This is the mail archive of the
insight@sourceware.cygnus.com
mailing list for the Insight project.
RE: configuring for arm-elf-gdb
- To: ahare at btinternet dot com
- Subject: RE: configuring for arm-elf-gdb
- From: morten dot larsen at acte dot no
- Date: Mon, 13 Mar 2000 15:06:43 +0100
- Cc: insight at sourceware dot cygnus dot com
Hi,
as I am fairly new to (cross)GCC and GDB/Insight (using ARM's SDT
previously),
I wonder if you have examples of the following:
1) Makefile for build&install of the board support routines supplied by
Atmel
(unless you use your own ...)
2) Linker script for linking the support library (from 1)) w. user program.
Even a fragment or skeleton of any of these would help ...
(besides, can GCC be instructed to generate Thumb-specific code?)
-Thanks
Rgds:
Morten Larsen,
ACTE Norway AS
-----Original Message-----
From: Andy Hare [mailto:ahare@btinternet.com]
Sent: Monday, March 06, 2000 11:05 PM
To: javelina
Cc: Insight Mail list
Subject: Re: configuring for arm-elf-gdb
Hi
I have been building Insight-GDB under cygnus b20.1 under NT. Below is
the following rules extracted from a makefile that I use to build all the
GNU toolset.
.PHONY: config-insight
config-insight:
cd /c/cygnus/build/insight ; \
rm * -r ; \
/c/cygnus/GNU-Source-Code/insight/configure -v \
--prefix=/c/cygnus/xgcc-arm/insight \
--exec-prefix=/c/cygnus/xgcc-arm/insight \
--host=i586-cygwin32 --target=arm-elf >configure.out
.PHONY: clean-insight
clean-insight:
cd /c/cygnus/build/insight ; \
make clean
.PHONY: insight
insight:
cd /c/cygnus/build/insight ; \
make -w all install LIBGCC2_DEBUG_CFLAGS="-g1 -O1" LANGUAGES="c c++" >
make.out 2>&1
These allow me to configure and build the Insight system, I have been using
it both in the simulator mode and to connect to the ATMEL EB01 eval. board.
Andy Hare
----- Original Message -----
From: javelina <javelina@home.com>
To: <insight@sourceware.cygnus.com>
Sent: Sunday, March 05, 2000 9:14 PM
Subject: configuring for arm-elf-gdb
> Greetings,
>
> I am an ecos user and I would like to use the insight package to do GUI
> remote debugging on an ARM evaluation board. Looking at the mailing
> list archive, it appears that others have done this, but it is not clear
> to me what the steps are to build "arm-elf-gdb" instead of "gdb".
>
> Thanks,
> L3
>
>