This is the mail archive of the libc-alpha@sourceware.org mailing list for the glibc project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

soft-fp: Fix comment formatting


This patch fixes formatting of comments in soft-fp (in particular, the
normal style in glibc does not have a leading '*' on each line, and
comments should start with capital letters and end with ".  */").

Tested for powerpc-nofpu that the disassembly of installed shared
libraries is unchanged by this patch.

Committed as obvious.

2014-09-17  Joseph Myers  <joseph@codesourcery.com>

	* soft-fp/extended.h: Fix comment formatting.
	* soft-fp/op-1.h: Likewise.
	* soft-fp/op-2.h: Likewise.
	* soft-fp/op-4.h: Likewise.
	* soft-fp/op-8.h: Likewise.
	* soft-fp/op-common.h: Likewise.
	* soft-fp/soft-fp.h: Likewise.

diff --git a/soft-fp/extended.h b/soft-fp/extended.h
index 940bdf1..989b056 100644
--- a/soft-fp/extended.h
+++ b/soft-fp/extended.h
@@ -232,16 +232,14 @@ union _FP_UNION_E
 # define FP_SQRT_E(R, X)	_FP_SQRT (E, 4, R, X)
 # define FP_FMA_E(R, X, Y, Z)	_FP_FMA (E, 4, 8, R, X, Y, Z)
 
-/*
- * Square root algorithms:
- * We have just one right now, maybe Newton approximation
- * should be added for those machines where division is fast.
- * This has special _E version because standard _4 square
- * root would not work (it has to start normally with the
- * second word and not the first), but as we have to do it
- * anyway, we optimize it by doing most of the calculations
- * in two UWtype registers instead of four.
- */
+/* Square root algorithms:
+   We have just one right now, maybe Newton approximation
+   should be added for those machines where division is fast.
+   This has special _E version because standard _4 square
+   root would not work (it has to start normally with the
+   second word and not the first), but as we have to do it
+   anyway, we optimize it by doing most of the calculations
+   in two UWtype registers instead of four.  */
 
 # define _FP_SQRT_MEAT_E(R, S, T, X, q)			\
   do							\
@@ -458,14 +456,12 @@ union _FP_UNION_E
 # define FP_SQRT_E(R, X)	_FP_SQRT (E, 2, R, X)
 # define FP_FMA_E(R, X, Y, Z)	_FP_FMA (E, 2, 4, R, X, Y, Z)
 
-/*
- * Square root algorithms:
- * We have just one right now, maybe Newton approximation
- * should be added for those machines where division is fast.
- * We optimize it by doing most of the calculations
- * in one UWtype registers instead of two, although we don't
- * have to.
- */
+/* Square root algorithms:
+   We have just one right now, maybe Newton approximation
+   should be added for those machines where division is fast.
+   We optimize it by doing most of the calculations
+   in one UWtype registers instead of two, although we don't
+   have to.  */
 # define _FP_SQRT_MEAT_E(R, S, T, X, q)			\
   do							\
     {							\
diff --git a/soft-fp/op-1.h b/soft-fp/op-1.h
index 3547e74..fa68269 100644
--- a/soft-fp/op-1.h
+++ b/soft-fp/op-1.h
@@ -73,7 +73,7 @@
 #define _FP_FRAC_DEC_1(X, Y)	(X##_f -= Y##_f)
 #define _FP_FRAC_CLZ_1(z, X)	__FP_CLZ (z, X##_f)
 
-/* Predicates */
+/* Predicates.  */
 #define _FP_FRAC_NEGP_1(X)	((_FP_WS_TYPE) X##_f < 0)
 #define _FP_FRAC_ZEROP_1(X)	(X##_f == 0)
 #define _FP_FRAC_OVERP_1(fs, X)	(X##_f & _FP_OVERFLOW_##fs)
@@ -87,10 +87,8 @@
 #define _FP_MINFRAC_1		1
 #define _FP_MAXFRAC_1		(~(_FP_WS_TYPE) 0)
 
-/*
- * Unpack the raw bits of a native fp value.  Do not classify or
- * normalize the data.
- */
+/* Unpack the raw bits of a native fp value.  Do not classify or
+   normalize the data.  */
 
 #define _FP_UNPACK_RAW_1(fs, X, val)			\
   do							\
@@ -116,9 +114,7 @@
     }							\
   while (0)
 
-/*
- * Repack the raw bits of a native fp value.
- */
+/* Repack the raw bits of a native fp value.  */
 
 #define _FP_PACK_RAW_1(fs, val, X)		\
   do						\
@@ -146,9 +142,7 @@
   while (0)
 
 
-/*
- * Multiplication algorithms:
- */
+/* Multiplication algorithms: */
 
 /* Basic.  Assuming the host word size is >= 2*FRACBITS, we can do the
    multiplication immediately.  */
@@ -203,7 +197,7 @@
       _FP_W_TYPE _FP_MUL_MEAT_DW_1_hard_yh, _FP_MUL_MEAT_DW_1_hard_yl;	\
       _FP_FRAC_DECL_2 (_FP_MUL_MEAT_DW_1_hard_a);			\
 									\
-      /* split the words in half */					\
+      /* Split the words in half.  */					\
       _FP_MUL_MEAT_DW_1_hard_xh = X##_f >> (_FP_W_TYPE_SIZE/2);		\
       _FP_MUL_MEAT_DW_1_hard_xl						\
 	= X##_f & (((_FP_W_TYPE) 1 << (_FP_W_TYPE_SIZE/2)) - 1);	\
@@ -211,7 +205,7 @@
       _FP_MUL_MEAT_DW_1_hard_yl						\
 	= Y##_f & (((_FP_W_TYPE) 1 << (_FP_W_TYPE_SIZE/2)) - 1);	\
 									\
-      /* multiply the pieces */						\
+      /* Multiply the pieces.  */					\
       R##_f0 = _FP_MUL_MEAT_DW_1_hard_xl * _FP_MUL_MEAT_DW_1_hard_yl;	\
       _FP_MUL_MEAT_DW_1_hard_a_f0					\
 	= _FP_MUL_MEAT_DW_1_hard_xh * _FP_MUL_MEAT_DW_1_hard_yl;	\
@@ -219,7 +213,7 @@
 	= _FP_MUL_MEAT_DW_1_hard_xl * _FP_MUL_MEAT_DW_1_hard_yh;	\
       R##_f1 = _FP_MUL_MEAT_DW_1_hard_xh * _FP_MUL_MEAT_DW_1_hard_yh;	\
 									\
-      /* reassemble into two full words */				\
+      /* Reassemble into two full words.  */				\
       if ((_FP_MUL_MEAT_DW_1_hard_a_f0 += _FP_MUL_MEAT_DW_1_hard_a_f1)	\
 	  < _FP_MUL_MEAT_DW_1_hard_a_f1)				\
 	R##_f1 += (_FP_W_TYPE) 1 << (_FP_W_TYPE_SIZE/2);		\
@@ -237,7 +231,7 @@
       _FP_FRAC_DECL_2 (_FP_MUL_MEAT_1_hard_z);				\
       _FP_MUL_MEAT_DW_1_hard (wfracbits, _FP_MUL_MEAT_1_hard_z, X, Y);	\
 									\
-      /* normalize */							\
+      /* Normalize.  */							\
       _FP_FRAC_SRS_2 (_FP_MUL_MEAT_1_hard_z,				\
 		      wfracbits - 1, 2*wfracbits);			\
       R##_f = _FP_MUL_MEAT_1_hard_z_f0;					\
@@ -245,9 +239,7 @@
   while (0)
 
 
-/*
- * Division algorithms:
- */
+/* Division algorithms: */
 
 /* Basic.  Assuming the host word size is >= 2*FRACBITS, we can do the
    division immediately.  Give this macro either _FP_DIV_HELP_imm for
@@ -330,11 +322,9 @@
   while (0)
 
 
-/*
- * Square root algorithms:
- * We have just one right now, maybe Newton approximation
- * should be added for those machines where division is fast.
- */
+/* Square root algorithms:
+   We have just one right now, maybe Newton approximation
+   should be added for those machines where division is fast.  */
 
 #define _FP_SQRT_MEAT_1(R, S, T, X, q)		\
   do						\
@@ -360,17 +350,13 @@
     }						\
   while (0)
 
-/*
- * Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
+/* Assembly/disassembly for converting to/from integral types.
+   No shifting or overflow handled here.  */
 
 #define _FP_FRAC_ASSEMBLE_1(r, X, rsize)	(r = X##_f)
 #define _FP_FRAC_DISASSEMBLE_1(X, r, rsize)	(X##_f = r)
 
 
-/*
- * Convert FP values between word sizes
- */
+/* Convert FP values between word sizes.  */
 
 #define _FP_FRAC_COPY_1_1(D, S)		(D##_f = S##_f)
diff --git a/soft-fp/op-2.h b/soft-fp/op-2.h
index 4ea2a00..6a6f938 100644
--- a/soft-fp/op-2.h
+++ b/soft-fp/op-2.h
@@ -131,7 +131,7 @@
     }						\
   while (0)
 
-/* Predicates */
+/* Predicates.  */
 #define _FP_FRAC_NEGP_2(X)	((_FP_WS_TYPE) X##_f1 < 0)
 #define _FP_FRAC_ZEROP_2(X)	((X##_f1 | X##_f0) == 0)
 #define _FP_FRAC_OVERP_2(fs, X)	(_FP_FRAC_HIGH_##fs (X) & _FP_OVERFLOW_##fs)
@@ -148,9 +148,7 @@
 #define _FP_MINFRAC_2		0, 1
 #define _FP_MAXFRAC_2		(~(_FP_WS_TYPE) 0), (~(_FP_WS_TYPE) 0)
 
-/*
- * Internals
- */
+/* Internals.  */
 
 #define __FP_FRAC_SET_2(X, I1, I0)	(X##_f0 = I0, X##_f1 = I1)
 
@@ -205,10 +203,8 @@
 
 #endif
 
-/*
- * Unpack the raw bits of a native fp value.  Do not classify or
- * normalize the data.
- */
+/* Unpack the raw bits of a native fp value.  Do not classify or
+   normalize the data.  */
 
 #define _FP_UNPACK_RAW_2(fs, X, val)			\
   do							\
@@ -237,9 +233,7 @@
   while (0)
 
 
-/*
- * Repack the raw bits of a native fp value.
- */
+/* Repack the raw bits of a native fp value.  */
 
 #define _FP_PACK_RAW_2(fs, val, X)		\
   do						\
@@ -269,9 +263,7 @@
   while (0)
 
 
-/*
- * Multiplication algorithms:
- */
+/* Multiplication algorithms: */
 
 /* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
 
@@ -532,9 +524,7 @@
     }									\
   while (0)
 
-/*
- * Division algorithms:
- */
+/* Division algorithms: */
 
 #define _FP_DIV_MEAT_2_udiv(fs, R, X, Y)				\
   do									\
@@ -563,7 +553,7 @@
 	}								\
 									\
       /* Normalize, i.e. make the most significant bit of the		\
-	 denominator set. */						\
+	 denominator set.  */						\
       _FP_FRAC_SLL_2 (Y, _FP_WFRACXBITS_##fs);				\
 									\
       udiv_qrnnd (R##_f1, _FP_DIV_MEAT_2_udiv_r_f1,			\
@@ -630,11 +620,9 @@
   while (0)
 
 
-/*
- * Square root algorithms:
- * We have just one right now, maybe Newton approximation
- * should be added for those machines where division is fast.
- */
+/* Square root algorithms:
+   We have just one right now, maybe Newton approximation
+   should be added for those machines where division is fast.  */
 
 #define _FP_SQRT_MEAT_2(R, S, T, X, q)				\
   do								\
@@ -678,10 +666,8 @@
   while (0)
 
 
-/*
- * Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
+/* Assembly/disassembly for converting to/from integral types.
+   No shifting or overflow handled here.  */
 
 #define _FP_FRAC_ASSEMBLE_2(r, X, rsize)	\
   (void) ((rsize <= _FP_W_TYPE_SIZE)		\
@@ -700,9 +686,7 @@
     }									\
   while (0)
 
-/*
- * Convert FP values between word sizes
- */
+/* Convert FP values between word sizes.  */
 
 #define _FP_FRAC_COPY_1_2(D, S)		(D##_f = S##_f0)
 
diff --git a/soft-fp/op-4.h b/soft-fp/op-4.h
index 3acf96c..12731e2 100644
--- a/soft-fp/op-4.h
+++ b/soft-fp/op-4.h
@@ -70,7 +70,7 @@
     }									\
   while (0)
 
-/* This one was broken too */
+/* This one was broken too.  */
 #define _FP_FRAC_SRL_4(X, N)						\
   do									\
     {									\
@@ -104,10 +104,9 @@
 
 
 /* Right shift with sticky-lsb.
- * What this actually means is that we do a standard right-shift,
- * but that if any of the bits that fall off the right hand side
- * were one then we always set the LSbit.
- */
+   What this actually means is that we do a standard right-shift,
+   but that if any of the bits that fall off the right hand side
+   were one then we always set the LSbit.  */
 #define _FP_FRAC_SRST_4(X, S, N, size)					\
   do									\
     {									\
@@ -290,9 +289,7 @@
     }							\
   while (0)
 
-/*
- * Multiplication algorithms:
- */
+/* Multiplication algorithms: */
 
 /* Given a 1W * 1W => 2W primitive, do the extended multiplication.  */
 
@@ -467,10 +464,8 @@
     }									\
   while (0)
 
-/*
- * Helper utility for _FP_DIV_MEAT_4_udiv:
- * pppp = m * nnn
- */
+/* Helper utility for _FP_DIV_MEAT_4_udiv:
+ * pppp = m * nnn.  */
 #define umul_ppppmnnn(p3, p2, p1, p0, m, n2, n1, n0)	\
   do							\
     {							\
@@ -483,9 +478,7 @@
     }							\
   while (0)
 
-/*
- * Division algorithms:
- */
+/* Division algorithms: */
 
 #define _FP_DIV_MEAT_4_udiv(fs, R, X, Y)				\
   do									\
@@ -504,7 +497,7 @@
 	R##_e--;							\
 									\
       /* Normalize, i.e. make the most significant bit of the		\
-	 denominator set. */						\
+	 denominator set.  */						\
       _FP_FRAC_SLL_4 (Y, _FP_WFRACXBITS_##fs);				\
 									\
       for (_FP_DIV_MEAT_4_udiv_i = 3; ; _FP_DIV_MEAT_4_udiv_i--)	\
@@ -568,11 +561,9 @@
   while (0)
 
 
-/*
- * Square root algorithms:
- * We have just one right now, maybe Newton approximation
- * should be added for those machines where division is fast.
- */
+/* Square root algorithms:
+   We have just one right now, maybe Newton approximation
+   should be added for those machines where division is fast.  */
 
 #define _FP_SQRT_MEAT_4(R, S, T, X, q)					\
   do									\
@@ -657,9 +648,7 @@
   while (0)
 
 
-/*
- * Internals
- */
+/* Internals.  */
 
 #define __FP_FRAC_SET_4(X, I3, I2, I1, I0)			\
   (X##_f[3] = I3, X##_f[2] = I2, X##_f[1] = I1, X##_f[0] = I0)
@@ -787,12 +776,11 @@
 #endif
 
 /* Convert FP values between word sizes. This appears to be more
- * complicated than I'd have expected it to be, so these might be
- * wrong... These macros are in any case somewhat bogus because they
- * use information about what various FRAC_n variables look like
- * internally [eg, that 2 word vars are X_f0 and x_f1]. But so do
- * the ones in op-2.h and op-1.h.
- */
+   complicated than I'd have expected it to be, so these might be
+   wrong... These macros are in any case somewhat bogus because they
+   use information about what various FRAC_n variables look like
+   internally [eg, that 2 word vars are X_f0 and x_f1]. But so do
+   the ones in op-2.h and op-1.h.  */
 #define _FP_FRAC_COPY_1_4(D, S)		(D##_f = S##_f[0])
 
 #define _FP_FRAC_COPY_2_4(D, S)			\
@@ -804,9 +792,8 @@
   while (0)
 
 /* Assembly/disassembly for converting to/from integral types.
- * No shifting or overflow handled here.
- */
-/* Put the FP value X into r, which is an integer of size rsize. */
+   No shifting or overflow handled here.  */
+/* Put the FP value X into r, which is an integer of size rsize.  */
 #define _FP_FRAC_ASSEMBLE_4(r, X, rsize)				\
   do									\
     {									\
@@ -820,8 +807,8 @@
 	}								\
       else								\
 	{								\
-	  /* I'm feeling lazy so we deal with int == 3words (implausible)*/ \
-	  /* and int == 4words as a single case.			 */ \
+	  /* I'm feeling lazy so we deal with int == 3words		\
+	     (implausible) and int == 4words as a single case.  */	\
 	  r = X##_f[3];							\
 	  r = (rsize <= _FP_W_TYPE_SIZE ? 0 : r << _FP_W_TYPE_SIZE);	\
 	  r += X##_f[2];						\
@@ -834,10 +821,9 @@
   while (0)
 
 /* "No disassemble Number Five!" */
-/* move an integer of size rsize into X's fractional part. We rely on
- * the _f[] array consisting of words of size _FP_W_TYPE_SIZE to avoid
- * having to mask the values we store into it.
- */
+/* Move an integer of size rsize into X's fractional part. We rely on
+   the _f[] array consisting of words of size _FP_W_TYPE_SIZE to avoid
+   having to mask the values we store into it.  */
 #define _FP_FRAC_DISASSEMBLE_4(X, r, rsize)				\
   do									\
     {									\
diff --git a/soft-fp/op-8.h b/soft-fp/op-8.h
index c966ee2..a47799f 100644
--- a/soft-fp/op-8.h
+++ b/soft-fp/op-8.h
@@ -30,7 +30,7 @@
    <http://www.gnu.org/licenses/>.  */
 
 /* We need just a few things from here for op-4, if we ever need some
-   other macros, they can be added. */
+   other macros, they can be added.  */
 #define _FP_FRAC_DECL_8(X)	_FP_W_TYPE X##_f[8]
 #define _FP_FRAC_HIGH_8(X)	(X##_f[7])
 #define _FP_FRAC_LOW_8(X)	(X##_f[0])
@@ -100,10 +100,9 @@
 
 
 /* Right shift with sticky-lsb.
- * What this actually means is that we do a standard right-shift,
- * but that if any of the bits that fall off the right hand side
- * were one then we always set the LSbit.
- */
+   What this actually means is that we do a standard right-shift,
+   but that if any of the bits that fall off the right hand side
+   were one then we always set the LSbit.  */
 #define _FP_FRAC_SRS_8(X, N, size)					\
   do									\
     {									\
@@ -139,8 +138,8 @@
 	}								\
       for (; _FP_FRAC_SRS_8_i < 8; ++_FP_FRAC_SRS_8_i)			\
 	X##_f[_FP_FRAC_SRS_8_i] = 0;					\
-      /* don't fix the LSB until the very end when we're sure f[0] is	\
-	 stable */							\
+      /* Don't fix the LSB until the very end when we're sure f[0] is	\
+	 stable.  */							\
       X##_f[0] |= (_FP_FRAC_SRS_8_s != 0);				\
     }									\
   while (0)
diff --git a/soft-fp/op-common.h b/soft-fp/op-common.h
index 5852a86..ec0bc42 100644
--- a/soft-fp/op-common.h
+++ b/soft-fp/op-common.h
@@ -45,10 +45,8 @@
    ? (_FP_FRAC_HIGH_##fs (X) & _FP_QNANBIT_SH_##fs)	\
    : !(_FP_FRAC_HIGH_##fs (X) & _FP_QNANBIT_SH_##fs))
 
-/*
- * Finish truly unpacking a native fp value by classifying the kind
- * of fp value and normalizing both the exponent and the fraction.
- */
+/* Finish truly unpacking a native fp value by classifying the kind
+   of fp value and normalizing both the exponent and the fraction.  */
 
 #define _FP_UNPACK_CANONICAL(fs, wc, X)				\
   do								\
@@ -67,7 +65,7 @@
 	    X##_c = FP_CLS_ZERO;				\
 	  else							\
 	    {							\
-	      /* a denormalized number */			\
+	      /* A denormalized number.  */			\
 	      _FP_I_TYPE _FP_UNPACK_CANONICAL_shift;		\
 	      _FP_FRAC_CLZ_##wc (_FP_UNPACK_CANONICAL_shift,	\
 				 X);				\
@@ -87,7 +85,7 @@
 	  else							\
 	    {							\
 	      X##_c = FP_CLS_NAN;				\
-	      /* Check for signaling NaN */			\
+	      /* Check for signaling NaN.  */			\
 	      if (_FP_FRAC_SNANP (fs, X))			\
 		FP_SET_EXCEPTION (FP_EX_INVALID);		\
 	    }							\
@@ -237,12 +235,10 @@
     }								\
   while (0)
 
-/*
- * Before packing the bits back into the native fp result, take care
- * of such mundane things as rounding and overflow.  Also, for some
- * kinds of fp values, the original parts may not have been fully
- * extracted -- but that is ok, we can regenerate them now.
- */
+/* Before packing the bits back into the native fp result, take care
+   of such mundane things as rounding and overflow.  Also, for some
+   kinds of fp values, the original parts may not have been fully
+   extracted -- but that is ok, we can regenerate them now.  */
 
 #define _FP_PACK_CANONICAL(fs, wc, X)					\
   do									\
@@ -262,7 +258,7 @@
 	      _FP_FRAC_SRL_##wc (X, _FP_WORKBITS);			\
 	      if (X##_e >= _FP_EXPMAX_##fs)				\
 		{							\
-		  /* overflow */					\
+		  /* Overflow.  */					\
 		  switch (FP_ROUNDMODE)					\
 		    {							\
 		    case FP_RND_NEAREST:				\
@@ -279,13 +275,13 @@
 		    }							\
 		  if (X##_c == FP_CLS_INF)				\
 		    {							\
-		      /* Overflow to infinity */			\
+		      /* Overflow to infinity.  */			\
 		      X##_e = _FP_EXPMAX_##fs;				\
 		      _FP_FRAC_SET_##wc (X, _FP_ZEROFRAC_##wc);		\
 		    }							\
 		  else							\
 		    {							\
-		      /* Overflow to maximum normal */			\
+		      /* Overflow to maximum normal.  */		\
 		      X##_e = _FP_EXPMAX_##fs - 1;			\
 		      _FP_FRAC_SET_##wc (X, _FP_MAXFRAC_##wc);		\
 		    }							\
@@ -295,7 +291,7 @@
 	    }								\
 	  else								\
 	    {								\
-	      /* we've got a denormalized number */			\
+	      /* We've got a denormalized number.  */			\
 	      int _FP_PACK_CANONICAL_is_tiny = 1;			\
 	      if (_FP_TININESS_AFTER_ROUNDING && X##_e == 0)		\
 		{							\
@@ -332,7 +328,7 @@
 		}							\
 	      else							\
 		{							\
-		  /* underflow to zero */				\
+		  /* Underflow to zero.  */				\
 		  X##_e = 0;						\
 		  if (!_FP_FRAC_ZEROP_##wc (X))				\
 		    {							\
@@ -370,8 +366,7 @@
   while (0)
 
 /* This one accepts raw argument and not cooked,  returns
- * 1 if X is a signaling NaN.
- */
+   1 if X is a signaling NaN.  */
 #define _FP_ISSIGNAN(fs, wc, X)			\
   ({						\
     int _FP_ISSIGNAN_ret = 0;			\
@@ -833,9 +828,7 @@
   while (0)
 
 
-/*
- * Main negation routine.  The input value is raw.
- */
+/* Main negation routine.  The input value is raw.  */
 
 #define _FP_NEG(fs, wc, R, X)			\
   do						\
@@ -847,9 +840,7 @@
   while (0)
 
 
-/*
- * Main multiplication routine.  The input values should be cooked.
- */
+/* Main multiplication routine.  The input values should be cooked.  */
 
 #define _FP_MUL(fs, wc, R, X, Y)				\
   do								\
@@ -1132,9 +1123,7 @@
   while (0)
 
 
-/*
- * Main division routine.  The input values should be cooked.
- */
+/* Main division routine.  The input values should be cooked.  */
 
 #define _FP_DIV(fs, wc, R, X, Y)				\
   do								\
@@ -1197,15 +1186,13 @@
   while (0)
 
 
-/*
- * Main differential comparison routine.  The inputs should be raw not
- * cooked.  The return is -1,0,1 for normal values, 2 otherwise.
- */
+/* Main differential comparison routine.  The inputs should be raw not
+   cooked.  The return is -1,0,1 for normal values, 2 otherwise.  */
 
 #define _FP_CMP(fs, wc, ret, X, Y, un)					\
   do									\
     {									\
-      /* NANs are unordered */						\
+      /* NANs are unordered.  */					\
       if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc (X))	\
 	  || (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc (Y)))	\
 	{								\
@@ -1249,7 +1236,7 @@
 #define _FP_CMP_EQ(fs, wc, ret, X, Y)					\
   do									\
     {									\
-      /* NANs are unordered */						\
+      /* NANs are unordered.  */					\
       if ((X##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc (X))	\
 	  || (Y##_e == _FP_EXPMAX_##fs && !_FP_FRAC_ZEROP_##wc (Y)))	\
 	{								\
@@ -1274,9 +1261,7 @@
     }									\
   while (0)
 
-/*
- * Main square root routine.  The input value should be cooked.
- */
+/* Main square root routine.  The input value should be cooked.  */
 
 #define _FP_SQRT(fs, wc, R, X)					\
   do								\
@@ -1332,21 +1317,18 @@
     }								\
   while (0)
 
-/*
- * Convert from FP to integer.  Input is raw.
- */
+/* Convert from FP to integer.  Input is raw.  */
 
 /* RSIGNED can have following values:
- * 0:  the number is required to be 0..(2^rsize)-1, if not, NV is set plus
- *     the result is either 0 or (2^rsize)-1 depending on the sign in such
- *     case.
- * 1:  the number is required to be -(2^(rsize-1))..(2^(rsize-1))-1, if not,
- *     NV is set plus the result is either -(2^(rsize-1)) or (2^(rsize-1))-1
- *     depending on the sign in such case.
- * -1: the number is required to be -(2^(rsize-1))..(2^rsize)-1, if not, NV is
- *     set plus the result is either -(2^(rsize-1)) or (2^(rsize-1))-1
- *     depending on the sign in such case.
- */
+   0:  the number is required to be 0..(2^rsize)-1, if not, NV is set plus
+       the result is either 0 or (2^rsize)-1 depending on the sign in such
+       case.
+   1:  the number is required to be -(2^(rsize-1))..(2^(rsize-1))-1, if not,
+       NV is set plus the result is either -(2^(rsize-1)) or (2^(rsize-1))-1
+       depending on the sign in such case.
+   -1: the number is required to be -(2^(rsize-1))..(2^rsize)-1, if not, NV is
+       set plus the result is either -(2^(rsize-1)) or (2^(rsize-1))-1
+       depending on the sign in such case.  */
 #define _FP_TO_INT(fs, wc, r, X, rsize, rsigned)			\
   do									\
     {									\
@@ -1656,9 +1638,7 @@
     }									\
   while (0)
 
-/*
- * Helper primitives.
- */
+/* Helper primitives.  */
 
 /* Count leading zeros in a word.  */
 
diff --git a/soft-fp/soft-fp.h b/soft-fp/soft-fp.h
index 8d0efa5..5fb7358 100644
--- a/soft-fp/soft-fp.h
+++ b/soft-fp/soft-fp.h
@@ -38,7 +38,7 @@
 # include "sfp-machine.h"
 #endif
 
-/* Allow sfp-machine to have its own byte order definitions. */
+/* Allow sfp-machine to have its own byte order definitions.  */
 #ifndef __BYTE_ORDER
 # ifdef _LIBC
 #  include <endian.h>
@@ -63,7 +63,7 @@
 # define FP_ROUNDMODE		FP_RND_NEAREST
 #endif
 
-/* By default don't care about exceptions. */
+/* By default don't care about exceptions.  */
 #ifndef FP_EX_INVALID
 # define FP_EX_INVALID		0
 #endif
@@ -119,10 +119,9 @@
 
 #ifndef FP_INHIBIT_RESULTS
 /* By default we write the results always.
- * sfp-machine may override this and e.g.
- * check if some exceptions are unmasked
- * and inhibit it in such a case.
- */
+   sfp-machine may override this and e.g.
+   check if some exceptions are unmasked
+   and inhibit it in such a case.  */
 # define FP_INHIBIT_RESULTS 0
 #endif
 

-- 
Joseph S. Myers
joseph@codesourcery.com


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]