @code{float} data type.  The following expression
 yields @code{1.0} (even though mathematically it should not) due to the
@@ -1032,14 +1032,14 @@ where @code{radix} appears @code{FLT_MANT_DIG} times.
 
 @item DBL_MANT_DIG
 @itemx LDBL_MANT_DIG
-@standardsx{DBL_MANT_DIG, ISO, float.h}
+@standards{C90, float.h}
 This is the number of base-@code{FLT_RADIX} digits in the floating point
 mantissa for the data types @code{double} and @code{long double},
 respectively.
 
 @comment Extra blank lines make it look better.
 @item FLT_DIG
-@standards{ISO, float.h}
+@standards{C90, float.h}
 
 This is the number of decimal digits of precision for the @code{float}
 data type.  Technically, if @var{p} and @var{b} are the precision and
@@ -1054,14 +1054,14 @@ The value of this macro is supposed to be at least @code{6}, to satisfy
 
 @item DBL_DIG
 @itemx LDBL_DIG
-@standardsx{DBL_DIG, ISO, float.h}
+@standards{C90, float.h}
 
 These are similar to @code{FLT_DIG}, but for the data types
 @code{double} and @code{long double}, respectively.  The values of these
 macros are supposed to be at least @code{10}.
 
 @item FLT_MIN_EXP
-@standards{ISO, float.h}
+@standards{C90, float.h}
 This is the smallest possible exponent value for type @code{float}.
 More precisely, it is the minimum negative integer such that the value
 @code{FLT_RADIX} raised to this power minus 1 can be represented as a
@@ -1069,25 +1069,25 @@ normalized floating point number of type @code{float}.
 
 @item DBL_MIN_EXP
 @itemx LDBL_MIN_EXP
-@standardsx{DBL_MIN_EXP, ISO, float.h}
+@standards{C90, float.h}
 
 These are similar to @code{FLT_MIN_EXP}, but for the data types
 @code{double} and @code{long double}, respectively.
 
 @item FLT_MIN_10_EXP
-@standards{ISO, float.h}
+@standards{C90, float.h}
 This is the minimum negative integer such that @code{10} raised to this
 power minus 1 can be represented as a normalized floating point number
 of type @code{float}.  This is supposed to be @code{-37} or even less.
 
 @item DBL_MIN_10_EXP
 @itemx LDBL_MIN_10_EXP
-@standardsx{DBL_MIN_10_EXP, ISO, float.h}
+@standards{C90, float.h}
 These are similar to @code{FLT_MIN_10_EXP}, but for the data types
 @code{double} and @code{long double}, respectively.
 
 @item FLT_MAX_EXP
-@standards{ISO, float.h}
+@standards{C90, float.h}
 This is the largest possible exponent value for type @code{float}.  More
 precisely, this is the maximum positive integer such that value
 @code{FLT_RADIX} raised to this power minus 1 can be represented as a
@@ -1095,24 +1095,24 @@ floating point number of type @code{float}.
 
 @item DBL_MAX_EXP
 @itemx LDBL_MAX_EXP
-@standardsx{DBL_MAX_EXP, ISO, float.h}
+@standards{C90, float.h}
 These are similar to @code{FLT_MAX_EXP}, but for the data types
 @code{double} and @code{long double}, respectively.
 
 @item FLT_MAX_10_EXP
-@standards{ISO, float.h}
+@standards{C90, float.h}
 This is the maximum positive integer such that @code{10} raised to this
 power minus 1 can be represented as a normalized floating point number
 of type @code{float}.  This is supposed to be at least @code{37}.
 
 @item DBL_MAX_10_EXP
 @itemx LDBL_MAX_10_EXP
-@standardsx{DBL_MAX_10_EXP, ISO, float.h}
+@standards{C90, float.h}
 These are similar to @code{FLT_MAX_10_EXP}, but for the data types
 @code{double} and @code{long double}, respectively.
 
 @item FLT_MAX
-@standards{ISO, float.h}
+@standards{C90, float.h}
 
 The value of this macro is the maximum number representable in type
 @code{float}.  It is supposed to be at least @code{1E+37}.  The value
@@ -1122,14 +1122,14 @@ The smallest representable number is @code{- FLT_MAX}.
 
 @item DBL_MAX
 @itemx LDBL_MAX
-@standardsx{DBL_MAX, ISO, float.h}
+@standards{C90, float.h}
 
 These are similar to @code{FLT_MAX}, but for the data types
 @code{double} and @code{long double}, respectively.  The type of the
 macro's value is the same as the type it describes.
 
 @item FLT_MIN
-@standards{ISO, float.h}
+@standards{C90, float.h}
 
 The value of this macro is the minimum normalized positive floating
 point number that is representable in type @code{float}.  It is supposed
@@ -1137,14 +1137,14 @@ to be no more than @code{1E-37}.
 
 @item DBL_MIN
 @itemx LDBL_MIN
-@standardsx{DBL_MIN, ISO, float.h}
+@standards{C90, float.h}
 
 These are similar to @code{FLT_MIN}, but for the data types
 @code{double} and @code{long double}, respectively.  The type of the
 macro's value is the same as the type it describes.
 
 @item FLT_EPSILON
-@standards{ISO, float.h}
+@standards{C90, float.h}
 
 This is the difference between 1 and the smallest floating point
 number of type @code{float} that is greater than 1.  It's supposed to
@@ -1152,7 +1152,7 @@ be no greater than @code{1E-5}.
 
 @item DBL_EPSILON
 @itemx LDBL_EPSILON
-@standardsx{DBL_EPSILON, ISO, float.h}
+@standards{C90, float.h}
 
 These are similar to @code{FLT_EPSILON}, but for the data types
 @code{double} and @code{long double}, respectively.  The type of the
-- 
2.12.2


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]