This is the mail archive of the
glibc-cvs@sourceware.org
mailing list for the glibc project.
GNU C Library master sources branch master updated. glibc-2.19-872-g7950a4e
- From: allan at sourceware dot org
- To: glibc-cvs at sourceware dot org
- Date: 9 Aug 2014 07:15:16 -0000
- Subject: GNU C Library master sources branch master updated. glibc-2.19-872-g7950a4e
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU C Library master sources".
The branch, master has been updated
via 7950a4ee59c8a3d4c17480a368759814989fc290 (commit)
from f469c49f921d1809eed5e483606e8a859318b8c6 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://sourceware.org/git/gitweb.cgi?p=glibc.git;a=commitdiff;h=7950a4ee59c8a3d4c17480a368759814989fc290
commit 7950a4ee59c8a3d4c17480a368759814989fc290
Author: Allan McRae <allan@archlinux.org>
Date: Sat Aug 9 17:14:35 2014 +1000
Regenerate libc.po
diff --git a/ChangeLog b/ChangeLog
index af9cf96..2cc226b 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,7 @@
+2014-08-09 Allan McRae <allan@archlinux.org>
+
+ * Regenerate libc.po.
+
2014-08-08 Mike Frysinger <vapier@gentoo.org>
* intl/tst-gettext2.sh: Check every lang file for creation.
diff --git a/po/libc.pot b/po/libc.pot
index d6ec39d..72bcd20 100644
--- a/po/libc.pot
+++ b/po/libc.pot
@@ -5,8 +5,8 @@
#, fuzzy
msgid ""
msgstr ""
-"Project-Id-Version: libc 2.18.90\n"
-"POT-Creation-Date: 2014-01-05 17:40+1000\n"
+"Project-Id-Version: libc 2.19.90\n"
+"POT-Creation-Date: 2014-08-09 17:06+1000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
@@ -66,7 +66,7 @@ msgid "Give a short usage message"
msgstr ""
#: argp/argp-parse.c:103 catgets/gencat.c:109 catgets/gencat.c:113
-#: iconv/iconv_prog.c:60 iconv/iconv_prog.c:61 nscd/nscd.c:115
+#: iconv/iconv_prog.c:60 iconv/iconv_prog.c:61 nscd/nscd.c:105
#: nss/makedb.c:120
msgid "NAME"
msgstr ""
@@ -138,7 +138,7 @@ msgid ""
msgstr ""
#: catgets/gencat.c:229 debug/pcprofiledump.c:209 elf/ldconfig.c:307
-#: elf/pldd.c:219 elf/sln.c:85 elf/sprof.c:372 iconv/iconv_prog.c:408
+#: elf/pldd.c:244 elf/sln.c:85 elf/sprof.c:372 iconv/iconv_prog.c:408
#: iconv/iconvconfig.c:379 locale/programs/locale.c:277
#: locale/programs/localedef.c:376 login/programs/pt_chown.c:88
#: malloc/memusagestat.c:563 nss/getent.c:969 nss/makedb.c:369
@@ -151,11 +151,11 @@ msgid ""
msgstr ""
#: catgets/gencat.c:245 debug/pcprofiledump.c:225 debug/xtrace.sh:64
-#: elf/ldconfig.c:323 elf/ldd.bash.in:38 elf/pldd.c:235 elf/sotruss.ksh:75
+#: elf/ldconfig.c:323 elf/ldd.bash.in:38 elf/pldd.c:260 elf/sotruss.sh:75
#: elf/sprof.c:389 iconv/iconv_prog.c:425 iconv/iconvconfig.c:396
#: locale/programs/locale.c:294 locale/programs/localedef.c:402
#: login/programs/pt_chown.c:62 malloc/memusage.sh:71
-#: malloc/memusagestat.c:581 nscd/nscd.c:485 nss/getent.c:86 nss/makedb.c:385
+#: malloc/memusagestat.c:581 nscd/nscd.c:494 nss/getent.c:86 nss/makedb.c:385
#: posix/getconf.c:1103 sysdeps/unix/sysv/linux/lddlibc4.c:68
#, c-format
msgid ""
@@ -165,10 +165,10 @@ msgid ""
msgstr ""
#: catgets/gencat.c:250 debug/pcprofiledump.c:230 debug/xtrace.sh:68
-#: elf/ldconfig.c:328 elf/pldd.c:240 elf/sprof.c:395 iconv/iconv_prog.c:430
+#: elf/ldconfig.c:328 elf/pldd.c:265 elf/sprof.c:395 iconv/iconv_prog.c:430
#: iconv/iconvconfig.c:401 locale/programs/locale.c:299
#: locale/programs/localedef.c:407 malloc/memusage.sh:75
-#: malloc/memusagestat.c:586 nscd/nscd.c:490 nss/getent.c:91 nss/makedb.c:390
+#: malloc/memusagestat.c:586 nscd/nscd.c:499 nss/getent.c:91 nss/makedb.c:390
#: posix/getconf.c:1108
#, c-format
msgid "Written by %s.\n"
@@ -289,8 +289,8 @@ msgstr ""
msgid "Usage: xtrace [OPTION]... PROGRAM [PROGRAMOPTION]...\\n"
msgstr ""
-#: debug/xtrace.sh:32 elf/sotruss.ksh:56 elf/sotruss.ksh:67
-#: elf/sotruss.ksh:135 malloc/memusage.sh:26
+#: debug/xtrace.sh:32 elf/sotruss.sh:56 elf/sotruss.sh:67 elf/sotruss.sh:135
+#: malloc/memusage.sh:26
msgid "Try \\`%s --help' or \\`%s --usage' for more information.\\n"
msgstr ""
@@ -315,7 +315,7 @@ msgid ""
"\n"
msgstr ""
-#: debug/xtrace.sh:57 elf/ldd.bash.in:55 elf/sotruss.ksh:49
+#: debug/xtrace.sh:57 elf/ldd.bash.in:55 elf/sotruss.sh:49
#: malloc/memusage.sh:64
msgid "For bug reporting instructions, please see:\\\\n%s.\\\\n"
msgstr ""
@@ -411,11 +411,11 @@ msgstr ""
msgid "Renaming of %s to %s failed"
msgstr ""
-#: elf/dl-close.c:383 elf/dl-open.c:470
+#: elf/dl-close.c:385 elf/dl-open.c:470
msgid "cannot create scope list"
msgstr ""
-#: elf/dl-close.c:776
+#: elf/dl-close.c:770
msgid "shared object not open"
msgstr ""
@@ -434,15 +434,15 @@ msgid ""
"substitution\n"
msgstr ""
-#: elf/dl-deps.c:479
+#: elf/dl-deps.c:467
msgid "cannot allocate dependency list"
msgstr ""
-#: elf/dl-deps.c:516 elf/dl-deps.c:576
+#: elf/dl-deps.c:504 elf/dl-deps.c:564
msgid "cannot allocate symbol search list"
msgstr ""
-#: elf/dl-deps.c:556
+#: elf/dl-deps.c:544
msgid "Filters not supported with LD_TRACE_PRELINKING"
msgstr ""
@@ -454,15 +454,15 @@ msgstr ""
msgid "error while loading shared libraries"
msgstr ""
-#: elf/dl-fptr.c:87 ports/sysdeps/hppa/dl-fptr.c:93
+#: elf/dl-fptr.c:88 sysdeps/hppa/dl-fptr.c:94
msgid "cannot map pages for fdesc table"
msgstr ""
-#: elf/dl-fptr.c:191 ports/sysdeps/hppa/dl-fptr.c:206
+#: elf/dl-fptr.c:192 sysdeps/hppa/dl-fptr.c:207
msgid "cannot map pages for fptr table"
msgstr ""
-#: elf/dl-fptr.c:220 ports/sysdeps/hppa/dl-fptr.c:235
+#: elf/dl-fptr.c:221 sysdeps/hppa/dl-fptr.c:236
msgid "internal error: symidx out of range of fptr table"
msgstr ""
@@ -470,163 +470,163 @@ msgstr ""
msgid "cannot create capability list"
msgstr ""
-#: elf/dl-load.c:465
+#: elf/dl-load.c:423
msgid "cannot allocate name record"
msgstr ""
-#: elf/dl-load.c:550 elf/dl-load.c:666 elf/dl-load.c:749 elf/dl-load.c:868
+#: elf/dl-load.c:508 elf/dl-load.c:624 elf/dl-load.c:707 elf/dl-load.c:826
msgid "cannot create cache for search path"
msgstr ""
-#: elf/dl-load.c:641
+#: elf/dl-load.c:599
msgid "cannot create RUNPATH/RPATH copy"
msgstr ""
-#: elf/dl-load.c:735
+#: elf/dl-load.c:693
msgid "cannot create search path array"
msgstr ""
-#: elf/dl-load.c:940
+#: elf/dl-load.c:898
msgid "cannot stat shared object"
msgstr ""
-#: elf/dl-load.c:1018
+#: elf/dl-load.c:976
msgid "cannot open zero fill device"
msgstr ""
-#: elf/dl-load.c:1065 elf/dl-load.c:2348
+#: elf/dl-load.c:1023 elf/dl-load.c:2173
msgid "cannot create shared object descriptor"
msgstr ""
-#: elf/dl-load.c:1084 elf/dl-load.c:1761 elf/dl-load.c:1864
+#: elf/dl-load.c:1042 elf/dl-load.c:1583 elf/dl-load.c:1695
msgid "cannot read file data"
msgstr ""
-#: elf/dl-load.c:1130
+#: elf/dl-load.c:1082
msgid "ELF load command alignment not page-aligned"
msgstr ""
-#: elf/dl-load.c:1137
+#: elf/dl-load.c:1089
msgid "ELF load command address/offset not properly aligned"
msgstr ""
-#: elf/dl-load.c:1222
+#: elf/dl-load.c:1173
msgid "cannot allocate TLS data structures for initial thread"
msgstr ""
-#: elf/dl-load.c:1245
+#: elf/dl-load.c:1196
msgid "cannot handle TLS data"
msgstr ""
-#: elf/dl-load.c:1264
+#: elf/dl-load.c:1215
msgid "object file has no loadable segments"
msgstr ""
-#: elf/dl-load.c:1300
-msgid "failed to map segment from shared object"
-msgstr ""
-
-#: elf/dl-load.c:1326
+#: elf/dl-load.c:1224 elf/dl-load.c:1675
msgid "cannot dynamically load executable"
msgstr ""
-#: elf/dl-load.c:1389 elf/dl-load.c:1498
-msgid "cannot change memory protections"
-msgstr ""
-
-#: elf/dl-load.c:1408
-msgid "cannot map zero-fill pages"
-msgstr ""
-
-#: elf/dl-load.c:1422
+#: elf/dl-load.c:1245
msgid "object file has no dynamic section"
msgstr ""
-#: elf/dl-load.c:1445
+#: elf/dl-load.c:1268
msgid "shared object cannot be dlopen()ed"
msgstr ""
-#: elf/dl-load.c:1458
+#: elf/dl-load.c:1281
msgid "cannot allocate memory for program header"
msgstr ""
-#: elf/dl-load.c:1475 elf/dl-open.c:195
+#: elf/dl-load.c:1297 elf/dl-open.c:195
msgid "invalid caller"
msgstr ""
-#: elf/dl-load.c:1518
+#: elf/dl-load.c:1320 elf/dl-load.h:130
+msgid "cannot change memory protections"
+msgstr ""
+
+#: elf/dl-load.c:1340
msgid "cannot enable executable stack as shared object requires"
msgstr ""
-#: elf/dl-load.c:1531
+#: elf/dl-load.c:1353
msgid "cannot close file descriptor"
msgstr ""
-#: elf/dl-load.c:1761
+#: elf/dl-load.c:1583
msgid "file too short"
msgstr ""
-#: elf/dl-load.c:1797
+#: elf/dl-load.c:1618
msgid "invalid ELF header"
msgstr ""
-#: elf/dl-load.c:1809
+#: elf/dl-load.c:1630
msgid "ELF file data encoding not big-endian"
msgstr ""
-#: elf/dl-load.c:1811
+#: elf/dl-load.c:1632
msgid "ELF file data encoding not little-endian"
msgstr ""
-#: elf/dl-load.c:1815
+#: elf/dl-load.c:1636
msgid "ELF file version ident does not match current one"
msgstr ""
-#: elf/dl-load.c:1819
+#: elf/dl-load.c:1640
msgid "ELF file OS ABI invalid"
msgstr ""
-#: elf/dl-load.c:1822
+#: elf/dl-load.c:1643
msgid "ELF file ABI version invalid"
msgstr ""
-#: elf/dl-load.c:1825
+#: elf/dl-load.c:1646
msgid "nonzero padding in e_ident"
msgstr ""
-#: elf/dl-load.c:1828
+#: elf/dl-load.c:1649
msgid "internal error"
msgstr ""
-#: elf/dl-load.c:1835
+#: elf/dl-load.c:1656
msgid "ELF file version does not match current one"
msgstr ""
-#: elf/dl-load.c:1843
+#: elf/dl-load.c:1664
msgid "only ET_DYN and ET_EXEC can be loaded"
msgstr ""
-#: elf/dl-load.c:1849
+#: elf/dl-load.c:1680
msgid "ELF file's phentsize not the expected size"
msgstr ""
-#: elf/dl-load.c:2367
+#: elf/dl-load.c:2192
msgid "wrong ELF class: ELFCLASS64"
msgstr ""
-#: elf/dl-load.c:2368
+#: elf/dl-load.c:2193
msgid "wrong ELF class: ELFCLASS32"
msgstr ""
-#: elf/dl-load.c:2371
+#: elf/dl-load.c:2196
msgid "cannot open shared object file"
msgstr ""
-#: elf/dl-lookup.c:753 ports/sysdeps/mips/dl-lookup.c:770
+#: elf/dl-load.h:128
+msgid "failed to map segment from shared object"
+msgstr ""
+
+#: elf/dl-load.h:132
+msgid "cannot map zero-fill pages"
+msgstr ""
+
+#: elf/dl-lookup.c:788
msgid "relocation error"
msgstr ""
-#: elf/dl-lookup.c:780 ports/sysdeps/mips/dl-lookup.c:797
+#: elf/dl-lookup.c:815
msgid "symbol lookup error"
msgstr ""
@@ -642,41 +642,41 @@ msgstr ""
msgid "cannot load any more object with static TLS"
msgstr ""
-#: elf/dl-open.c:602
+#: elf/dl-open.c:599
msgid "invalid mode for dlopen()"
msgstr ""
-#: elf/dl-open.c:619
+#: elf/dl-open.c:616
msgid "no more namespaces available for dlmopen()"
msgstr ""
-#: elf/dl-open.c:637
+#: elf/dl-open.c:634
msgid "invalid target namespace in dlmopen()"
msgstr ""
-#: elf/dl-reloc.c:158
+#: elf/dl-reloc.c:120
msgid "cannot allocate memory in static TLS block"
msgstr ""
-#: elf/dl-reloc.c:250
+#: elf/dl-reloc.c:212
msgid "cannot make segment writable for relocation"
msgstr ""
-#: elf/dl-reloc.c:313
+#: elf/dl-reloc.c:275
#, c-format
msgid "%s: no PLTREL found in object %s\n"
msgstr ""
-#: elf/dl-reloc.c:324
+#: elf/dl-reloc.c:286
#, c-format
msgid "%s: out of memory to store relocation results for %s\n"
msgstr ""
-#: elf/dl-reloc.c:340
+#: elf/dl-reloc.c:302
msgid "cannot restore segment prot after reloc"
msgstr ""
-#: elf/dl-reloc.c:369
+#: elf/dl-reloc.c:331
msgid "cannot apply additional memory protection after relocation"
msgstr ""
@@ -684,7 +684,7 @@ msgstr ""
msgid "RTLD_NEXT used in code not dynamically loaded"
msgstr ""
-#: elf/dl-tls.c:923
+#: elf/dl-tls.c:903
msgid "cannot create TLS data structures"
msgstr ""
@@ -890,8 +890,8 @@ msgstr ""
msgid "need absolute file name for configuration file when using -r"
msgstr ""
-#: elf/ldconfig.c:1191 locale/programs/xmalloc.c:64 malloc/obstack.c:432
-#: malloc/obstack.c:434 posix/getconf.c:1076 posix/getconf.c:1296
+#: elf/ldconfig.c:1191 locale/programs/xmalloc.c:64 malloc/obstack.c:416
+#: malloc/obstack.c:418 posix/getconf.c:1076 posix/getconf.c:1296
#, c-format
msgid "memory exhausted"
msgstr ""
@@ -950,7 +950,7 @@ msgstr ""
#. TRANS No such file or directory. This is a ``file doesn't exist'' error
#. TRANS for ordinary files that are referenced in contexts where they are
#. TRANS expected to already exist.
-#: elf/ldd.bash.in:147 sysdeps/gnu/errlist.c:36
+#: elf/ldd.bash.in:147 sysdeps/gnu/errlist.c:37
msgid "No such file or directory"
msgstr ""
@@ -1009,55 +1009,55 @@ msgstr ""
msgid "cannot read object name"
msgstr ""
-#: elf/pldd.c:62
+#: elf/pldd.c:63
msgid "List dynamic shared objects loaded into process."
msgstr ""
-#: elf/pldd.c:66
+#: elf/pldd.c:67
msgid "PID"
msgstr ""
-#: elf/pldd.c:97
+#: elf/pldd.c:99
#, c-format
msgid "Exactly one parameter with process ID required.\n"
msgstr ""
-#: elf/pldd.c:109
+#: elf/pldd.c:111
#, c-format
msgid "invalid process ID '%s'"
msgstr ""
-#: elf/pldd.c:117
+#: elf/pldd.c:119
#, c-format
msgid "cannot open %s"
msgstr ""
-#: elf/pldd.c:142
+#: elf/pldd.c:144
#, c-format
msgid "cannot open %s/task"
msgstr ""
-#: elf/pldd.c:145
+#: elf/pldd.c:147
#, c-format
msgid "cannot prepare reading %s/task"
msgstr ""
-#: elf/pldd.c:158
+#: elf/pldd.c:160
#, c-format
msgid "invalid thread ID '%s'"
msgstr ""
-#: elf/pldd.c:169
+#: elf/pldd.c:171
#, c-format
msgid "cannot attach to process %lu"
msgstr ""
-#: elf/pldd.c:261
+#: elf/pldd.c:286
#, c-format
msgid "cannot get information about process %lu"
msgstr ""
-#: elf/pldd.c:274
+#: elf/pldd.c:299
#, c-format
msgid "process %lu is no ELF program"
msgstr ""
@@ -1154,7 +1154,7 @@ msgstr ""
msgid "Invalid link from \"%s\" to \"%s\": %s\n"
msgstr ""
-#: elf/sotruss.ksh:32
+#: elf/sotruss.sh:32
#, sh-format
msgid ""
"Usage: sotruss [OPTION...] [--] EXECUTABLE [EXECUTABLE-OPTION...]\n"
@@ -1172,25 +1172,25 @@ msgid ""
" --version Print program version"
msgstr ""
-#: elf/sotruss.ksh:46
+#: elf/sotruss.sh:46
msgid ""
"Mandatory arguments to long options are also mandatory for any corresponding"
"\\nshort options.\\n"
msgstr ""
-#: elf/sotruss.ksh:55
+#: elf/sotruss.sh:55
msgid "%s: option requires an argument -- '%s'\\n"
msgstr ""
-#: elf/sotruss.ksh:61
+#: elf/sotruss.sh:61
msgid "%s: option is ambiguous; possibilities:"
msgstr ""
-#: elf/sotruss.ksh:79
+#: elf/sotruss.sh:79
msgid "Written by %s.\\n"
msgstr ""
-#: elf/sotruss.ksh:86
+#: elf/sotruss.sh:86
msgid ""
"Usage: %s [-ef] [-F FROMLIST] [-o FILENAME] [-T TOLIST] [--exit]\n"
"\t [--follow] [--from FROMLIST] [--output FILENAME] [--to TOLIST]\n"
@@ -1198,7 +1198,7 @@ msgid ""
"\t EXECUTABLE [EXECUTABLE-OPTION...]\\n"
msgstr ""
-#: elf/sotruss.ksh:134
+#: elf/sotruss.sh:134
msgid "%s: unrecognized option '%c%s'\\n"
msgstr ""
@@ -3085,7 +3085,7 @@ msgstr ""
msgid "DATAFILE [OUTFILE]"
msgstr ""
-#: misc/error.c:117
+#: misc/error.c:192
msgid "Unknown system error"
msgstr ""
@@ -3094,7 +3094,7 @@ msgid "unable to free arguments"
msgstr ""
#: nis/nis_error.h:1 nis/ypclnt.c:831 nis/ypclnt.c:919 posix/regcomp.c:133
-#: sysdeps/gnu/errlist.c:20
+#: sysdeps/gnu/errlist.c:21
msgid "Success"
msgstr ""
@@ -3135,7 +3135,7 @@ msgid "First/next chain broken"
msgstr ""
#. TRANS Permission denied; the file permissions do not allow the attempted operation.
-#: nis/nis_error.h:11 nis/ypclnt.c:876 sysdeps/gnu/errlist.c:157
+#: nis/nis_error.h:11 nis/ypclnt.c:876 sysdeps/gnu/errlist.c:158
msgid "Permission denied"
msgstr ""
@@ -3722,12 +3722,12 @@ msgstr ""
msgid "yp_update: cannot get server address\n"
msgstr ""
-#: nscd/aicache.c:83 nscd/hstcache.c:494
+#: nscd/aicache.c:83 nscd/hstcache.c:485
#, c-format
msgid "Haven't found \"%s\" in hosts cache!"
msgstr ""
-#: nscd/aicache.c:85 nscd/hstcache.c:496
+#: nscd/aicache.c:85 nscd/hstcache.c:487
#, c-format
msgid "Reloading \"%s\" in hosts cache!"
msgstr ""
@@ -3741,7 +3741,7 @@ msgstr ""
msgid " (first)"
msgstr ""
-#: nscd/cache.c:285 nscd/connections.c:1019
+#: nscd/cache.c:285 nscd/connections.c:999
#, c-format
msgid "cannot stat() file `%s': %s"
msgstr ""
@@ -3756,246 +3756,243 @@ msgstr ""
msgid "considering %s entry \"%s\", timeout %<PRIu64>"
msgstr ""
-#: nscd/connections.c:571
+#: nscd/connections.c:552
#, c-format
msgid "invalid persistent database file \"%s\": %s"
msgstr ""
-#: nscd/connections.c:579
+#: nscd/connections.c:560
msgid "uninitialized header"
msgstr ""
-#: nscd/connections.c:584
+#: nscd/connections.c:565
msgid "header size does not match"
msgstr ""
-#: nscd/connections.c:594
+#: nscd/connections.c:575
msgid "file size does not match"
msgstr ""
-#: nscd/connections.c:611
+#: nscd/connections.c:592
msgid "verification failed"
msgstr ""
-#: nscd/connections.c:625
+#: nscd/connections.c:606
#, c-format
msgid ""
"suggested size of table for database %s larger than the persistent "
"database's table"
msgstr ""
-#: nscd/connections.c:636 nscd/connections.c:721
+#: nscd/connections.c:617 nscd/connections.c:701
#, c-format
msgid "cannot create read-only descriptor for \"%s\"; no mmap"
msgstr ""
-#: nscd/connections.c:652
+#: nscd/connections.c:633
#, c-format
msgid "cannot access '%s'"
msgstr ""
-#: nscd/connections.c:700
+#: nscd/connections.c:681
#, c-format
msgid ""
"database for %s corrupted or simultaneously used; remove %s manually if "
"necessary and restart"
msgstr ""
-#: nscd/connections.c:707
+#: nscd/connections.c:687
#, c-format
msgid "cannot create %s; no persistent database used"
msgstr ""
-#: nscd/connections.c:710
+#: nscd/connections.c:690
#, c-format
msgid "cannot create %s; no sharing possible"
msgstr ""
-#: nscd/connections.c:781
+#: nscd/connections.c:761
#, c-format
msgid "cannot write to database file %s: %s"
msgstr ""
-#: nscd/connections.c:820
+#: nscd/connections.c:800
#, c-format
msgid "cannot set socket to close on exec: %s; disabling paranoia mode"
msgstr ""
-#: nscd/connections.c:869
+#: nscd/connections.c:849
#, c-format
msgid "cannot open socket: %s"
msgstr ""
-#: nscd/connections.c:889 nscd/connections.c:953
+#: nscd/connections.c:869 nscd/connections.c:933
#, c-format
msgid "cannot change socket to nonblocking mode: %s"
msgstr ""
-#: nscd/connections.c:897 nscd/connections.c:963
+#: nscd/connections.c:877 nscd/connections.c:943
#, c-format
msgid "cannot set socket to close on exec: %s"
msgstr ""
-#: nscd/connections.c:910
+#: nscd/connections.c:890
#, c-format
msgid "cannot enable socket to accept connections: %s"
msgstr ""
-#: nscd/connections.c:1003
+#: nscd/connections.c:983
#, c-format
msgid "register trace file %s for database %s"
msgstr ""
-#: nscd/connections.c:1133
+#: nscd/connections.c:1113
#, c-format
msgid "provide access to FD %d, for %s"
msgstr ""
-#: nscd/connections.c:1145
+#: nscd/connections.c:1125
#, c-format
msgid "cannot handle old request version %d; current version is %d"
msgstr ""
-#: nscd/connections.c:1167
+#: nscd/connections.c:1147
#, c-format
msgid "request from %ld not handled due to missing permission"
msgstr ""
-#: nscd/connections.c:1172
+#: nscd/connections.c:1152
#, c-format
msgid "request from '%s' [%ld] not handled due to missing permission"
msgstr ""
-#: nscd/connections.c:1177
+#: nscd/connections.c:1157
msgid "request not handled due to missing permission"
msgstr ""
-#: nscd/connections.c:1215 nscd/connections.c:1268
+#: nscd/connections.c:1195 nscd/connections.c:1248
#, c-format
msgid "cannot write result: %s"
msgstr ""
-#: nscd/connections.c:1359
+#: nscd/connections.c:1339
#, c-format
msgid "error getting caller's id: %s"
msgstr ""
-#: nscd/connections.c:1419
+#: nscd/connections.c:1399
#, c-format
msgid "cannot open /proc/self/cmdline: %s; disabling paranoia mode"
msgstr ""
-#: nscd/connections.c:1433
+#: nscd/connections.c:1413
#, c-format
msgid "cannot read /proc/self/cmdline: %s; disabling paranoia mode"
msgstr ""
-#: nscd/connections.c:1473
+#: nscd/connections.c:1453
#, c-format
msgid "cannot change to old UID: %s; disabling paranoia mode"
msgstr ""
-#: nscd/connections.c:1483
+#: nscd/connections.c:1463
#, c-format
msgid "cannot change to old GID: %s; disabling paranoia mode"
msgstr ""
-#: nscd/connections.c:1496
+#: nscd/connections.c:1476
#, c-format
msgid "cannot change to old working directory: %s; disabling paranoia mode"
msgstr ""
-#: nscd/connections.c:1542
+#: nscd/connections.c:1522
#, c-format
msgid "re-exec failed: %s; disabling paranoia mode"
msgstr ""
-#: nscd/connections.c:1551
+#: nscd/connections.c:1531
#, c-format
msgid "cannot change current working directory to \"/\": %s"
msgstr ""
-#: nscd/connections.c:1744
+#: nscd/connections.c:1724
#, c-format
msgid "short read while reading request: %s"
msgstr ""
-#: nscd/connections.c:1777
+#: nscd/connections.c:1757
#, c-format
msgid "key length in request too long: %d"
msgstr ""
-#: nscd/connections.c:1790
+#: nscd/connections.c:1770
#, c-format
msgid "short read while reading request key: %s"
msgstr ""
-#: nscd/connections.c:1800
+#: nscd/connections.c:1780
#, c-format
msgid "handle_request: request received (Version = %d) from PID %ld"
msgstr ""
-#: nscd/connections.c:1805
+#: nscd/connections.c:1785
#, c-format
msgid "handle_request: request received (Version = %d)"
msgstr ""
-#: nscd/connections.c:2069 nscd/connections.c:2271
+#: nscd/connections.c:2049 nscd/connections.c:2251
#, c-format
msgid "disabled inotify after read error %d"
msgstr ""
-#: nscd/connections.c:2394
+#: nscd/connections.c:2374
msgid "could not initialize conditional variable"
msgstr ""
-#: nscd/connections.c:2402
+#: nscd/connections.c:2382
msgid "could not start clean-up thread; terminating"
msgstr ""
-#: nscd/connections.c:2416
+#: nscd/connections.c:2396
msgid "could not start any worker thread; terminating"
msgstr ""
-#: nscd/connections.c:2467 nscd/connections.c:2468 nscd/connections.c:2485
-#: nscd/connections.c:2494 nscd/connections.c:2512 nscd/connections.c:2523
-#: nscd/connections.c:2534
+#: nscd/connections.c:2451 nscd/connections.c:2453 nscd/connections.c:2469
+#: nscd/connections.c:2479 nscd/connections.c:2497 nscd/connections.c:2508
+#: nscd/connections.c:2518
#, c-format
msgid "Failed to run nscd as user '%s'"
msgstr ""
-#: nscd/connections.c:2486
-#, c-format
+#: nscd/connections.c:2471
msgid "initial getgrouplist failed"
msgstr ""
-#: nscd/connections.c:2495
-#, c-format
+#: nscd/connections.c:2480
msgid "getgrouplist failed"
msgstr ""
-#: nscd/connections.c:2513
-#, c-format
+#: nscd/connections.c:2498
msgid "setgroups failed"
msgstr ""
-#: nscd/grpcache.c:413 nscd/hstcache.c:441 nscd/initgrcache.c:418
-#: nscd/pwdcache.c:391 nscd/servicescache.c:346
+#: nscd/grpcache.c:405 nscd/hstcache.c:432 nscd/initgrcache.c:410
+#: nscd/pwdcache.c:383 nscd/servicescache.c:338
#, c-format
msgid "short write in %s: %s"
msgstr ""
-#: nscd/grpcache.c:458 nscd/initgrcache.c:77
+#: nscd/grpcache.c:450 nscd/initgrcache.c:77
#, c-format
msgid "Haven't found \"%s\" in group cache!"
msgstr ""
-#: nscd/grpcache.c:460 nscd/initgrcache.c:79
+#: nscd/grpcache.c:452 nscd/initgrcache.c:79
#, c-format
msgid "Reloading \"%s\" in group cache!"
msgstr ""
-#: nscd/grpcache.c:539
+#: nscd/grpcache.c:531
#, c-format
msgid "Invalid numeric gid \"%s\"!"
msgstr ""
@@ -4010,134 +4007,138 @@ msgstr ""
msgid "no more memory for database '%s'"
msgstr ""
-#: nscd/netgroupcache.c:126
+#: nscd/netgroupcache.c:120
#, c-format
msgid "Haven't found \"%s\" in netgroup cache!"
msgstr ""
-#: nscd/netgroupcache.c:128
+#: nscd/netgroupcache.c:122
#, c-format
msgid "Reloading \"%s\" in netgroup cache!"
msgstr ""
-#: nscd/netgroupcache.c:509
+#: nscd/netgroupcache.c:497
#, c-format
msgid "Haven't found \"%s (%s,%s,%s)\" in netgroup cache!"
msgstr ""
-#: nscd/netgroupcache.c:512
+#: nscd/netgroupcache.c:500
#, c-format
msgid "Reloading \"%s (%s,%s,%s)\" in netgroup cache!"
msgstr ""
-#: nscd/nscd.c:116
+#: nscd/nscd.c:106
msgid "Read configuration data from NAME"
msgstr ""
-#: nscd/nscd.c:118
+#: nscd/nscd.c:108
msgid "Do not fork and display messages on the current tty"
msgstr ""
-#: nscd/nscd.c:120
+#: nscd/nscd.c:110
msgid "Do not fork, but otherwise behave like a daemon"
msgstr ""
-#: nscd/nscd.c:121
+#: nscd/nscd.c:111
msgid "NUMBER"
msgstr ""
-#: nscd/nscd.c:121
+#: nscd/nscd.c:111
msgid "Start NUMBER threads"
msgstr ""
-#: nscd/nscd.c:122
+#: nscd/nscd.c:112
msgid "Shut the server down"
msgstr ""
-#: nscd/nscd.c:123
+#: nscd/nscd.c:113
msgid "Print current configuration statistics"
msgstr ""
-#: nscd/nscd.c:124
+#: nscd/nscd.c:114
msgid "TABLE"
msgstr ""
-#: nscd/nscd.c:125
+#: nscd/nscd.c:115
msgid "Invalidate the specified cache"
msgstr ""
-#: nscd/nscd.c:126
+#: nscd/nscd.c:116
msgid "TABLE,yes"
msgstr ""
-#: nscd/nscd.c:127
+#: nscd/nscd.c:117
msgid "Use separate cache for each user"
msgstr ""
-#: nscd/nscd.c:132
+#: nscd/nscd.c:122
msgid "Name Service Cache Daemon."
msgstr ""
-#: nscd/nscd.c:164 nss/getent.c:1003 nss/makedb.c:206
+#: nscd/nscd.c:155 nss/getent.c:1003 nss/makedb.c:206
#, c-format
msgid "wrong number of arguments"
msgstr ""
-#: nscd/nscd.c:174
+#: nscd/nscd.c:165
#, c-format
msgid "failure while reading configuration file; this is fatal"
msgstr ""
-#: nscd/nscd.c:183
+#: nscd/nscd.c:174
#, c-format
msgid "already running"
msgstr ""
-#: nscd/nscd.c:201
+#: nscd/nscd.c:194
#, c-format
-msgid "cannot fork"
+msgid "cannot create a pipe to talk to the child"
msgstr ""
-#: nscd/nscd.c:259
+#: nscd/nscd.c:198
#, c-format
+msgid "cannot fork"
+msgstr ""
+
+#: nscd/nscd.c:268
msgid "cannot change current working directory to \"/\""
msgstr ""
-#: nscd/nscd.c:267
+#: nscd/nscd.c:276
msgid "Could not create log file"
msgstr ""
-#: nscd/nscd.c:339 nscd/nscd.c:364 nscd/nscd_stat.c:173
+#: nscd/nscd.c:348 nscd/nscd.c:373 nscd/nscd_stat.c:173
#, c-format
msgid "Only root is allowed to use this option!"
msgstr ""
-#: nscd/nscd.c:379
+#: nscd/nscd.c:388
#, c-format
msgid "'%s' is not a known database"
msgstr ""
-#: nscd/nscd.c:404 nscd/nscd_stat.c:192
+#: nscd/nscd.c:413 nscd/nscd_stat.c:192
#, c-format
msgid "write incomplete"
msgstr ""
-#: nscd/nscd.c:415
+#: nscd/nscd.c:424
#, c-format
msgid "cannot read invalidate ACK"
msgstr ""
-#: nscd/nscd.c:421
+#: nscd/nscd.c:430
#, c-format
msgid "invalidation failed"
msgstr ""
-#: nscd/nscd.c:431
+#: nscd/nscd.c:440
#, c-format
msgid "secure services not implemented anymore"
msgstr ""
-#: nscd/nscd.c:462
+#: nscd/nscd.c:471
#, c-format
msgid ""
"Supported tables:\n"
@@ -4147,6 +4148,21 @@ msgid ""
"%s.\n"
msgstr ""
+#: nscd/nscd.c:620
+#, c-format
+msgid "'wait' failed\n"
+msgstr ""
+
+#: nscd/nscd.c:627
+#, c-format
+msgid "child exited with status %d\n"
+msgstr ""
+
+#: nscd/nscd.c:632
+#, c-format
+msgid "child terminated by signal %d\n"
+msgstr ""
+
#: nscd/nscd_conf.c:57
#, c-format
msgid "database %s is not supported"
@@ -4282,97 +4298,100 @@ msgid ""
"%15s check /etc/%s for changes\n"
msgstr ""
-#: nscd/pwdcache.c:436
+#: nscd/pwdcache.c:428
#, c-format
msgid "Haven't found \"%s\" in password cache!"
msgstr ""
-#: nscd/pwdcache.c:438
+#: nscd/pwdcache.c:430
#, c-format
msgid "Reloading \"%s\" in password cache!"
msgstr ""
-#: nscd/pwdcache.c:519
+#: nscd/pwdcache.c:511
#, c-format
msgid "Invalid numeric uid \"%s\"!"
msgstr ""
-#: nscd/selinux.c:160
+#: nscd/selinux.c:155
#, c-format
msgid "Failed opening connection to the audit subsystem: %m"
msgstr ""
-#: nscd/selinux.c:181
+#: nscd/selinux.c:176
msgid "Failed to set keep-capabilities"
msgstr ""
-#: nscd/selinux.c:182 nscd/selinux.c:245
-#, c-format
+#: nscd/selinux.c:177 nscd/selinux.c:240
msgid "prctl(KEEPCAPS) failed"
msgstr ""
-#: nscd/selinux.c:196
+#: nscd/selinux.c:191
msgid "Failed to initialize drop of capabilities"
msgstr ""
-#: nscd/selinux.c:197
-#, c-format
+#: nscd/selinux.c:192
msgid "cap_init failed"
msgstr ""
-#: nscd/selinux.c:218 nscd/selinux.c:235
+#: nscd/selinux.c:213 nscd/selinux.c:230
msgid "Failed to drop capabilities"
msgstr ""
-#: nscd/selinux.c:219 nscd/selinux.c:236
-#, c-format
+#: nscd/selinux.c:214 nscd/selinux.c:231
msgid "cap_set_proc failed"
msgstr ""
-#: nscd/selinux.c:244
+#: nscd/selinux.c:239
msgid "Failed to unset keep-capabilities"
msgstr ""
-#: nscd/selinux.c:260
+#: nscd/selinux.c:255
msgid "Failed to determine if kernel supports SELinux"
msgstr ""
-#: nscd/selinux.c:275
-#, c-format
+#: nscd/selinux.c:270
msgid "Failed to start AVC thread"
msgstr ""
-#: nscd/selinux.c:297
-#, c-format
+#: nscd/selinux.c:292
msgid "Failed to create AVC lock"
msgstr ""
-#: nscd/selinux.c:337
-#, c-format
+#: nscd/selinux.c:332
msgid "Failed to start AVC"
msgstr ""
-#: nscd/selinux.c:339
+#: nscd/selinux.c:334
msgid "Access Vector Cache (AVC) started"
msgstr ""
-#: nscd/selinux.c:360
+#: nscd/selinux.c:369
+msgid "Error querying policy for undefined object classes or permissions."
+msgstr ""
+
+#: nscd/selinux.c:376
+msgid "Error getting security class for nscd."
+msgstr ""
+
+#: nscd/selinux.c:381
+#, c-format
+msgid "Error translating permission name \"%s\" to access vector bit."
+msgstr ""
+
+#: nscd/selinux.c:391
msgid "Error getting context of socket peer"
msgstr ""
-#: nscd/selinux.c:365
+#: nscd/selinux.c:396
msgid "Error getting context of nscd"
msgstr ""
-#: nscd/selinux.c:371
+#: nscd/selinux.c:402
msgid "Error getting sid from context"
msgstr ""
-#: nscd/selinux.c:378
-msgid "compile-time support for database policy missing"
-msgstr ""
-
-#: nscd/selinux.c:411
+#: nscd/selinux.c:440
#, c-format
msgid ""
"\n"
@@ -4388,12 +4407,12 @@ msgid ""
"%15u CAV misses\n"
msgstr ""
-#: nscd/servicescache.c:395
+#: nscd/servicescache.c:387
#, c-format
msgid "Haven't found \"%s\" in services cache!"
msgstr ""
-#: nscd/servicescache.c:397
+#: nscd/servicescache.c:389
#, c-format
msgid "Reloading \"%s\" in services cache!"
msgstr ""
@@ -4537,11 +4556,6 @@ msgstr ""
msgid "cannot set file creation context for `%s'"
msgstr ""
-#: ports/sysdeps/unix/sysv/linux/ia64/makecontext.c:58
-#, c-format
-msgid "makecontext: does not know how to handle more than 8 arguments\n"
-msgstr ""
-
#: posix/getconf.c:1035
#, c-format
msgid "Usage: %s [-v specification] variable_name [pathname]\n"
@@ -4976,7 +4990,7 @@ msgstr ""
#: sunrpc/auth_unix.c:111 sunrpc/clnt_tcp.c:123 sunrpc/clnt_udp.c:135
#: sunrpc/clnt_unix.c:124 sunrpc/svc_tcp.c:188 sunrpc/svc_tcp.c:233
#: sunrpc/svc_udp.c:162 sunrpc/svc_unix.c:188 sunrpc/svc_unix.c:229
-#: sunrpc/xdr.c:631 sunrpc/xdr.c:791 sunrpc/xdr_array.c:97
+#: sunrpc/xdr.c:631 sunrpc/xdr.c:793 sunrpc/xdr_array.c:97
#: sunrpc/xdr_rec.c:152 sunrpc/xdr_ref.c:76
msgid "out of memory\n"
msgstr ""
@@ -5631,7 +5645,7 @@ msgstr ""
#. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled
#. TRANS or blocked. Thus, your program will never actually see @code{EPIPE}
#. TRANS unless it has handled or blocked @code{SIGPIPE}.
-#: sysdeps/generic/siglist.h:38 sysdeps/gnu/errlist.c:359
+#: sysdeps/generic/siglist.h:38 sysdeps/gnu/errlist.c:360
msgid "Broken pipe"
msgstr ""
@@ -5729,12 +5743,12 @@ msgstr ""
#. TRANS Operation not permitted; only the owner of the file (or other resource)
#. TRANS or processes with special privileges can perform the operation.
-#: sysdeps/gnu/errlist.c:25
+#: sysdeps/gnu/errlist.c:26
msgid "Operation not permitted"
msgstr ""
#. TRANS No process matches the specified process ID.
-#: sysdeps/gnu/errlist.c:45
+#: sysdeps/gnu/errlist.c:46
msgid "No such process"
msgstr ""
@@ -5745,12 +5759,12 @@ msgstr ""
#. TRANS You can choose to have functions resume after a signal that is handled,
#. TRANS rather than failing with @code{EINTR}; see @ref{Interrupted
#. TRANS Primitives}.
-#: sysdeps/gnu/errlist.c:60
+#: sysdeps/gnu/errlist.c:61
msgid "Interrupted system call"
msgstr ""
#. TRANS Input/output error; usually used for physical read or write errors.
-#: sysdeps/gnu/errlist.c:69
+#: sysdeps/gnu/errlist.c:70
msgid "Input/output error"
msgstr ""
@@ -5759,7 +5773,7 @@ msgstr ""
#. TRANS This can mean that the device file was installed incorrectly, or that
#. TRANS the physical device is missing or not correctly attached to the
#. TRANS computer.
-#: sysdeps/gnu/errlist.c:82
+#: sysdeps/gnu/errlist.c:83
msgid "No such device or address"
msgstr ""
@@ -5767,27 +5781,27 @@ msgstr ""
#. TRANS being executed with one of the @code{exec} functions (@pxref{Executing a
#. TRANS File}) occupy too much memory space. This condition never arises on
#. TRANS @gnuhurdsystems{}.
-#: sysdeps/gnu/errlist.c:94
+#: sysdeps/gnu/errlist.c:95
msgid "Argument list too long"
msgstr ""
#. TRANS Invalid executable file format. This condition is detected by the
#. TRANS @code{exec} functions; see @ref{Executing a File}.
-#: sysdeps/gnu/errlist.c:104
+#: sysdeps/gnu/errlist.c:105
msgid "Exec format error"
msgstr ""
#. TRANS Bad file descriptor; for example, I/O on a descriptor that has been
#. TRANS closed or reading from a descriptor open only for writing (or vice
#. TRANS versa).
-#: sysdeps/gnu/errlist.c:115
+#: sysdeps/gnu/errlist.c:116
msgid "Bad file descriptor"
msgstr ""
#. TRANS There are no child processes. This error happens on operations that are
#. TRANS supposed to manipulate child processes, when there aren't any processes
#. TRANS to manipulate.
-#: sysdeps/gnu/errlist.c:126
+#: sysdeps/gnu/errlist.c:127
msgid "No child processes"
msgstr ""
@@ -5795,69 +5809,69 @@ msgstr ""
#. TRANS deadlock situation. The system does not guarantee that it will notice
#. TRANS all such situations. This error means you got lucky and the system
#. TRANS noticed; it might just hang. @xref{File Locks}, for an example.
-#: sysdeps/gnu/errlist.c:138
+#: sysdeps/gnu/errlist.c:139
msgid "Resource deadlock avoided"
msgstr ""
#. TRANS No memory available. The system cannot allocate more virtual memory
#. TRANS because its capacity is full.
-#: sysdeps/gnu/errlist.c:148
+#: sysdeps/gnu/errlist.c:149
msgid "Cannot allocate memory"
msgstr ""
#. TRANS Bad address; an invalid pointer was detected.
#. TRANS On @gnuhurdsystems{}, this error never happens; you get a signal instead.
-#: sysdeps/gnu/errlist.c:167
+#: sysdeps/gnu/errlist.c:168
msgid "Bad address"
msgstr ""
#. TRANS A file that isn't a block special file was given in a situation that
#. TRANS requires one. For example, trying to mount an ordinary file as a file
#. TRANS system in Unix gives this error.
-#: sysdeps/gnu/errlist.c:178
+#: sysdeps/gnu/errlist.c:179
msgid "Block device required"
msgstr ""
#. TRANS Resource busy; a system resource that can't be shared is already in use.
#. TRANS For example, if you try to delete a file that is the root of a currently
#. TRANS mounted filesystem, you get this error.
-#: sysdeps/gnu/errlist.c:189
+#: sysdeps/gnu/errlist.c:190
msgid "Device or resource busy"
msgstr ""
#. TRANS File exists; an existing file was specified in a context where it only
#. TRANS makes sense to specify a new file.
-#: sysdeps/gnu/errlist.c:199
+#: sysdeps/gnu/errlist.c:200
msgid "File exists"
msgstr ""
#. TRANS An attempt to make an improper link across file systems was detected.
#. TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but
#. TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}).
-#: sysdeps/gnu/errlist.c:210
+#: sysdeps/gnu/errlist.c:211
msgid "Invalid cross-device link"
msgstr ""
#. TRANS The wrong type of device was given to a function that expects a
#. TRANS particular sort of device.
-#: sysdeps/gnu/errlist.c:220
+#: sysdeps/gnu/errlist.c:221
msgid "No such device"
msgstr ""
#. TRANS A file that isn't a directory was specified when a directory is required.
-#: sysdeps/gnu/errlist.c:229
+#: sysdeps/gnu/errlist.c:230
msgid "Not a directory"
msgstr ""
#. TRANS File is a directory; you cannot open a directory for writing,
#. TRANS or create or remove hard links to it.
-#: sysdeps/gnu/errlist.c:239
+#: sysdeps/gnu/errlist.c:240
msgid "Is a directory"
msgstr ""
#. TRANS Invalid argument. This is used to indicate various kinds of problems
#. TRANS with passing the wrong argument to a library function.
-#: sysdeps/gnu/errlist.c:249
+#: sysdeps/gnu/errlist.c:250
msgid "Invalid argument"
msgstr ""
@@ -5868,20 +5882,20 @@ msgstr ""
#. TRANS limit that can usually be increased. If you get this error, you might
#. TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited;
#. TRANS @pxref{Limits on Resources}.
-#: sysdeps/gnu/errlist.c:264
+#: sysdeps/gnu/errlist.c:265
msgid "Too many open files"
msgstr ""
#. TRANS There are too many distinct file openings in the entire system. Note
#. TRANS that any number of linked channels count as just one file opening; see
#. TRANS @ref{Linked Channels}. This error never occurs on @gnuhurdsystems{}.
-#: sysdeps/gnu/errlist.c:275
+#: sysdeps/gnu/errlist.c:276
msgid "Too many open files in system"
msgstr ""
#. TRANS Inappropriate I/O control operation, such as trying to set terminal
#. TRANS modes on an ordinary file.
-#: sysdeps/gnu/errlist.c:285
+#: sysdeps/gnu/errlist.c:286
msgid "Inappropriate ioctl for device"
msgstr ""
@@ -5890,47 +5904,47 @@ msgstr ""
#. TRANS debugger to run a program is considered having it open for writing and
#. TRANS will cause this error. (The name stands for ``text file busy''.) This
#. TRANS is not an error on @gnuhurdsystems{}; the text is copied as necessary.
-#: sysdeps/gnu/errlist.c:298
+#: sysdeps/gnu/errlist.c:299
msgid "Text file busy"
msgstr ""
#. TRANS File too big; the size of a file would be larger than allowed by the system.
-#: sysdeps/gnu/errlist.c:307
+#: sysdeps/gnu/errlist.c:308
msgid "File too large"
msgstr ""
#. TRANS No space left on device; write operation on a file failed because the
#. TRANS disk is full.
-#: sysdeps/gnu/errlist.c:317
+#: sysdeps/gnu/errlist.c:318
msgid "No space left on device"
msgstr ""
#. TRANS Invalid seek operation (such as on a pipe).
-#: sysdeps/gnu/errlist.c:326
+#: sysdeps/gnu/errlist.c:327
msgid "Illegal seek"
msgstr ""
#. TRANS An attempt was made to modify something on a read-only file system.
-#: sysdeps/gnu/errlist.c:335
+#: sysdeps/gnu/errlist.c:336
msgid "Read-only file system"
msgstr ""
#. TRANS Too many links; the link count of a single file would become too large.
#. TRANS @code{rename} can cause this error if the file being renamed already has
#. TRANS as many links as it can take (@pxref{Renaming Files}).
-#: sysdeps/gnu/errlist.c:346
+#: sysdeps/gnu/errlist.c:347
msgid "Too many links"
msgstr ""
#. TRANS Domain error; used by mathematical functions when an argument value does
#. TRANS not fall into the domain over which the function is defined.
-#: sysdeps/gnu/errlist.c:369
+#: sysdeps/gnu/errlist.c:370
msgid "Numerical argument out of domain"
msgstr ""
#. TRANS Range error; used by mathematical functions when the result value is
#. TRANS not representable because of overflow or underflow.
-#: sysdeps/gnu/errlist.c:379
+#: sysdeps/gnu/errlist.c:380
msgid "Numerical result out of range"
msgstr ""
@@ -5963,7 +5977,7 @@ msgstr ""
#. TRANS so usually an interactive program should report the error to the user
#. TRANS and return to its command loop.
#. TRANS @end itemize
-#: sysdeps/gnu/errlist.c:416
+#: sysdeps/gnu/errlist.c:417
msgid "Resource temporarily unavailable"
msgstr ""
@@ -5972,7 +5986,7 @@ msgstr ""
#. TRANS
#. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a
#. TRANS separate error code.
-#: sysdeps/gnu/errlist.c:429
+#: sysdeps/gnu/errlist.c:430
msgid "Operation would block"
msgstr ""
@@ -5984,47 +5998,47 @@ msgstr ""
#. TRANS the object before the call completes return @code{EALREADY}. You can
#. TRANS use the @code{select} function to find out when the pending operation
#. TRANS has completed; @pxref{Waiting for I/O}.
-#: sysdeps/gnu/errlist.c:445
+#: sysdeps/gnu/errlist.c:446
msgid "Operation now in progress"
msgstr ""
#. TRANS An operation is already in progress on an object that has non-blocking
#. TRANS mode selected.
-#: sysdeps/gnu/errlist.c:455
+#: sysdeps/gnu/errlist.c:456
msgid "Operation already in progress"
msgstr ""
#. TRANS A file that isn't a socket was specified when a socket is required.
-#: sysdeps/gnu/errlist.c:464
+#: sysdeps/gnu/errlist.c:465
msgid "Socket operation on non-socket"
msgstr ""
#. TRANS The size of a message sent on a socket was larger than the supported
#. TRANS maximum size.
-#: sysdeps/gnu/errlist.c:474
+#: sysdeps/gnu/errlist.c:475
msgid "Message too long"
msgstr ""
#. TRANS The socket type does not support the requested communications protocol.
-#: sysdeps/gnu/errlist.c:483
+#: sysdeps/gnu/errlist.c:484
msgid "Protocol wrong type for socket"
msgstr ""
#. TRANS You specified a socket option that doesn't make sense for the
#. TRANS particular protocol being used by the socket. @xref{Socket Options}.
-#: sysdeps/gnu/errlist.c:493
+#: sysdeps/gnu/errlist.c:494
msgid "Protocol not available"
msgstr ""
#. TRANS The socket domain does not support the requested communications protocol
#. TRANS (perhaps because the requested protocol is completely invalid).
#. TRANS @xref{Creating a Socket}.
-#: sysdeps/gnu/errlist.c:504
+#: sysdeps/gnu/errlist.c:505
msgid "Protocol not supported"
msgstr ""
#. TRANS The socket type is not supported.
-#: sysdeps/gnu/errlist.c:513
+#: sysdeps/gnu/errlist.c:514
msgid "Socket type not supported"
msgstr ""
@@ -6034,71 +6048,71 @@ msgstr ""
#. TRANS error can happen for many calls when the object does not support the
#. TRANS particular operation; it is a generic indication that the server knows
#. TRANS nothing to do for that call.
-#: sysdeps/gnu/errlist.c:527
+#: sysdeps/gnu/errlist.c:528
msgid "Operation not supported"
msgstr ""
#. TRANS The socket communications protocol family you requested is not supported.
-#: sysdeps/gnu/errlist.c:536
+#: sysdeps/gnu/errlist.c:537
msgid "Protocol family not supported"
msgstr ""
#. TRANS The address family specified for a socket is not supported; it is
#. TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}.
-#: sysdeps/gnu/errlist.c:546
+#: sysdeps/gnu/errlist.c:547
msgid "Address family not supported by protocol"
msgstr ""
#. TRANS The requested socket address is already in use. @xref{Socket Addresses}.
-#: sysdeps/gnu/errlist.c:555
+#: sysdeps/gnu/errlist.c:556
msgid "Address already in use"
msgstr ""
#. TRANS The requested socket address is not available; for example, you tried
#. TRANS to give a socket a name that doesn't match the local host name.
#. TRANS @xref{Socket Addresses}.
-#: sysdeps/gnu/errlist.c:566
+#: sysdeps/gnu/errlist.c:567
msgid "Cannot assign requested address"
msgstr ""
#. TRANS A socket operation failed because the network was down.
-#: sysdeps/gnu/errlist.c:575
+#: sysdeps/gnu/errlist.c:576
msgid "Network is down"
msgstr ""
#. TRANS A socket operation failed because the subnet containing the remote host
#. TRANS was unreachable.
-#: sysdeps/gnu/errlist.c:585
+#: sysdeps/gnu/errlist.c:586
msgid "Network is unreachable"
msgstr ""
#. TRANS A network connection was reset because the remote host crashed.
-#: sysdeps/gnu/errlist.c:594
+#: sysdeps/gnu/errlist.c:595
msgid "Network dropped connection on reset"
msgstr ""
#. TRANS A network connection was aborted locally.
-#: sysdeps/gnu/errlist.c:603
+#: sysdeps/gnu/errlist.c:604
msgid "Software caused connection abort"
msgstr ""
#. TRANS A network connection was closed for reasons outside the control of the
#. TRANS local host, such as by the remote machine rebooting or an unrecoverable
#. TRANS protocol violation.
-#: sysdeps/gnu/errlist.c:614
+#: sysdeps/gnu/errlist.c:615
msgid "Connection reset by peer"
msgstr ""
#. TRANS The kernel's buffers for I/O operations are all in use. In GNU, this
#. TRANS error is always synonymous with @code{ENOMEM}; you may get one or the
#. TRANS other from network operations.
-#: sysdeps/gnu/errlist.c:625
+#: sysdeps/gnu/errlist.c:626
msgid "No buffer space available"
msgstr ""
#. TRANS You tried to connect a socket that is already connected.
#. TRANS @xref{Connecting}.
-#: sysdeps/gnu/errlist.c:635
+#: sysdeps/gnu/errlist.c:636
msgid "Transport endpoint is already connected"
msgstr ""
@@ -6106,83 +6120,83 @@ msgstr ""
#. TRANS try to transmit data over a socket, without first specifying a
#. TRANS destination for the data. For a connectionless socket (for datagram
#. TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead.
-#: sysdeps/gnu/errlist.c:647
+#: sysdeps/gnu/errlist.c:648
msgid "Transport endpoint is not connected"
msgstr ""
#. TRANS No default destination address was set for the socket. You get this
#. TRANS error when you try to transmit data over a connectionless socket,
#. TRANS without first specifying a destination for the data with @code{connect}.
-#: sysdeps/gnu/errlist.c:658
+#: sysdeps/gnu/errlist.c:659
msgid "Destination address required"
msgstr ""
#. TRANS The socket has already been shut down.
-#: sysdeps/gnu/errlist.c:667
+#: sysdeps/gnu/errlist.c:668
msgid "Cannot send after transport endpoint shutdown"
msgstr ""
#. TRANS ???
-#: sysdeps/gnu/errlist.c:676
+#: sysdeps/gnu/errlist.c:677
msgid "Too many references: cannot splice"
msgstr ""
#. TRANS A socket operation with a specified timeout received no response during
#. TRANS the timeout period.
-#: sysdeps/gnu/errlist.c:686
+#: sysdeps/gnu/errlist.c:687
msgid "Connection timed out"
msgstr ""
#. TRANS A remote host refused to allow the network connection (typically because
#. TRANS it is not running the requested service).
-#: sysdeps/gnu/errlist.c:696
+#: sysdeps/gnu/errlist.c:697
msgid "Connection refused"
msgstr ""
#. TRANS Too many levels of symbolic links were encountered in looking up a file name.
#. TRANS This often indicates a cycle of symbolic links.
-#: sysdeps/gnu/errlist.c:706
+#: sysdeps/gnu/errlist.c:707
msgid "Too many levels of symbolic links"
msgstr ""
#. TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for
#. TRANS Files}) or host name too long (in @code{gethostname} or
#. TRANS @code{sethostname}; @pxref{Host Identification}).
-#: sysdeps/gnu/errlist.c:717
+#: sysdeps/gnu/errlist.c:718
msgid "File name too long"
msgstr ""
#. TRANS The remote host for a requested network connection is down.
-#: sysdeps/gnu/errlist.c:726
+#: sysdeps/gnu/errlist.c:727
msgid "Host is down"
msgstr ""
#. TRANS The remote host for a requested network connection is not reachable.
-#: sysdeps/gnu/errlist.c:735
+#: sysdeps/gnu/errlist.c:736
msgid "No route to host"
msgstr ""
#. TRANS Directory not empty, where an empty directory was expected. Typically,
#. TRANS this error occurs when you are trying to delete a directory.
-#: sysdeps/gnu/errlist.c:745
+#: sysdeps/gnu/errlist.c:746
msgid "Directory not empty"
msgstr ""
#. TRANS This means that the per-user limit on new process would be exceeded by
#. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on
#. TRANS the @code{RLIMIT_NPROC} limit.
-#: sysdeps/gnu/errlist.c:756
+#: sysdeps/gnu/errlist.c:757
msgid "Too many processes"
msgstr ""
#. TRANS The file quota system is confused because there are too many users.
#. TRANS @c This can probably happen in a GNU system when using NFS.
-#: sysdeps/gnu/errlist.c:766
+#: sysdeps/gnu/errlist.c:767
msgid "Too many users"
msgstr ""
#. TRANS The user's disk quota was exceeded.
-#: sysdeps/gnu/errlist.c:775
+#: sysdeps/gnu/errlist.c:776
msgid "Disk quota exceeded"
msgstr ""
@@ -6191,7 +6205,7 @@ msgstr ""
#. TRANS for NFS file systems or corruption in other file systems.
#. TRANS Repairing this condition usually requires unmounting, possibly repairing
#. TRANS and remounting the file system.
-#: sysdeps/gnu/errlist.c:788
+#: sysdeps/gnu/errlist.c:789
msgid "Stale file handle"
msgstr ""
@@ -6199,32 +6213,32 @@ msgstr ""
#. TRANS already specifies an NFS-mounted file.
#. TRANS (This is an error on some operating systems, but we expect it to work
#. TRANS properly on @gnuhurdsystems{}, making this error code impossible.)
-#: sysdeps/gnu/errlist.c:800
+#: sysdeps/gnu/errlist.c:801
msgid "Object is remote"
msgstr ""
#. TRANS ???
-#: sysdeps/gnu/errlist.c:809
+#: sysdeps/gnu/errlist.c:810
msgid "RPC struct is bad"
msgstr ""
#. TRANS ???
-#: sysdeps/gnu/errlist.c:818
+#: sysdeps/gnu/errlist.c:819
msgid "RPC version wrong"
msgstr ""
#. TRANS ???
-#: sysdeps/gnu/errlist.c:827
+#: sysdeps/gnu/errlist.c:828
msgid "RPC program not available"
msgstr ""
#. TRANS ???
-#: sysdeps/gnu/errlist.c:836
+#: sysdeps/gnu/errlist.c:837
msgid "RPC program version wrong"
msgstr ""
#. TRANS ???
-#: sysdeps/gnu/errlist.c:845
+#: sysdeps/gnu/errlist.c:846
msgid "RPC bad procedure for program"
msgstr ""
@@ -6232,7 +6246,7 @@ msgstr ""
#. TRANS @ref{File Locks}. This error is never generated by @gnuhurdsystems{}, but
#. TRANS it can result from an operation to an NFS server running another
#. TRANS operating system.
-#: sysdeps/gnu/errlist.c:857
+#: sysdeps/gnu/errlist.c:858
msgid "No locks available"
msgstr ""
@@ -6241,17 +6255,17 @@ msgstr ""
#. TRANS
#. TRANS On some systems @code{chmod} returns this error if you try to set the
#. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}.
-#: sysdeps/gnu/errlist.c:870
+#: sysdeps/gnu/errlist.c:871
msgid "Inappropriate file type or format"
msgstr ""
#. TRANS ???
-#: sysdeps/gnu/errlist.c:879
+#: sysdeps/gnu/errlist.c:880
msgid "Authentication error"
msgstr ""
#. TRANS ???
-#: sysdeps/gnu/errlist.c:888
+#: sysdeps/gnu/errlist.c:889
msgid "Need authenticator"
msgstr ""
@@ -6260,7 +6274,7 @@ msgstr ""
#. TRANS operating system. When you get this error, you can be sure that this
#. TRANS particular function will always fail with @code{ENOSYS} unless you
#. TRANS install a new version of the C library or the operating system.
-#: sysdeps/gnu/errlist.c:901
+#: sysdeps/gnu/errlist.c:902
msgid "Function not implemented"
msgstr ""
@@ -6276,13 +6290,13 @@ msgstr ""
#. TRANS
#. TRANS If the entire function is not available at all in the implementation,
#. TRANS it returns @code{ENOSYS} instead.
-#: sysdeps/gnu/errlist.c:921
+#: sysdeps/gnu/errlist.c:922
msgid "Not supported"
msgstr ""
#. TRANS While decoding a multibyte character the function came along an invalid
#. TRANS or an incomplete sequence of bytes or the given wide character is invalid.
-#: sysdeps/gnu/errlist.c:931
+#: sysdeps/gnu/errlist.c:932
msgid "Invalid or incomplete multibyte or wide character"
msgstr ""
@@ -6292,80 +6306,80 @@ msgstr ""
#. TRANS error because functions such as @code{read} and @code{write} translate
#. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control},
#. TRANS for information on process groups and these signals.
-#: sysdeps/gnu/errlist.c:945
+#: sysdeps/gnu/errlist.c:946
msgid "Inappropriate operation for background process"
msgstr ""
#. TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is
#. TRANS translated by a program and the translator program dies while starting
#. TRANS up, before it has connected to the file.
-#: sysdeps/gnu/errlist.c:956
+#: sysdeps/gnu/errlist.c:957
msgid "Translator died"
msgstr ""
#. TRANS The experienced user will know what is wrong.
#. TRANS @c This error code is a joke. Its perror text is part of the joke.
#. TRANS @c Don't change it.
-#: sysdeps/gnu/errlist.c:967
+#: sysdeps/gnu/errlist.c:968
msgid "?"
msgstr ""
#. TRANS You did @strong{what}?
-#: sysdeps/gnu/errlist.c:976
+#: sysdeps/gnu/errlist.c:977
msgid "You really blew it this time"
msgstr ""
#. TRANS Go home and have a glass of warm, dairy-fresh milk.
-#: sysdeps/gnu/errlist.c:985
+#: sysdeps/gnu/errlist.c:986
msgid "Computer bought the farm"
msgstr ""
#. TRANS This error code has no purpose.
-#: sysdeps/gnu/errlist.c:994
+#: sysdeps/gnu/errlist.c:995
msgid "Gratuitous error"
msgstr ""
-#: sysdeps/gnu/errlist.c:1002
+#: sysdeps/gnu/errlist.c:1003
msgid "Bad message"
msgstr ""
-#: sysdeps/gnu/errlist.c:1010
+#: sysdeps/gnu/errlist.c:1011
msgid "Identifier removed"
msgstr ""
-#: sysdeps/gnu/errlist.c:1018
+#: sysdeps/gnu/errlist.c:1019
msgid "Multihop attempted"
msgstr ""
-#: sysdeps/gnu/errlist.c:1026
+#: sysdeps/gnu/errlist.c:1027
msgid "No data available"
msgstr ""
-#: sysdeps/gnu/errlist.c:1034
+#: sysdeps/gnu/errlist.c:1035
msgid "Link has been severed"
msgstr ""
-#: sysdeps/gnu/errlist.c:1042
+#: sysdeps/gnu/errlist.c:1043
msgid "No message of desired type"
msgstr ""
-#: sysdeps/gnu/errlist.c:1050
+#: sysdeps/gnu/errlist.c:1051
msgid "Out of streams resources"
msgstr ""
-#: sysdeps/gnu/errlist.c:1058
+#: sysdeps/gnu/errlist.c:1059
msgid "Device not a stream"
msgstr ""
-#: sysdeps/gnu/errlist.c:1066
+#: sysdeps/gnu/errlist.c:1067
msgid "Value too large for defined data type"
msgstr ""
-#: sysdeps/gnu/errlist.c:1074
+#: sysdeps/gnu/errlist.c:1075
msgid "Protocol error"
msgstr ""
-#: sysdeps/gnu/errlist.c:1082
+#: sysdeps/gnu/errlist.c:1083
msgid "Timer expired"
msgstr ""
@@ -6373,195 +6387,195 @@ msgstr ""
#. TRANS completed. @xref{Asynchronous I/O}. When you call @code{aio_cancel},
#. TRANS the normal result is for the operations affected to complete with this
#. TRANS error; @pxref{Cancel AIO Operations}.
-#: sysdeps/gnu/errlist.c:1094
+#: sysdeps/gnu/errlist.c:1095
msgid "Operation canceled"
msgstr ""
-#: sysdeps/gnu/errlist.c:1102
+#: sysdeps/gnu/errlist.c:1103
msgid "Interrupted system call should be restarted"
msgstr ""
-#: sysdeps/gnu/errlist.c:1110
+#: sysdeps/gnu/errlist.c:1111
msgid "Channel number out of range"
msgstr ""
-#: sysdeps/gnu/errlist.c:1118
+#: sysdeps/gnu/errlist.c:1119
msgid "Level 2 not synchronized"
msgstr ""
-#: sysdeps/gnu/errlist.c:1126
+#: sysdeps/gnu/errlist.c:1127
msgid "Level 3 halted"
msgstr ""
-#: sysdeps/gnu/errlist.c:1134
+#: sysdeps/gnu/errlist.c:1135
msgid "Level 3 reset"
msgstr ""
-#: sysdeps/gnu/errlist.c:1142
+#: sysdeps/gnu/errlist.c:1143
msgid "Link number out of range"
msgstr ""
-#: sysdeps/gnu/errlist.c:1150
+#: sysdeps/gnu/errlist.c:1151
msgid "Protocol driver not attached"
msgstr ""
-#: sysdeps/gnu/errlist.c:1158
+#: sysdeps/gnu/errlist.c:1159
msgid "No CSI structure available"
msgstr ""
-#: sysdeps/gnu/errlist.c:1166
+#: sysdeps/gnu/errlist.c:1167
msgid "Level 2 halted"
msgstr ""
-#: sysdeps/gnu/errlist.c:1174
+#: sysdeps/gnu/errlist.c:1175
msgid "Invalid exchange"
msgstr ""
-#: sysdeps/gnu/errlist.c:1182
+#: sysdeps/gnu/errlist.c:1183
msgid "Invalid request descriptor"
msgstr ""
-#: sysdeps/gnu/errlist.c:1190
+#: sysdeps/gnu/errlist.c:1191
msgid "Exchange full"
msgstr ""
-#: sysdeps/gnu/errlist.c:1198
+#: sysdeps/gnu/errlist.c:1199
msgid "No anode"
msgstr ""
-#: sysdeps/gnu/errlist.c:1206
+#: sysdeps/gnu/errlist.c:1207
msgid "Invalid request code"
msgstr ""
-#: sysdeps/gnu/errlist.c:1214
+#: sysdeps/gnu/errlist.c:1215
msgid "Invalid slot"
msgstr ""
-#: sysdeps/gnu/errlist.c:1222
+#: sysdeps/gnu/errlist.c:1223
msgid "File locking deadlock error"
msgstr ""
-#: sysdeps/gnu/errlist.c:1230
+#: sysdeps/gnu/errlist.c:1231
msgid "Bad font file format"
msgstr ""
-#: sysdeps/gnu/errlist.c:1238
+#: sysdeps/gnu/errlist.c:1239
msgid "Machine is not on the network"
msgstr ""
-#: sysdeps/gnu/errlist.c:1246
+#: sysdeps/gnu/errlist.c:1247
msgid "Package not installed"
msgstr ""
-#: sysdeps/gnu/errlist.c:1254
+#: sysdeps/gnu/errlist.c:1255
msgid "Advertise error"
msgstr ""
-#: sysdeps/gnu/errlist.c:1262
+#: sysdeps/gnu/errlist.c:1263
msgid "Srmount error"
msgstr ""
-#: sysdeps/gnu/errlist.c:1270
+#: sysdeps/gnu/errlist.c:1271
msgid "Communication error on send"
msgstr ""
-#: sysdeps/gnu/errlist.c:1278
+#: sysdeps/gnu/errlist.c:1279
msgid "RFS specific error"
msgstr ""
-#: sysdeps/gnu/errlist.c:1286
+#: sysdeps/gnu/errlist.c:1287
msgid "Name not unique on network"
msgstr ""
-#: sysdeps/gnu/errlist.c:1294
+#: sysdeps/gnu/errlist.c:1295
msgid "File descriptor in bad state"
msgstr ""
-#: sysdeps/gnu/errlist.c:1302
+#: sysdeps/gnu/errlist.c:1303
msgid "Remote address changed"
msgstr ""
-#: sysdeps/gnu/errlist.c:1310
+#: sysdeps/gnu/errlist.c:1311
msgid "Can not access a needed shared library"
msgstr ""
-#: sysdeps/gnu/errlist.c:1318
+#: sysdeps/gnu/errlist.c:1319
msgid "Accessing a corrupted shared library"
msgstr ""
-#: sysdeps/gnu/errlist.c:1326
+#: sysdeps/gnu/errlist.c:1327
msgid ".lib section in a.out corrupted"
msgstr ""
-#: sysdeps/gnu/errlist.c:1334
+#: sysdeps/gnu/errlist.c:1335
msgid "Attempting to link in too many shared libraries"
msgstr ""
-#: sysdeps/gnu/errlist.c:1342
+#: sysdeps/gnu/errlist.c:1343
msgid "Cannot exec a shared library directly"
msgstr ""
-#: sysdeps/gnu/errlist.c:1350
+#: sysdeps/gnu/errlist.c:1351
msgid "Streams pipe error"
msgstr ""
-#: sysdeps/gnu/errlist.c:1358
+#: sysdeps/gnu/errlist.c:1359
msgid "Structure needs cleaning"
msgstr ""
-#: sysdeps/gnu/errlist.c:1366
+#: sysdeps/gnu/errlist.c:1367
msgid "Not a XENIX named type file"
msgstr ""
-#: sysdeps/gnu/errlist.c:1374
+#: sysdeps/gnu/errlist.c:1375
msgid "No XENIX semaphores available"
msgstr ""
-#: sysdeps/gnu/errlist.c:1382
+#: sysdeps/gnu/errlist.c:1383
msgid "Is a named type file"
msgstr ""
-#: sysdeps/gnu/errlist.c:1390
+#: sysdeps/gnu/errlist.c:1391
msgid "Remote I/O error"
msgstr ""
-#: sysdeps/gnu/errlist.c:1398
+#: sysdeps/gnu/errlist.c:1399
msgid "No medium found"
msgstr ""
-#: sysdeps/gnu/errlist.c:1406
+#: sysdeps/gnu/errlist.c:1407
msgid "Wrong medium type"
msgstr ""
-#: sysdeps/gnu/errlist.c:1414
+#: sysdeps/gnu/errlist.c:1415
msgid "Required key not available"
msgstr ""
-#: sysdeps/gnu/errlist.c:1422
+#: sysdeps/gnu/errlist.c:1423
msgid "Key has expired"
msgstr ""
-#: sysdeps/gnu/errlist.c:1430
+#: sysdeps/gnu/errlist.c:1431
msgid "Key has been revoked"
msgstr ""
-#: sysdeps/gnu/errlist.c:1438
+#: sysdeps/gnu/errlist.c:1439
msgid "Key was rejected by service"
msgstr ""
-#: sysdeps/gnu/errlist.c:1446
+#: sysdeps/gnu/errlist.c:1447
msgid "Owner died"
msgstr ""
-#: sysdeps/gnu/errlist.c:1454
+#: sysdeps/gnu/errlist.c:1455
msgid "State not recoverable"
msgstr ""
-#: sysdeps/gnu/errlist.c:1462
+#: sysdeps/gnu/errlist.c:1463
msgid "Operation not possible due to RF-kill"
msgstr ""
-#: sysdeps/gnu/errlist.c:1470
+#: sysdeps/gnu/errlist.c:1471
msgid "Memory page has hardware error"
msgstr ""
@@ -6642,6 +6656,11 @@ msgstr ""
msgid "%s is for unknown machine %d.\n"
msgstr ""
+#: sysdeps/unix/sysv/linux/ia64/makecontext.c:58
+#, c-format
+msgid "makecontext: does not know how to handle more than 8 arguments\n"
+msgstr ""
+
#: sysdeps/unix/sysv/linux/lddlibc4.c:60
#, c-format
msgid ""
@@ -6659,28 +6678,28 @@ msgstr ""
msgid "cannot read header from `%s'"
msgstr ""
-#: timezone/zdump.c:280
+#: timezone/zdump.c:282
msgid "lacks alphabetic at start"
msgstr ""
-#: timezone/zdump.c:282
+#: timezone/zdump.c:284
msgid "has fewer than 3 alphabetics"
msgstr ""
-#: timezone/zdump.c:284
+#: timezone/zdump.c:286
msgid "has more than 6 alphabetics"
msgstr ""
-#: timezone/zdump.c:292
+#: timezone/zdump.c:294
msgid "differs from POSIX standard"
msgstr ""
-#: timezone/zdump.c:298
+#: timezone/zdump.c:300
#, c-format
msgid "%s: warning: zone \"%s\" abbreviation \"%s\" %s\n"
msgstr ""
-#: timezone/zdump.c:307
+#: timezone/zdump.c:309
#, c-format
msgid ""
"%s: usage: %s [--version] [--help] [-{vV}] [-{ct} [lo,]hi] zonename ...\n"
@@ -6688,41 +6707,41 @@ msgid ""
"Report bugs to %s.\n"
msgstr ""
-#: timezone/zdump.c:384
+#: timezone/zdump.c:386
#, c-format
msgid "%s: wild -c argument %s\n"
msgstr ""
-#: timezone/zdump.c:417
+#: timezone/zdump.c:419
#, c-format
msgid "%s: wild -t argument %s\n"
msgstr ""
-#: timezone/zdump.c:506
+#: timezone/zdump.c:508
msgid "Error writing to standard output"
msgstr ""
-#: timezone/zic.c:370
+#: timezone/zic.c:371
#, c-format
msgid "%s: Memory exhausted: %s\n"
msgstr ""
-#: timezone/zic.c:410
+#: timezone/zic.c:438
#, c-format
msgid "\"%s\", line %d: "
msgstr ""
-#: timezone/zic.c:413
+#: timezone/zic.c:441
#, c-format
msgid " (rule from \"%s\", line %d)"
msgstr ""
-#: timezone/zic.c:432
+#: timezone/zic.c:460
#, c-format
msgid "warning: "
msgstr ""
-#: timezone/zic.c:442
+#: timezone/zic.c:470
#, c-format
msgid ""
"%s: usage is %s [ --version ] [ --help ] [ -v ] [ -l localtime ] [ -p "
@@ -6732,341 +6751,337 @@ msgid ""
"Report bugs to %s.\n"
msgstr ""
-#: timezone/zic.c:477
+#: timezone/zic.c:505
msgid "wild compilation-time specification of zic_t"
msgstr ""
-#: timezone/zic.c:496
+#: timezone/zic.c:524
#, c-format
msgid "%s: More than one -d option specified\n"
msgstr ""
-#: timezone/zic.c:506
+#: timezone/zic.c:534
#, c-format
msgid "%s: More than one -l option specified\n"
msgstr ""
-#: timezone/zic.c:516
+#: timezone/zic.c:544
#, c-format
msgid "%s: More than one -p option specified\n"
msgstr ""
-#: timezone/zic.c:526
+#: timezone/zic.c:554
#, c-format
msgid "%s: More than one -y option specified\n"
msgstr ""
-#: timezone/zic.c:536
+#: timezone/zic.c:564
#, c-format
msgid "%s: More than one -L option specified\n"
msgstr ""
-#: timezone/zic.c:583
+#: timezone/zic.c:611
msgid "link to link"
msgstr ""
-#: timezone/zic.c:650
+#: timezone/zic.c:678
msgid "hard link failed, symbolic link used"
msgstr ""
-#: timezone/zic.c:660
+#: timezone/zic.c:688
#, c-format
msgid "%s: Can't read %s: %s\n"
msgstr ""
-#: timezone/zic.c:668 timezone/zic.c:1533
+#: timezone/zic.c:696 timezone/zic.c:1595
#, c-format
msgid "%s: Can't create %s: %s\n"
msgstr ""
-#: timezone/zic.c:676 timezone/zic.c:881
+#: timezone/zic.c:704 timezone/zic.c:939
#, c-format
msgid "%s: Error reading %s\n"
msgstr ""
-#: timezone/zic.c:682 timezone/zic.c:1750
+#: timezone/zic.c:710 timezone/zic.c:1792
#, c-format
msgid "%s: Error writing %s\n"
msgstr ""
-#: timezone/zic.c:686
+#: timezone/zic.c:714
msgid "link failed, copy used"
msgstr ""
-#: timezone/zic.c:744 timezone/zic.c:746
+#: timezone/zic.c:802 timezone/zic.c:804
msgid "same rule name in multiple files"
msgstr ""
-#: timezone/zic.c:787
+#: timezone/zic.c:845
msgid "unruly zone"
msgstr ""
-#: timezone/zic.c:794
+#: timezone/zic.c:852
#, c-format
msgid "%s in ruleless zone"
msgstr ""
-#: timezone/zic.c:814
+#: timezone/zic.c:872
msgid "standard input"
msgstr ""
-#: timezone/zic.c:819
+#: timezone/zic.c:877
#, c-format
msgid "%s: Can't open %s: %s\n"
msgstr ""
-#: timezone/zic.c:830
+#: timezone/zic.c:888
msgid "line too long"
msgstr ""
-#: timezone/zic.c:850
+#: timezone/zic.c:908
msgid "input line of unknown type"
msgstr ""
-#: timezone/zic.c:866
+#: timezone/zic.c:924
#, c-format
msgid "%s: Leap line in non leap seconds file %s\n"
msgstr ""
-#: timezone/zic.c:873 timezone/zic.c:1282 timezone/zic.c:1304
+#: timezone/zic.c:931 timezone/zic.c:1339 timezone/zic.c:1361
#, c-format
msgid "%s: panic: Invalid l_value %d\n"
msgstr ""
-#: timezone/zic.c:888
+#: timezone/zic.c:946
#, c-format
msgid "%s: Error closing %s: %s\n"
msgstr ""
-#: timezone/zic.c:893
+#: timezone/zic.c:951
msgid "expected continuation line not found"
msgstr ""
-#: timezone/zic.c:934 timezone/zic.c:2610 timezone/zic.c:2624
+#: timezone/zic.c:992 timezone/zic.c:2644 timezone/zic.c:2658
msgid "time overflow"
msgstr ""
-#: timezone/zic.c:938
-msgid "24:00 not handled by pre-1998 versions of zic"
-msgstr ""
-
-#: timezone/zic.c:941
+#: timezone/zic.c:997
msgid "values over 24 hours not handled by pre-2007 versions of zic"
msgstr ""
-#: timezone/zic.c:952
+#: timezone/zic.c:1008
msgid "wrong number of fields on Rule line"
msgstr ""
-#: timezone/zic.c:956
+#: timezone/zic.c:1012
msgid "nameless rule"
msgstr ""
-#: timezone/zic.c:961
+#: timezone/zic.c:1017
msgid "invalid saved time"
msgstr ""
-#: timezone/zic.c:978
+#: timezone/zic.c:1034
msgid "wrong number of fields on Zone line"
msgstr ""
-#: timezone/zic.c:983
+#: timezone/zic.c:1039
#, c-format
msgid "\"Zone %s\" line and -l option are mutually exclusive"
msgstr ""
-#: timezone/zic.c:989
+#: timezone/zic.c:1045
#, c-format
msgid "\"Zone %s\" line and -p option are mutually exclusive"
msgstr ""
-#: timezone/zic.c:997
+#: timezone/zic.c:1053
#, c-format
msgid "duplicate zone name %s (file \"%s\", line %d)"
msgstr ""
-#: timezone/zic.c:1010
+#: timezone/zic.c:1066
msgid "wrong number of fields on Zone continuation line"
msgstr ""
-#: timezone/zic.c:1047
+#: timezone/zic.c:1103
msgid "invalid UT offset"
msgstr ""
-#: timezone/zic.c:1050
+#: timezone/zic.c:1106
msgid "invalid abbreviation format"
msgstr ""
-#: timezone/zic.c:1079
+#: timezone/zic.c:1135
msgid "Zone continuation line end time is not after end time of previous line"
msgstr ""
-#: timezone/zic.c:1105
+#: timezone/zic.c:1161
msgid "wrong number of fields on Leap line"
msgstr ""
-#: timezone/zic.c:1114
+#: timezone/zic.c:1170
msgid "invalid leaping year"
msgstr ""
-#: timezone/zic.c:1134 timezone/zic.c:1236
+#: timezone/zic.c:1190 timezone/zic.c:1293
msgid "invalid month name"
msgstr ""
-#: timezone/zic.c:1147 timezone/zic.c:1349 timezone/zic.c:1363
+#: timezone/zic.c:1203 timezone/zic.c:1406 timezone/zic.c:1420
msgid "invalid day of month"
msgstr ""
-#: timezone/zic.c:1152
-msgid "time before zero"
-msgstr ""
-
-#: timezone/zic.c:1156
+#: timezone/zic.c:1208
msgid "time too small"
msgstr ""
-#: timezone/zic.c:1160
+#: timezone/zic.c:1212
msgid "time too large"
msgstr ""
-#: timezone/zic.c:1164 timezone/zic.c:1265
+#: timezone/zic.c:1216 timezone/zic.c:1322
msgid "invalid time of day"
msgstr ""
-#: timezone/zic.c:1183
+#: timezone/zic.c:1235
msgid "illegal CORRECTION field on Leap line"
msgstr ""
-#: timezone/zic.c:1188
+#: timezone/zic.c:1240
msgid "illegal Rolling/Stationary field on Leap line"
msgstr ""
-#: timezone/zic.c:1202
+#: timezone/zic.c:1246
+msgid "leap second precedes Big Bang"
+msgstr ""
+
+#: timezone/zic.c:1259
msgid "wrong number of fields on Link line"
msgstr ""
-#: timezone/zic.c:1206
+#: timezone/zic.c:1263
msgid "blank FROM field on Link line"
msgstr ""
-#: timezone/zic.c:1210
+#: timezone/zic.c:1267
msgid "blank TO field on Link line"
msgstr ""
-#: timezone/zic.c:1286
+#: timezone/zic.c:1343
msgid "invalid starting year"
msgstr ""
-#: timezone/zic.c:1308
+#: timezone/zic.c:1365
msgid "invalid ending year"
msgstr ""
-#: timezone/zic.c:1312
+#: timezone/zic.c:1369
msgid "starting year greater than ending year"
msgstr ""
-#: timezone/zic.c:1319
+#: timezone/zic.c:1376
msgid "typed single year"
msgstr ""
-#: timezone/zic.c:1354
+#: timezone/zic.c:1411
msgid "invalid weekday name"
msgstr ""
-#: timezone/zic.c:1523
+#: timezone/zic.c:1530
+msgid "pre-2014 clients may mishandle more than 1200 transition times"
+msgstr ""
+
+#: timezone/zic.c:1585
#, c-format
msgid "%s: Can't remove %s: %s\n"
msgstr ""
-#: timezone/zic.c:2105
+#: timezone/zic.c:2143
msgid "no POSIX environment variable for zone"
msgstr ""
-#: timezone/zic.c:2111
+#: timezone/zic.c:2149
#, c-format
msgid "%s: pre-%d clients may mishandle distant timestamps"
msgstr ""
-#: timezone/zic.c:2292
+#: timezone/zic.c:2329
msgid "can't determine time zone abbreviation to use just after until time"
msgstr ""
-#: timezone/zic.c:2338 timezone/zic.c:2416
+#: timezone/zic.c:2375 timezone/zic.c:2450
msgid "too many local time types"
msgstr ""
-#: timezone/zic.c:2374
-msgid "too many transitions?!"
-msgstr ""
-
-#: timezone/zic.c:2389
+#: timezone/zic.c:2423
msgid "internal error - addtype called with bad isdst"
msgstr ""
-#: timezone/zic.c:2393
+#: timezone/zic.c:2427
msgid "internal error - addtype called with bad ttisstd"
msgstr ""
-#: timezone/zic.c:2397
+#: timezone/zic.c:2431
msgid "internal error - addtype called with bad ttisgmt"
msgstr ""
-#: timezone/zic.c:2420
+#: timezone/zic.c:2454
msgid "UT offset out of range"
msgstr ""
-#: timezone/zic.c:2444
+#: timezone/zic.c:2478
msgid "too many leap seconds"
msgstr ""
-#: timezone/zic.c:2450
+#: timezone/zic.c:2484
msgid "repeated leap second moment"
msgstr ""
-#: timezone/zic.c:2500
+#: timezone/zic.c:2534
msgid "Wild result from command execution"
msgstr ""
-#: timezone/zic.c:2501
+#: timezone/zic.c:2535
#, c-format
msgid "%s: command was '%s', result was %d\n"
msgstr ""
-#: timezone/zic.c:2592
+#: timezone/zic.c:2626
msgid "Odd number of quotation marks"
msgstr ""
-#: timezone/zic.c:2669
+#: timezone/zic.c:2703
msgid "use of 2/29 in non leap-year"
msgstr ""
-#: timezone/zic.c:2704
+#: timezone/zic.c:2738
msgid ""
"rule goes past start/end of month--will not work with pre-2004 versions of "
"zic"
msgstr ""
-#: timezone/zic.c:2735
+#: timezone/zic.c:2769
msgid "time zone abbreviation lacks alphabetic at start"
msgstr ""
-#: timezone/zic.c:2737
+#: timezone/zic.c:2771
msgid "time zone abbreviation has fewer than 3 alphabetics"
msgstr ""
-#: timezone/zic.c:2739
+#: timezone/zic.c:2773
msgid "time zone abbreviation has too many alphabetics"
msgstr ""
-#: timezone/zic.c:2749
+#: timezone/zic.c:2783
msgid "time zone abbreviation differs from POSIX standard"
msgstr ""
-#: timezone/zic.c:2755
+#: timezone/zic.c:2789
msgid "too many, or too long, time zone abbreviations"
msgstr ""
-#: timezone/zic.c:2795
+#: timezone/zic.c:2829
#, c-format
msgid "%s: Can't create directory %s: %s\n"
msgstr ""
-----------------------------------------------------------------------
Summary of changes:
ChangeLog | 4 +
po/libc.pot | 969 ++++++++++++++++++++++++++++++-----------------------------
2 files changed, 496 insertions(+), 477 deletions(-)
hooks/post-receive
--
GNU C Library master sources