This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
[PATCH 2/4] Change return type of gdbarch_software_single_step to vector<CORE_ADDR>
- From: Simon Marchi <simon dot marchi at polymtl dot ca>
- To: gdb-patches at sourceware dot org
- Cc: Simon Marchi <simon dot marchi at polymtl dot ca>
- Date: Sun, 16 Apr 2017 10:14:28 -0400
- Subject: [PATCH 2/4] Change return type of gdbarch_software_single_step to vector<CORE_ADDR>
- Authentication-results: sourceware.org; auth=none
- References: <20170416141430.2585-1-simon.marchi@polymtl.ca>
This is a relatively straightforward patch that changes
gdbarch_software_single_step so it returns an std::vector<CORE_ADDR>
instead of a VEC (CORE_ADDR).
gdb/ChangeLog:
* gdbarch.sh (software_single_step): Change return type to
std::vector<CORE_ADDR>.
* gdbarch.c, gdbarch.h: Re-generate.
* arch/arm-get-next-pcs.c (thumb_deal_with_atomic_sequence_raw):
Adjust.
(arm_deal_with_atomic_sequence_raw): Adjust.
(thumb_get_next_pcs_raw): Adjust.
(arm_get_next_pcs_raw): Adjust.
(arm_get_next_pcs): Adjust.
* arch/arm-get-next-pcs.h (arm_get_next_pcs): Adjust.
* aarch64-tdep.c (aarch64_software_single_step): Adjust.
* alpha-tdep.c (alpha_deal_with_atomic_sequence): Adjust.
(alpha_software_single_step): Adjust.
* alpha-tdep.h (alpha_software_single_step): Adjust.
* arm-linux-tdep.c (arm_linux_software_single_step): Adjust.
* arm-tdep.c (arm_software_single_step): Adjust.
(arm_breakpoint_kind_from_current_state): Adjust.
* arm-tdep.h (arm_software_single_step): Adjust.
* breakpoint.c (insert_single_step_breakpoint): Adjust.
* cris-tdep.c (cris_software_single_step): Adjust.
* mips-tdep.c (mips_deal_with_atomic_sequence): Adjust.
(micromips_deal_with_atomic_sequence): Adjust.
(deal_with_atomic_sequence): Adjust.
(mips_software_single_step): Adjust.
* mips-tdep.h (mips_software_single_step): Adjust.
* moxie-tdep.c (moxie_software_single_step): Adjust.
* nios2-tdep.c (nios2_software_single_step): Adjust.
* ppc-tdep.h (ppc_deal_with_atomic_sequence): Adjust.
* rs6000-aix-tdep.c (rs6000_software_single_step): Adjust.
* rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust.
* s390-linux-tdep.c (s390_software_single_step): Adjust.
* sparc-tdep.c (sparc_software_single_step): Adjust.
* spu-tdep.c (spu_software_single_step): Adjust.
* tic6x-tdep.c (tic6x_software_single_step): Adjust.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_gdbserver_get_next_pcs): Adjust to
software_single_step change of return type to
std::vector<CORE_ADDR>.
* linux-low.c (install_software_single_step_breakpoints):
Likewise.
* linux-low.h (install_software_single_step_breakpoints):
Likewise.
---
gdb/aarch64-tdep.c | 17 +++++----
gdb/alpha-tdep.c | 23 ++++++-----
gdb/alpha-tdep.h | 3 +-
gdb/arch/arm-get-next-pcs.c | 89 +++++++++++++++++++++----------------------
gdb/arch/arm-get-next-pcs.h | 5 ++-
gdb/arm-linux-tdep.c | 21 +++-------
gdb/arm-tdep.c | 30 +++------------
gdb/arm-tdep.h | 4 +-
gdb/breakpoint.c | 10 ++---
gdb/cris-tdep.c | 8 ++--
gdb/gdbarch.c | 2 +-
gdb/gdbarch.h | 5 ++-
gdb/gdbarch.sh | 3 +-
gdb/gdbserver/linux-arm-low.c | 7 +---
gdb/gdbserver/linux-low.c | 9 +----
gdb/gdbserver/linux-low.h | 2 +-
gdb/mips-tdep.c | 57 +++++++++++++--------------
gdb/mips-tdep.h | 3 +-
gdb/moxie-tdep.c | 26 ++++++-------
gdb/nios2-tdep.c | 7 +---
gdb/ppc-tdep.h | 3 +-
gdb/rs6000-aix-tdep.c | 10 ++---
gdb/rs6000-tdep.c | 15 ++++----
gdb/s390-linux-tdep.c | 15 +++-----
gdb/sparc-tdep.c | 8 ++--
gdb/spu-tdep.c | 9 ++---
gdb/tic6x-tdep.c | 7 +---
27 files changed, 176 insertions(+), 222 deletions(-)
diff --git a/gdb/aarch64-tdep.c b/gdb/aarch64-tdep.c
index 28c2573d18..ff5bc04ea2 100644
--- a/gdb/aarch64-tdep.c
+++ b/gdb/aarch64-tdep.c
@@ -2417,7 +2417,7 @@ value_of_aarch64_user_reg (struct frame_info *frame, const void *baton)
/* Implement the "software_single_step" gdbarch method, needed to
single step through atomic sequences on AArch64. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
aarch64_software_single_step (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
@@ -2435,14 +2435,13 @@ aarch64_software_single_step (struct regcache *regcache)
int bc_insn_count = 0; /* Conditional branch instruction count. */
int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
aarch64_inst inst;
- VEC (CORE_ADDR) *next_pcs = NULL;
if (aarch64_decode_insn (insn, &inst, 1) != 0)
- return NULL;
+ return {};
/* Look for a Load Exclusive instruction which begins the sequence. */
if (inst.opcode->iclass != ldstexcl || bit (insn, 22) == 0)
- return NULL;
+ return {};
for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
{
@@ -2451,14 +2450,14 @@ aarch64_software_single_step (struct regcache *regcache)
byte_order_for_code);
if (aarch64_decode_insn (insn, &inst, 1) != 0)
- return NULL;
+ return {};
/* Check if the instruction is a conditional branch. */
if (inst.opcode->iclass == condbranch)
{
gdb_assert (inst.operands[0].type == AARCH64_OPND_ADDR_PCREL19);
if (bc_insn_count >= 1)
- return NULL;
+ return {};
/* It is, so we'll try to set a breakpoint at the destination. */
breaks[1] = loc + inst.operands[0].imm.value;
@@ -2477,7 +2476,7 @@ aarch64_software_single_step (struct regcache *regcache)
/* We didn't find a closing Store Exclusive instruction, fall back. */
if (!closing_insn)
- return NULL;
+ return {};
/* Insert breakpoint after the end of the atomic sequence. */
breaks[0] = loc + insn_size;
@@ -2489,10 +2488,12 @@ aarch64_software_single_step (struct regcache *regcache)
|| (breaks[1] >= pc && breaks[1] <= closing_insn)))
last_breakpoint = 0;
+ std::vector<CORE_ADDR> next_pcs;
+
/* Insert the breakpoint at the end of the sequence, and one at the
destination of the conditional branch, if it exists. */
for (index = 0; index <= last_breakpoint; index++)
- VEC_safe_push (CORE_ADDR, next_pcs, breaks[index]);
+ next_pcs.push_back (breaks[index]);
return next_pcs;
}
diff --git a/gdb/alpha-tdep.c b/gdb/alpha-tdep.c
index 7c521db24c..d62566c4b0 100644
--- a/gdb/alpha-tdep.c
+++ b/gdb/alpha-tdep.c
@@ -765,7 +765,7 @@ static const int stq_c_opcode = 0x2f;
is found, attempt to step through it. A breakpoint is placed at the end of
the sequence. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
alpha_deal_with_atomic_sequence (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
@@ -779,12 +779,11 @@ alpha_deal_with_atomic_sequence (struct regcache *regcache)
int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
const int atomic_sequence_length = 16; /* Instruction sequence length. */
int bc_insn_count = 0; /* Conditional branch instruction count. */
- VEC (CORE_ADDR) *next_pcs = NULL;
/* Assume all atomic sequences start with a LDL_L/LDQ_L instruction. */
if (INSN_OPCODE (insn) != ldl_l_opcode
&& INSN_OPCODE (insn) != ldq_l_opcode)
- return NULL;
+ return {};
/* Assume that no atomic sequence is longer than "atomic_sequence_length"
instructions. */
@@ -803,8 +802,8 @@ alpha_deal_with_atomic_sequence (struct regcache *regcache)
immediate = (immediate ^ 0x400000) - 0x400000;
if (bc_insn_count >= 1)
- return NULL; /* More than one branch found, fallback
- to the standard single-step code. */
+ return {}; /* More than one branch found, fallback
+ to the standard single-step code. */
breaks[1] = loc + ALPHA_INSN_SIZE + immediate;
@@ -820,7 +819,7 @@ alpha_deal_with_atomic_sequence (struct regcache *regcache)
/* Assume that the atomic sequence ends with a STL_C/STQ_C instruction. */
if (INSN_OPCODE (insn) != stl_c_opcode
&& INSN_OPCODE (insn) != stq_c_opcode)
- return NULL;
+ return {};
closing_insn = loc;
loc += ALPHA_INSN_SIZE;
@@ -835,8 +834,10 @@ alpha_deal_with_atomic_sequence (struct regcache *regcache)
|| (breaks[1] >= pc && breaks[1] <= closing_insn)))
last_breakpoint = 0;
+ std::vector<CORE_ADDR> next_pcs;
+
for (index = 0; index <= last_breakpoint; index++)
- VEC_safe_push (CORE_ADDR, next_pcs, breaks[index]);
+ next_pcs.push_back (breaks[index]);
return next_pcs;
}
@@ -1717,17 +1718,15 @@ alpha_next_pc (struct regcache *regcache, CORE_ADDR pc)
return (pc + ALPHA_INSN_SIZE);
}
-VEC (CORE_ADDR) *
+std::vector<CORE_ADDR>
alpha_software_single_step (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
CORE_ADDR pc;
- VEC (CORE_ADDR) *next_pcs = NULL;
- pc = regcache_read_pc (regcache);
+ pc = alpha_next_pc (regcache, regcache_read_pc (regcache));
- VEC_safe_push (CORE_ADDR, next_pcs, alpha_next_pc (regcache, pc));
- return next_pcs;
+ return {pc};
}
diff --git a/gdb/alpha-tdep.h b/gdb/alpha-tdep.h
index ab46ba56be..5f1d103273 100644
--- a/gdb/alpha-tdep.h
+++ b/gdb/alpha-tdep.h
@@ -103,7 +103,8 @@ struct gdbarch_tdep
};
extern unsigned int alpha_read_insn (struct gdbarch *gdbarch, CORE_ADDR pc);
-extern VEC (CORE_ADDR) *alpha_software_single_step (struct regcache *regcache);
+extern std::vector<CORE_ADDR> alpha_software_single_step
+ (struct regcache *regcache);
extern CORE_ADDR alpha_after_prologue (CORE_ADDR pc);
extern void alpha_mdebug_init_abi (struct gdbarch_info, struct gdbarch *);
diff --git a/gdb/arch/arm-get-next-pcs.c b/gdb/arch/arm-get-next-pcs.c
index 398dd59ac7..4e5234cb77 100644
--- a/gdb/arch/arm-get-next-pcs.c
+++ b/gdb/arch/arm-get-next-pcs.c
@@ -45,7 +45,7 @@ arm_get_next_pcs_ctor (struct arm_get_next_pcs *self,
is found, attempt to step through it. The end of the sequence address is
added to the next_pcs list. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
thumb_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
{
int byte_order_for_code = self->byte_order_for_code;
@@ -58,27 +58,26 @@ thumb_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
const int atomic_sequence_length = 16; /* Instruction sequence length. */
ULONGEST status, itstate;
- VEC (CORE_ADDR) *next_pcs = NULL;
/* We currently do not support atomic sequences within an IT block. */
status = regcache_raw_get_unsigned (self->regcache, ARM_PS_REGNUM);
itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
if (itstate & 0x0f)
- return NULL;
+ return {};
/* Assume all atomic sequences start with a ldrex{,b,h,d} instruction. */
insn1 = self->ops->read_mem_uint (loc, 2, byte_order_for_code);
loc += 2;
if (thumb_insn_size (insn1) != 4)
- return NULL;
+ return {};
insn2 = self->ops->read_mem_uint (loc, 2, byte_order_for_code);
loc += 2;
if (!((insn1 & 0xfff0) == 0xe850
|| ((insn1 & 0xfff0) == 0xe8d0 && (insn2 & 0x00c0) == 0x0040)))
- return NULL;
+ return {};
/* Assume that no atomic sequence is longer than "atomic_sequence_length"
instructions. */
@@ -95,8 +94,8 @@ thumb_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
if ((insn1 & 0xf000) == 0xd000 && bits (insn1, 8, 11) != 0x0f)
{
if (last_breakpoint > 0)
- return NULL; /* More than one conditional branch found,
- fallback to the standard code. */
+ return {}; /* More than one conditional branch found,
+ fallback to the standard code. */
breaks[1] = loc + 2 + (sbits (insn1, 0, 7) << 1);
last_breakpoint++;
@@ -107,7 +106,7 @@ thumb_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
Fall back to standard code to avoid losing control of
execution. */
else if (thumb_instruction_changes_pc (insn1))
- return NULL;
+ return {};
}
else
{
@@ -135,8 +134,8 @@ thumb_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
offset += (imm1 << 12) + (imm2 << 1);
if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found,
- fallback to the standard code. */
+ return {}; /* More than one conditional branch found,
+ fallback to the standard code. */
breaks[1] = loc + offset;
last_breakpoint++;
@@ -147,7 +146,7 @@ thumb_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
Fall back to standard code to avoid losing control of
execution. */
else if (thumb2_instruction_changes_pc (insn1, insn2))
- return NULL;
+ return {};
/* If we find a strex{,b,h,d}, we're done. */
if ((insn1 & 0xfff0) == 0xe840
@@ -158,7 +157,7 @@ thumb_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
/* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
if (insn_count == atomic_sequence_length)
- return NULL;
+ return {};
/* Insert a breakpoint right after the end of the atomic sequence. */
breaks[0] = loc;
@@ -170,9 +169,11 @@ thumb_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
|| (breaks[1] >= pc && breaks[1] < loc)))
last_breakpoint = 0;
+ std::vector<CORE_ADDR> next_pcs;
+
/* Adds the breakpoints to the list to be inserted. */
for (index = 0; index <= last_breakpoint; index++)
- VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (breaks[index]));
+ next_pcs.push_back (MAKE_THUMB_ADDR (breaks[index]));
return next_pcs;
}
@@ -182,7 +183,7 @@ thumb_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
is found, attempt to step through it. The end of the sequence address is
added to the next_pcs list. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
arm_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
{
int byte_order_for_code = self->byte_order_for_code;
@@ -194,7 +195,6 @@ arm_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
int index;
int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
const int atomic_sequence_length = 16; /* Instruction sequence length. */
- VEC (CORE_ADDR) *next_pcs = NULL;
/* Assume all atomic sequences start with a ldrex{,b,h,d} instruction.
Note that we do not currently support conditionally executed atomic
@@ -203,7 +203,7 @@ arm_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
loc += 4;
if ((insn & 0xff9000f0) != 0xe1900090)
- return NULL;
+ return {};
/* Assume that no atomic sequence is longer than "atomic_sequence_length"
instructions. */
@@ -219,8 +219,8 @@ arm_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
if (bits (insn, 24, 27) == 0xa)
{
if (last_breakpoint > 0)
- return NULL; /* More than one conditional branch found, fallback
- to the standard single-step code. */
+ return {}; /* More than one conditional branch found, fallback
+ to the standard single-step code. */
breaks[1] = BranchDest (loc - 4, insn);
last_breakpoint++;
@@ -230,7 +230,7 @@ arm_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
but conditional branches to change the PC. Fall back to standard
code to avoid losing control of execution. */
else if (arm_instruction_changes_pc (insn))
- return NULL;
+ return {};
/* If we find a strex{,b,h,d}, we're done. */
if ((insn & 0xff9000f0) == 0xe1800090)
@@ -239,7 +239,7 @@ arm_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
/* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
if (insn_count == atomic_sequence_length)
- return NULL;
+ return {};
/* Insert a breakpoint right after the end of the atomic sequence. */
breaks[0] = loc;
@@ -251,16 +251,18 @@ arm_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self)
|| (breaks[1] >= pc && breaks[1] < loc)))
last_breakpoint = 0;
+ std::vector<CORE_ADDR> next_pcs;
+
/* Adds the breakpoints to the list to be inserted. */
for (index = 0; index <= last_breakpoint; index++)
- VEC_safe_push (CORE_ADDR, next_pcs, breaks[index]);
+ next_pcs.push_back (breaks[index]);
return next_pcs;
}
/* Find the next possible PCs for thumb mode. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
thumb_get_next_pcs_raw (struct arm_get_next_pcs *self)
{
int byte_order = self->byte_order;
@@ -272,7 +274,7 @@ thumb_get_next_pcs_raw (struct arm_get_next_pcs *self)
unsigned long offset;
ULONGEST status, itstate;
struct regcache *regcache = self->regcache;
- VEC (CORE_ADDR) * next_pcs = NULL;
+ std::vector<CORE_ADDR> next_pcs;
nextpc = MAKE_THUMB_ADDR (nextpc);
pc_val = MAKE_THUMB_ADDR (pc_val);
@@ -315,7 +317,7 @@ thumb_get_next_pcs_raw (struct arm_get_next_pcs *self)
itstate = thumb_advance_itstate (itstate);
}
- VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+ next_pcs.push_back (MAKE_THUMB_ADDR (pc));
return next_pcs;
}
else if (itstate != 0)
@@ -335,7 +337,7 @@ thumb_get_next_pcs_raw (struct arm_get_next_pcs *self)
itstate = thumb_advance_itstate (itstate);
}
- VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+ next_pcs.push_back (MAKE_THUMB_ADDR (pc));
return next_pcs;
}
else if ((itstate & 0x0f) == 0x08)
@@ -361,7 +363,7 @@ thumb_get_next_pcs_raw (struct arm_get_next_pcs *self)
/* Set a breakpoint on the following instruction. */
gdb_assert ((itstate & 0x0f) != 0);
- VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+ next_pcs.push_back (MAKE_THUMB_ADDR (pc));
cond_negated = (itstate >> 4) & 1;
@@ -378,7 +380,7 @@ thumb_get_next_pcs_raw (struct arm_get_next_pcs *self)
}
while (itstate != 0 && ((itstate >> 4) & 1) == cond_negated);
- VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+ next_pcs.push_back (MAKE_THUMB_ADDR (pc));
return next_pcs;
}
@@ -393,8 +395,7 @@ thumb_get_next_pcs_raw (struct arm_get_next_pcs *self)
{
/* Advance to the next instruction. All the 32-bit
instructions share a common prefix. */
- VEC_safe_push (CORE_ADDR, next_pcs,
- MAKE_THUMB_ADDR (pc + thumb_insn_size (inst1)));
+ next_pcs.push_back (MAKE_THUMB_ADDR (pc + thumb_insn_size (inst1)));
}
return next_pcs;
@@ -628,7 +629,7 @@ thumb_get_next_pcs_raw (struct arm_get_next_pcs *self)
nextpc = pc_val + imm;
}
- VEC_safe_push (CORE_ADDR, next_pcs, nextpc);
+ next_pcs.push_back (nextpc);
return next_pcs;
}
@@ -641,7 +642,7 @@ thumb_get_next_pcs_raw (struct arm_get_next_pcs *self)
in Thumb-State, and gdbarch_addr_bits_remove () to get the plain memory
address in GDB and arm_addr_bits_remove in GDBServer. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
arm_get_next_pcs_raw (struct arm_get_next_pcs *self)
{
int byte_order = self->byte_order;
@@ -652,7 +653,7 @@ arm_get_next_pcs_raw (struct arm_get_next_pcs *self)
CORE_ADDR nextpc;
struct regcache *regcache = self->regcache;
CORE_ADDR pc = regcache_read_pc (self->regcache);
- VEC (CORE_ADDR) *next_pcs = NULL;
+ std::vector<CORE_ADDR> next_pcs;
pc_val = (unsigned long) pc;
this_instr = self->ops->read_mem_uint (pc, 4, byte_order_for_code);
@@ -709,7 +710,7 @@ arm_get_next_pcs_raw (struct arm_get_next_pcs *self)
? (pc_val + 8)
: regcache_raw_get_unsigned (regcache, rn));
- VEC_safe_push (CORE_ADDR, next_pcs, nextpc);
+ next_pcs.push_back (nextpc);
return next_pcs;
}
@@ -899,40 +900,36 @@ arm_get_next_pcs_raw (struct arm_get_next_pcs *self)
}
}
- VEC_safe_push (CORE_ADDR, next_pcs, nextpc);
+ next_pcs.push_back (nextpc);
+
return next_pcs;
}
/* See arm-get-next-pcs.h. */
-VEC (CORE_ADDR) *
+std::vector<CORE_ADDR>
arm_get_next_pcs (struct arm_get_next_pcs *self)
{
- VEC (CORE_ADDR) *next_pcs = NULL;
+ std::vector<CORE_ADDR> next_pcs;
if (self->ops->is_thumb (self))
{
next_pcs = thumb_deal_with_atomic_sequence_raw (self);
- if (next_pcs == NULL)
+ if (next_pcs.empty ())
next_pcs = thumb_get_next_pcs_raw (self);
}
else
{
next_pcs = arm_deal_with_atomic_sequence_raw (self);
- if (next_pcs == NULL)
+ if (next_pcs.empty ())
next_pcs = arm_get_next_pcs_raw (self);
}
if (self->ops->fixup != NULL)
{
- CORE_ADDR nextpc;
- int i;
-
- for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, nextpc); i++)
- {
- nextpc = self->ops->fixup (self, nextpc);
- VEC_replace (CORE_ADDR, next_pcs, i, nextpc);
- }
+ for (CORE_ADDR &pc_ref : next_pcs)
+ pc_ref = self->ops->fixup (self, pc_ref);
}
+
return next_pcs;
}
diff --git a/gdb/arch/arm-get-next-pcs.h b/gdb/arch/arm-get-next-pcs.h
index 2300ac1d7b..c6723be838 100644
--- a/gdb/arch/arm-get-next-pcs.h
+++ b/gdb/arch/arm-get-next-pcs.h
@@ -19,7 +19,8 @@
#ifndef ARM_GET_NEXT_PCS_H
#define ARM_GET_NEXT_PCS_H 1
-#include "gdb_vecs.h"
+
+#include <vector>
/* Forward declaration. */
struct arm_get_next_pcs;
@@ -61,6 +62,6 @@ void arm_get_next_pcs_ctor (struct arm_get_next_pcs *self,
struct regcache *regcache);
/* Find the next possible PCs after the current instruction executes. */
-VEC (CORE_ADDR) *arm_get_next_pcs (struct arm_get_next_pcs *self);
+std::vector<CORE_ADDR> arm_get_next_pcs (struct arm_get_next_pcs *self);
#endif /* ARM_GET_NEXT_PCS_H */
diff --git a/gdb/arm-linux-tdep.c b/gdb/arm-linux-tdep.c
index e1eab209df..094ed72757 100644
--- a/gdb/arm-linux-tdep.c
+++ b/gdb/arm-linux-tdep.c
@@ -921,22 +921,16 @@ arm_linux_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self)
/* Insert a single step breakpoint at the next executed instruction. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
arm_linux_software_single_step (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct arm_get_next_pcs next_pcs_ctx;
- CORE_ADDR pc;
- int i;
- VEC (CORE_ADDR) *next_pcs = NULL;
- struct cleanup *old_chain;
/* If the target does have hardware single step, GDB doesn't have
to bother software single step. */
if (target_can_do_single_step () == 1)
- return NULL;
-
- old_chain = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
+ return {};
arm_get_next_pcs_ctor (&next_pcs_ctx,
&arm_linux_get_next_pcs_ops,
@@ -945,15 +939,10 @@ arm_linux_software_single_step (struct regcache *regcache)
1,
regcache);
- next_pcs = arm_get_next_pcs (&next_pcs_ctx);
-
- for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
- {
- pc = gdbarch_addr_bits_remove (gdbarch, pc);
- VEC_replace (CORE_ADDR, next_pcs, i, pc);
- }
+ std::vector<CORE_ADDR> next_pcs = arm_get_next_pcs (&next_pcs_ctx);
- discard_cleanups (old_chain);
+ for (CORE_ADDR &pc_ref : next_pcs)
+ pc_ref = gdbarch_addr_bits_remove (gdbarch, pc_ref);
return next_pcs;
}
diff --git a/gdb/arm-tdep.c b/gdb/arm-tdep.c
index c8fabfb31e..24b575be17 100644
--- a/gdb/arm-tdep.c
+++ b/gdb/arm-tdep.c
@@ -6295,15 +6295,11 @@ arm_get_next_pcs_is_thumb (struct arm_get_next_pcs *self)
single-step support. We find the target of the coming instructions
and breakpoint them. */
-VEC (CORE_ADDR) *
+std::vector<CORE_ADDR>
arm_software_single_step (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct arm_get_next_pcs next_pcs_ctx;
- CORE_ADDR pc;
- int i;
- VEC (CORE_ADDR) *next_pcs = NULL;
- struct cleanup *old_chain = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
arm_get_next_pcs_ctor (&next_pcs_ctx,
&arm_get_next_pcs_ops,
@@ -6312,15 +6308,10 @@ arm_software_single_step (struct regcache *regcache)
0,
regcache);
- next_pcs = arm_get_next_pcs (&next_pcs_ctx);
-
- for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
- {
- pc = gdbarch_addr_bits_remove (gdbarch, pc);
- VEC_replace (CORE_ADDR, next_pcs, i, pc);
- }
+ std::vector<CORE_ADDR> next_pcs = arm_get_next_pcs (&next_pcs_ctx);
- discard_cleanups (old_chain);
+ for (CORE_ADDR &pc_ref : next_pcs)
+ pc_ref = gdbarch_addr_bits_remove (gdbarch, pc_ref);
return next_pcs;
}
@@ -7898,11 +7889,6 @@ arm_breakpoint_kind_from_current_state (struct gdbarch *gdbarch,
if (target_read_memory (regcache_read_pc (regcache), buf, 4) == 0)
{
struct arm_get_next_pcs next_pcs_ctx;
- CORE_ADDR pc;
- int i;
- VEC (CORE_ADDR) *next_pcs = NULL;
- struct cleanup *old_chain
- = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
arm_get_next_pcs_ctor (&next_pcs_ctx,
&arm_get_next_pcs_ops,
@@ -7911,17 +7897,15 @@ arm_breakpoint_kind_from_current_state (struct gdbarch *gdbarch,
0,
regcache);
- next_pcs = arm_get_next_pcs (&next_pcs_ctx);
+ std::vector<CORE_ADDR> next_pcs = arm_get_next_pcs (&next_pcs_ctx);
/* If MEMADDR is the next instruction of current pc, do the
software single step computation, and get the thumb mode by
the destination address. */
- for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
+ for (CORE_ADDR pc : next_pcs)
{
if (UNMAKE_THUMB_ADDR (pc) == *pcptr)
{
- do_cleanups (old_chain);
-
if (IS_THUMB_ADDR (pc))
{
*pcptr = MAKE_THUMB_ADDR (*pcptr);
@@ -7931,8 +7915,6 @@ arm_breakpoint_kind_from_current_state (struct gdbarch *gdbarch,
return ARM_BP_KIND_ARM;
}
}
-
- do_cleanups (old_chain);
}
return arm_breakpoint_kind_from_pc (gdbarch, pcptr);
diff --git a/gdb/arm-tdep.h b/gdb/arm-tdep.h
index 8125226362..132978235b 100644
--- a/gdb/arm-tdep.h
+++ b/gdb/arm-tdep.h
@@ -29,6 +29,8 @@ struct gdb_get_next_pcs;
#include "arch/arm.h"
+#include <vector>
+
/* Say how long FP registers are. Used for documentation purposes and
code readability in this header. IEEE extended doubles are 80
bits. DWORD aligned they use 96 bits. */
@@ -259,7 +261,7 @@ CORE_ADDR arm_get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self,
int arm_get_next_pcs_is_thumb (struct arm_get_next_pcs *self);
-VEC (CORE_ADDR) *arm_software_single_step (struct regcache *);
+std::vector<CORE_ADDR> arm_software_single_step (struct regcache *);
int arm_is_thumb (struct regcache *regcache);
int arm_frame_is_thumb (struct frame_info *frame);
diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c
index 4940ec271b..ba974c8cf0 100644
--- a/gdb/breakpoint.c
+++ b/gdb/breakpoint.c
@@ -15114,22 +15114,18 @@ int
insert_single_step_breakpoints (struct gdbarch *gdbarch)
{
struct regcache *regcache = get_current_regcache ();
- VEC (CORE_ADDR) * next_pcs;
+ std::vector<CORE_ADDR> next_pcs;
next_pcs = gdbarch_software_single_step (gdbarch, regcache);
- if (next_pcs != NULL)
+ if (!next_pcs.empty ())
{
- int i;
- CORE_ADDR pc;
struct frame_info *frame = get_current_frame ();
struct address_space *aspace = get_frame_address_space (frame);
- for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
+ for (CORE_ADDR pc : next_pcs)
insert_single_step_breakpoint (gdbarch, aspace, pc);
- VEC_free (CORE_ADDR, next_pcs);
-
return 1;
}
else
diff --git a/gdb/cris-tdep.c b/gdb/cris-tdep.c
index a46356ff8b..eb397725a7 100644
--- a/gdb/cris-tdep.c
+++ b/gdb/cris-tdep.c
@@ -2060,12 +2060,12 @@ find_step_target (struct regcache *regcache, inst_env_type *inst_env)
digs through the opcodes in order to find all possible targets.
Either one ordinary target or two targets for branches may be found. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
cris_software_single_step (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
inst_env_type inst_env;
- VEC (CORE_ADDR) *next_pcs = NULL;
+ std::vector<CORE_ADDR> next_pcs;
/* Analyse the present instruction environment and insert
breakpoints. */
@@ -2083,14 +2083,14 @@ cris_software_single_step (struct regcache *regcache)
CORE_ADDR next_pc
= (CORE_ADDR) inst_env.reg[gdbarch_pc_regnum (gdbarch)];
- VEC_safe_push (CORE_ADDR, next_pcs, next_pc);
+ next_pcs.push_back (next_pc);
if (inst_env.branch_found
&& (CORE_ADDR) inst_env.branch_break_address != next_pc)
{
CORE_ADDR branch_target_address
= (CORE_ADDR) inst_env.branch_break_address;
- VEC_safe_push (CORE_ADDR, next_pcs, branch_target_address);
+ next_pcs.push_back (branch_target_address);
}
}
diff --git a/gdb/gdbarch.c b/gdb/gdbarch.c
index 56643256da..f085c36deb 100644
--- a/gdb/gdbarch.c
+++ b/gdb/gdbarch.c
@@ -3223,7 +3223,7 @@ gdbarch_software_single_step_p (struct gdbarch *gdbarch)
return gdbarch->software_single_step != NULL;
}
-VEC (CORE_ADDR) *
+std::vector<CORE_ADDR>
gdbarch_software_single_step (struct gdbarch *gdbarch, struct regcache *regcache)
{
gdb_assert (gdbarch != NULL);
diff --git a/gdb/gdbarch.h b/gdb/gdbarch.h
index 7168e34b9b..2eed6b5b6d 100644
--- a/gdb/gdbarch.h
+++ b/gdb/gdbarch.h
@@ -35,6 +35,7 @@
#ifndef GDBARCH_H
#define GDBARCH_H
+#include <vector>
#include "frame.h"
#include "dis-asm.h"
@@ -700,8 +701,8 @@ extern void set_gdbarch_addr_bits_remove (struct gdbarch *gdbarch, gdbarch_addr_
extern int gdbarch_software_single_step_p (struct gdbarch *gdbarch);
-typedef VEC (CORE_ADDR) * (gdbarch_software_single_step_ftype) (struct regcache *regcache);
-extern VEC (CORE_ADDR) * gdbarch_software_single_step (struct gdbarch *gdbarch, struct regcache *regcache);
+typedef std::vector<CORE_ADDR> (gdbarch_software_single_step_ftype) (struct regcache *regcache);
+extern std::vector<CORE_ADDR> gdbarch_software_single_step (struct gdbarch *gdbarch, struct regcache *regcache);
extern void set_gdbarch_software_single_step (struct gdbarch *gdbarch, gdbarch_software_single_step_ftype *software_single_step);
/* Return non-zero if the processor is executing a delay slot and a
diff --git a/gdb/gdbarch.sh b/gdb/gdbarch.sh
index 31bee666b6..b91dc9c12e 100755
--- a/gdb/gdbarch.sh
+++ b/gdb/gdbarch.sh
@@ -640,7 +640,7 @@ m;CORE_ADDR;addr_bits_remove;CORE_ADDR addr;addr;;core_addr_identity;;0
# the condition and only put the breakpoint at the branch destination if
# the condition is true, so that we ensure forward progress when stepping
# past a conditional branch to self.
-F;VEC (CORE_ADDR) *;software_single_step;struct regcache *regcache;regcache
+F;std::vector<CORE_ADDR>;software_single_step;struct regcache *regcache;regcache
# Return non-zero if the processor is executing a delay slot and a
# further single-step is needed before the instruction finishes.
@@ -1268,6 +1268,7 @@ cat <<EOF
#ifndef GDBARCH_H
#define GDBARCH_H
+#include <vector>
#include "frame.h"
#include "dis-asm.h"
diff --git a/gdb/gdbserver/linux-arm-low.c b/gdb/gdbserver/linux-arm-low.c
index fc2b34870a..5a3f465dee 100644
--- a/gdb/gdbserver/linux-arm-low.c
+++ b/gdb/gdbserver/linux-arm-low.c
@@ -925,11 +925,10 @@ arm_arch_setup (void)
/* Fetch the next possible PCs after the current instruction executes. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
arm_gdbserver_get_next_pcs (struct regcache *regcache)
{
struct arm_get_next_pcs next_pcs_ctx;
- VEC (CORE_ADDR) *next_pcs = NULL;
arm_get_next_pcs_ctor (&next_pcs_ctx,
&get_next_pcs_ops,
@@ -939,9 +938,7 @@ arm_gdbserver_get_next_pcs (struct regcache *regcache)
1,
regcache);
- next_pcs = arm_get_next_pcs (&next_pcs_ctx);
-
- return next_pcs;
+ return arm_get_next_pcs (&next_pcs_ctx);
}
/* Support for hardware single step. */
diff --git a/gdb/gdbserver/linux-low.c b/gdb/gdbserver/linux-low.c
index e27cbf825a..ea3c81b847 100644
--- a/gdb/gdbserver/linux-low.c
+++ b/gdb/gdbserver/linux-low.c
@@ -4317,19 +4317,14 @@ enqueue_pending_signal (struct lwp_info *lwp, int signal, siginfo_t *info)
static void
install_software_single_step_breakpoints (struct lwp_info *lwp)
{
- int i;
- CORE_ADDR pc;
struct thread_info *thread = get_lwp_thread (lwp);
struct regcache *regcache = get_thread_regcache (thread, 1);
- VEC (CORE_ADDR) *next_pcs = NULL;
struct cleanup *old_chain = make_cleanup_restore_current_thread ();
- make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
-
current_thread = thread;
- next_pcs = (*the_low_target.get_next_pcs) (regcache);
+ std::vector<CORE_ADDR> next_pcs = the_low_target.get_next_pcs (regcache);
- for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); ++i)
+ for (CORE_ADDR pc : next_pcs)
set_single_step_breakpoint (pc, current_ptid);
do_cleanups (old_chain);
diff --git a/gdb/gdbserver/linux-low.h b/gdb/gdbserver/linux-low.h
index 7dcbfcfca4..6328da03ed 100644
--- a/gdb/gdbserver/linux-low.h
+++ b/gdb/gdbserver/linux-low.h
@@ -154,7 +154,7 @@ struct linux_target_ops
const gdb_byte *(*sw_breakpoint_from_kind) (int kind, int *size);
/* Find the next possible PCs after the current instruction executes. */
- VEC (CORE_ADDR) *(*get_next_pcs) (struct regcache *regcache);
+ std::vector<CORE_ADDR> (*get_next_pcs) (struct regcache *regcache);
int decr_pc_after_break;
int (*breakpoint_at) (CORE_ADDR pc);
diff --git a/gdb/mips-tdep.c b/gdb/mips-tdep.c
index 45d1d731b0..d38cc225dd 100644
--- a/gdb/mips-tdep.c
+++ b/gdb/mips-tdep.c
@@ -3879,7 +3879,7 @@ mips_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR addr)
#define SC_OPCODE 0x38
#define SCD_OPCODE 0x3c
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
mips_deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
{
CORE_ADDR breaks[2] = {-1, -1};
@@ -3890,12 +3890,11 @@ mips_deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
int index;
int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
const int atomic_sequence_length = 16; /* Instruction sequence length. */
- VEC (CORE_ADDR) *next_pcs = NULL;
insn = mips_fetch_instruction (gdbarch, ISA_MIPS, loc, NULL);
/* Assume all atomic sequences start with a ll/lld instruction. */
if (itype_op (insn) != LL_OPCODE && itype_op (insn) != LLD_OPCODE)
- return NULL;
+ return {};
/* Assume that no atomic sequence is longer than "atomic_sequence_length"
instructions. */
@@ -3912,7 +3911,7 @@ mips_deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
{
case 0: /* SPECIAL */
if (rtype_funct (insn) >> 1 == 4) /* JR, JALR */
- return 0; /* fallback to the standard single-step code. */
+ return {}; /* fallback to the standard single-step code. */
break;
case 1: /* REGIMM */
is_branch = ((itype_rt (insn) & 0xc) == 0 /* B{LT,GE}Z* */
@@ -3921,7 +3920,7 @@ mips_deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
break;
case 2: /* J */
case 3: /* JAL */
- return 0; /* fallback to the standard single-step code. */
+ return {}; /* fallback to the standard single-step code. */
case 4: /* BEQ */
case 5: /* BNE */
case 6: /* BLEZ */
@@ -3947,8 +3946,8 @@ mips_deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
{
branch_bp = loc + mips32_relative_offset (insn) + 4;
if (last_breakpoint >= 1)
- return 0; /* More than one branch found, fallback to the
- standard single-step code. */
+ return {}; /* More than one branch found, fallback to the
+ standard single-step code. */
breaks[1] = branch_bp;
last_breakpoint++;
}
@@ -3959,7 +3958,7 @@ mips_deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
/* Assume that the atomic sequence ends with a sc/scd instruction. */
if (itype_op (insn) != SC_OPCODE && itype_op (insn) != SCD_OPCODE)
- return NULL;
+ return {};
loc += MIPS_INSN32_SIZE;
@@ -3971,14 +3970,16 @@ mips_deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
if (last_breakpoint && pc <= breaks[1] && breaks[1] <= breaks[0])
last_breakpoint = 0;
+ std::vector<CORE_ADDR> next_pcs;
+
/* Effectively inserts the breakpoints. */
for (index = 0; index <= last_breakpoint; index++)
- VEC_safe_push (CORE_ADDR, next_pcs, breaks[index]);
+ next_pcs.push_back (breaks[index]);
return next_pcs;
}
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
micromips_deal_with_atomic_sequence (struct gdbarch *gdbarch,
CORE_ADDR pc)
{
@@ -3992,17 +3993,16 @@ micromips_deal_with_atomic_sequence (struct gdbarch *gdbarch,
ULONGEST insn;
int insn_count;
int index;
- VEC (CORE_ADDR) *next_pcs = NULL;
/* Assume all atomic sequences start with a ll/lld instruction. */
insn = mips_fetch_instruction (gdbarch, ISA_MICROMIPS, loc, NULL);
if (micromips_op (insn) != 0x18) /* POOL32C: bits 011000 */
- return NULL;
+ return {};
loc += MIPS_INSN16_SIZE;
insn <<= 16;
insn |= mips_fetch_instruction (gdbarch, ISA_MICROMIPS, loc, NULL);
if ((b12s4_op (insn) & 0xb) != 0x3) /* LL, LLD: bits 011000 0x11 */
- return NULL;
+ return {};
loc += MIPS_INSN16_SIZE;
/* Assume all atomic sequences end with an sc/scd instruction. Assume
@@ -4072,7 +4072,7 @@ micromips_deal_with_atomic_sequence (struct gdbarch *gdbarch,
case 0x35: /* J: bits 110101 */
case 0x3d: /* JAL: bits 111101 */
case 0x3c: /* JALX: bits 111100 */
- return 0; /* Fall back to the standard single-step code. */
+ return {}; /* Fall back to the standard single-step code. */
case 0x18: /* POOL32C: bits 011000 */
if ((b12s4_op (insn) & 0xb) == 0xb)
@@ -4099,24 +4099,24 @@ micromips_deal_with_atomic_sequence (struct gdbarch *gdbarch,
&& b5s5_op (insn) != 0x18)
/* JRADDIUSP: bits 010001 11000 */
break;
- return NULL; /* Fall back to the standard single-step code. */
+ return {}; /* Fall back to the standard single-step code. */
case 0x33: /* B16: bits 110011 */
- return NULL; /* Fall back to the standard single-step code. */
+ return {}; /* Fall back to the standard single-step code. */
}
break;
}
if (is_branch)
{
if (last_breakpoint >= 1)
- return NULL; /* More than one branch found, fallback to the
- standard single-step code. */
+ return {}; /* More than one branch found, fallback to the
+ standard single-step code. */
breaks[1] = branch_bp;
last_breakpoint++;
}
}
if (!sc_found)
- return NULL;
+ return {};
/* Insert a breakpoint right after the end of the atomic sequence. */
breaks[0] = loc;
@@ -4126,14 +4126,16 @@ micromips_deal_with_atomic_sequence (struct gdbarch *gdbarch,
if (last_breakpoint && pc <= breaks[1] && breaks[1] <= breaks[0])
last_breakpoint = 0;
+ std::vector<CORE_ADDR> next_pcs;
+
/* Effectively inserts the breakpoints. */
for (index = 0; index <= last_breakpoint; index++)
- VEC_safe_push (CORE_ADDR, next_pcs, breaks[index]);
+ next_pcs.push_back (breaks[index]);
return next_pcs;
}
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
{
if (mips_pc_is_mips (pc))
@@ -4141,7 +4143,7 @@ deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
else if (mips_pc_is_micromips (gdbarch, pc))
return micromips_deal_with_atomic_sequence (gdbarch, pc);
else
- return NULL;
+ return {};
}
/* mips_software_single_step() is called just before we want to resume
@@ -4149,22 +4151,21 @@ deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
or kernel single-step support (MIPS on GNU/Linux for example). We find
the target of the coming instruction and breakpoint it. */
-VEC (CORE_ADDR) *
+std::vector<CORE_ADDR>
mips_software_single_step (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
CORE_ADDR pc, next_pc;
- VEC (CORE_ADDR) *next_pcs;
pc = regcache_read_pc (regcache);
- next_pcs = deal_with_atomic_sequence (gdbarch, pc);
- if (next_pcs != NULL)
+ std::vector<CORE_ADDR> next_pcs = deal_with_atomic_sequence (gdbarch, pc);
+
+ if (!next_pcs.empty ())
return next_pcs;
next_pc = mips_next_pc (regcache, pc);
- VEC_safe_push (CORE_ADDR, next_pcs, next_pc);
- return next_pcs;
+ return {next_pc};
}
/* Test whether the PC points to the return instruction at the
diff --git a/gdb/mips-tdep.h b/gdb/mips-tdep.h
index ce168cc49c..541a275f30 100644
--- a/gdb/mips-tdep.h
+++ b/gdb/mips-tdep.h
@@ -154,7 +154,8 @@ enum
};
/* Single step based on where the current instruction will take us. */
-extern VEC (CORE_ADDR) *mips_software_single_step (struct regcache *regcache);
+extern std::vector<CORE_ADDR> mips_software_single_step
+ (struct regcache *regcache);
/* Strip the ISA (compression) bit off from ADDR. */
extern CORE_ADDR mips_unmake_compact_addr (CORE_ADDR addr);
diff --git a/gdb/moxie-tdep.c b/gdb/moxie-tdep.c
index dd7a6f4bfb..2972d5248e 100644
--- a/gdb/moxie-tdep.c
+++ b/gdb/moxie-tdep.c
@@ -299,7 +299,7 @@ moxie_process_readu (CORE_ADDR addr, gdb_byte *buf,
/* Insert a single step breakpoint. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
moxie_software_single_step (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
@@ -309,7 +309,7 @@ moxie_software_single_step (struct regcache *regcache)
uint32_t tmpu32;
ULONGEST fp;
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- VEC (CORE_ADDR) *next_pcs = NULL;
+ std::vector<CORE_ADDR> next_pcs;
addr = regcache_read_pc (regcache);
@@ -337,9 +337,8 @@ moxie_software_single_step (struct regcache *regcache)
case 0x09: /* bleu */
/* Insert breaks on both branches, because we can't currently tell
which way things will go. */
- VEC_safe_push (CORE_ADDR, next_pcs, addr + 2);
- VEC_safe_push (CORE_ADDR, next_pcs,
- addr + 2 + INST2OFFSET(inst));
+ next_pcs.push_back (addr + 2);
+ next_pcs.push_back (addr + 2 + INST2OFFSET(inst));
break;
default:
{
@@ -351,7 +350,7 @@ moxie_software_single_step (struct regcache *regcache)
else
{
/* This is a Form 2 instruction. They are all 16 bits. */
- VEC_safe_push (CORE_ADDR, next_pcs, addr + 2);
+ next_pcs.push_back (addr + 2);
}
}
else
@@ -398,7 +397,7 @@ moxie_software_single_step (struct regcache *regcache)
case 0x32: /* udiv.l */
case 0x33: /* mod.l */
case 0x34: /* umod.l */
- VEC_safe_push (CORE_ADDR, next_pcs, addr + 2);
+ next_pcs.push_back (addr + 2);
break;
/* 32-bit instructions. */
@@ -408,7 +407,7 @@ moxie_software_single_step (struct regcache *regcache)
case 0x37: /* sto.b */
case 0x38: /* ldo.s */
case 0x39: /* sto.s */
- VEC_safe_push (CORE_ADDR, next_pcs, addr + 4);
+ next_pcs.push_back (addr + 4);
break;
/* 48-bit instructions. */
@@ -421,27 +420,26 @@ moxie_software_single_step (struct regcache *regcache)
case 0x20: /* ldi.s (immediate) */
case 0x22: /* lda.s */
case 0x24: /* sta.s */
- VEC_safe_push (CORE_ADDR, next_pcs, addr + 6);
+ next_pcs.push_back (addr + 6);
break;
/* Control flow instructions. */
case 0x03: /* jsra */
case 0x1a: /* jmpa */
- VEC_safe_push (CORE_ADDR, next_pcs,
- moxie_process_readu (addr + 2, buf, 4, byte_order));
+ next_pcs.push_back (moxie_process_readu (addr + 2, buf, 4,
+ byte_order));
break;
case 0x04: /* ret */
regcache_cooked_read_unsigned (regcache, MOXIE_FP_REGNUM, &fp);
- VEC_safe_push (CORE_ADDR, next_pcs,
- moxie_process_readu (fp + 4, buf, 4, byte_order));
+ next_pcs.push_back (moxie_process_readu (fp + 4, buf, 4, byte_order));
break;
case 0x19: /* jsr */
case 0x25: /* jmp */
regcache_raw_read (regcache,
(inst >> 4) & 0xf, (gdb_byte *) & tmpu32);
- VEC_safe_push (CORE_ADDR, next_pcs, tmpu32);
+ next_pcs.push_back (tmpu32);
break;
case 0x30: /* swi */
diff --git a/gdb/nios2-tdep.c b/gdb/nios2-tdep.c
index 3d39451804..c214078921 100644
--- a/gdb/nios2-tdep.c
+++ b/gdb/nios2-tdep.c
@@ -2219,16 +2219,13 @@ nios2_get_next_pc (struct regcache *regcache, CORE_ADDR pc)
/* Implement the software_single_step gdbarch method. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
nios2_software_single_step (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
CORE_ADDR next_pc = nios2_get_next_pc (regcache, regcache_read_pc (regcache));
- VEC (CORE_ADDR) *next_pcs = NULL;
- VEC_safe_push (CORE_ADDR, next_pcs, next_pc);
-
- return next_pcs;
+ return {next_pc};
}
/* Implement the get_longjump_target gdbarch method. */
diff --git a/gdb/ppc-tdep.h b/gdb/ppc-tdep.h
index 875ad93b18..8d15ace214 100644
--- a/gdb/ppc-tdep.h
+++ b/gdb/ppc-tdep.h
@@ -76,7 +76,8 @@ int ppc_altivec_support_p (struct gdbarch *gdbarch);
/* Return non-zero if the architecture described by GDBARCH has
VSX registers (vsr0 --- vsr63). */
int vsx_support_p (struct gdbarch *gdbarch);
-VEC (CORE_ADDR) *ppc_deal_with_atomic_sequence (struct regcache *regcache);
+std::vector<CORE_ADDR> ppc_deal_with_atomic_sequence
+ (struct regcache *regcache);
/* Register set description. */
diff --git a/gdb/rs6000-aix-tdep.c b/gdb/rs6000-aix-tdep.c
index a14e93c66a..7d817bee1d 100644
--- a/gdb/rs6000-aix-tdep.c
+++ b/gdb/rs6000-aix-tdep.c
@@ -673,7 +673,7 @@ branch_dest (struct regcache *regcache, int opcode, int instr,
/* AIX does not support PT_STEP. Simulate it. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
rs6000_software_single_step (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
@@ -682,14 +682,13 @@ rs6000_software_single_step (struct regcache *regcache)
CORE_ADDR loc;
CORE_ADDR breaks[2];
int opcode;
- VEC (CORE_ADDR) *next_pcs;
loc = regcache_read_pc (regcache);
insn = read_memory_integer (loc, 4, byte_order);
- next_pcs = ppc_deal_with_atomic_sequence (regcache);
- if (next_pcs != NULL)
+ std::vector<CORE_ADDR> next_pcs = ppc_deal_with_atomic_sequence (regcache);
+ if (!next_pcs.empty ())
return next_pcs;
breaks[0] = loc + PPC_INSN_SIZE;
@@ -705,7 +704,8 @@ rs6000_software_single_step (struct regcache *regcache)
/* ignore invalid breakpoint. */
if (breaks[ii] == -1)
continue;
- VEC_safe_push (CORE_ADDR, next_pcs, breaks[ii]);
+
+ next_pcs.push_back (breaks[ii]);
}
errno = 0; /* FIXME, don't ignore errors! */
diff --git a/gdb/rs6000-tdep.c b/gdb/rs6000-tdep.c
index eb784c562f..4072464558 100644
--- a/gdb/rs6000-tdep.c
+++ b/gdb/rs6000-tdep.c
@@ -1165,7 +1165,7 @@ ppc_displaced_step_hw_singlestep (struct gdbarch *gdbarch,
Load And Reserve instruction and ending with a Store Conditional
instruction. If such a sequence is found, attempt to step through it.
A breakpoint is placed at the end of the sequence. */
-VEC (CORE_ADDR) *
+std::vector<CORE_ADDR>
ppc_deal_with_atomic_sequence (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
@@ -1180,11 +1180,10 @@ ppc_deal_with_atomic_sequence (struct regcache *regcache)
int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
const int atomic_sequence_length = 16; /* Instruction sequence length. */
int bc_insn_count = 0; /* Conditional branch instruction count. */
- VEC (CORE_ADDR) *next_pcs = NULL;
/* Assume all atomic sequences start with a Load And Reserve instruction. */
if (!IS_LOAD_AND_RESERVE_INSN (insn))
- return NULL;
+ return {};
/* Assume that no atomic sequence is longer than "atomic_sequence_length"
instructions. */
@@ -1202,8 +1201,8 @@ ppc_deal_with_atomic_sequence (struct regcache *regcache)
int absolute = insn & 2;
if (bc_insn_count >= 1)
- return 0; /* More than one conditional branch found, fallback
- to the standard single-step code. */
+ return {}; /* More than one conditional branch found, fallback
+ to the standard single-step code. */
if (absolute)
breaks[1] = immediate;
@@ -1221,7 +1220,7 @@ ppc_deal_with_atomic_sequence (struct regcache *regcache)
/* Assume that the atomic sequence ends with a Store Conditional
instruction. */
if (!IS_STORE_CONDITIONAL_INSN (insn))
- return NULL;
+ return {};
closing_insn = loc;
loc += PPC_INSN_SIZE;
@@ -1237,8 +1236,10 @@ ppc_deal_with_atomic_sequence (struct regcache *regcache)
|| (breaks[1] >= pc && breaks[1] <= closing_insn)))
last_breakpoint = 0;
+ std::vector<CORE_ADDR> next_pcs;
+
for (index = 0; index <= last_breakpoint; index++)
- VEC_safe_push (CORE_ADDR, next_pcs, breaks[index]);
+ next_pcs.push_back (breaks[index]);
return next_pcs;
}
diff --git a/gdb/s390-linux-tdep.c b/gdb/s390-linux-tdep.c
index 55129d81f4..8139d817d9 100644
--- a/gdb/s390-linux-tdep.c
+++ b/gdb/s390-linux-tdep.c
@@ -725,7 +725,7 @@ s390_is_partial_instruction (struct gdbarch *gdbarch, CORE_ADDR loc, int *len)
process about 4kiB of it each time, leading to O(n**2) memory and time
complexity. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
s390_software_single_step (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
@@ -733,33 +733,30 @@ s390_software_single_step (struct regcache *regcache)
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
int len;
uint16_t insn;
- VEC (CORE_ADDR) *next_pcs = NULL;
/* Special handling only if recording. */
if (!record_full_is_used ())
- return NULL;
+ return {};
/* First, match a partial instruction. */
if (!s390_is_partial_instruction (gdbarch, loc, &len))
- return NULL;
+ return {};
loc += len;
/* Second, look for a branch back to it. */
insn = read_memory_integer (loc, 2, byte_order);
if (insn != 0xa714) /* BRC with mask 1 */
- return NULL;
+ return {};
insn = read_memory_integer (loc + 2, 2, byte_order);
if (insn != (uint16_t) -(len / 2))
- return NULL;
+ return {};
loc += 4;
/* Found it, step past the whole thing. */
- VEC_safe_push (CORE_ADDR, next_pcs, loc);
-
- return next_pcs;
+ return {loc};
}
static int
diff --git a/gdb/sparc-tdep.c b/gdb/sparc-tdep.c
index 078907a5d4..14d9fc97bc 100644
--- a/gdb/sparc-tdep.c
+++ b/gdb/sparc-tdep.c
@@ -1643,7 +1643,7 @@ sparc_step_trap (struct frame_info *frame, unsigned long insn)
return 0;
}
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
sparc_software_single_step (struct regcache *regcache)
{
struct gdbarch *arch = get_regcache_arch (regcache);
@@ -1651,7 +1651,7 @@ sparc_software_single_step (struct regcache *regcache)
CORE_ADDR npc, nnpc;
CORE_ADDR pc, orig_npc;
- VEC (CORE_ADDR) *next_pcs = NULL;
+ std::vector<CORE_ADDR> next_pcs;
pc = regcache_raw_get_unsigned (regcache, tdep->pc_regnum);
orig_npc = npc = regcache_raw_get_unsigned (regcache, tdep->npc_regnum);
@@ -1659,10 +1659,10 @@ sparc_software_single_step (struct regcache *regcache)
/* Analyze the instruction at PC. */
nnpc = sparc_analyze_control_transfer (regcache, pc, &npc);
if (npc != 0)
- VEC_safe_push (CORE_ADDR, next_pcs, npc);
+ next_pcs.push_back (npc);
if (nnpc != 0)
- VEC_safe_push (CORE_ADDR, next_pcs, nnpc);
+ next_pcs.push_back (nnpc);
/* Assert that we have set at least one breakpoint, and that
they're not set at the same spot - unless we're going
diff --git a/gdb/spu-tdep.c b/gdb/spu-tdep.c
index 91b1a0e4d6..08ab19418f 100644
--- a/gdb/spu-tdep.c
+++ b/gdb/spu-tdep.c
@@ -1612,7 +1612,7 @@ spu_memory_remove_breakpoint (struct gdbarch *gdbarch,
/* Software single-stepping support. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
spu_software_single_step (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
@@ -1622,7 +1622,7 @@ spu_software_single_step (struct regcache *regcache)
int offset, reg;
gdb_byte buf[4];
ULONGEST lslr;
- VEC (CORE_ADDR) *next_pcs = NULL;
+ std::vector<CORE_ADDR> next_pcs;
pc = regcache_read_pc (regcache);
@@ -1645,7 +1645,7 @@ spu_software_single_step (struct regcache *regcache)
else
next_pc = (SPUADDR_ADDR (pc) + 4) & lslr;
- VEC_safe_push (CORE_ADDR, next_pcs, SPUADDR (SPUADDR_SPU (pc), next_pc));
+ next_pcs.push_back (SPUADDR (SPUADDR_SPU (pc), next_pc));
if (is_branch (insn, &offset, ®))
{
@@ -1658,8 +1658,7 @@ spu_software_single_step (struct regcache *regcache)
target = target & lslr;
if (target != next_pc)
- VEC_safe_push (CORE_ADDR, next_pcs, SPUADDR (SPUADDR_SPU (pc),
- target));
+ next_pcs.push_back (SPUADDR (SPUADDR_SPU (pc), target));
}
return next_pcs;
diff --git a/gdb/tic6x-tdep.c b/gdb/tic6x-tdep.c
index 23b7b280f6..012b749389 100644
--- a/gdb/tic6x-tdep.c
+++ b/gdb/tic6x-tdep.c
@@ -699,15 +699,12 @@ tic6x_get_next_pc (struct regcache *regcache, CORE_ADDR pc)
/* This is the implementation of gdbarch method software_single_step. */
-static VEC (CORE_ADDR) *
+static std::vector<CORE_ADDR>
tic6x_software_single_step (struct regcache *regcache)
{
CORE_ADDR next_pc = tic6x_get_next_pc (regcache, regcache_read_pc (regcache));
- VEC (CORE_ADDR) *next_pcs = NULL;
- VEC_safe_push (CORE_ADDR, next_pcs, next_pc);
-
- return next_pcs;
+ return {next_pc};
}
/* This is the implementation of gdbarch method frame_align. */
--
2.12.2