[PATCH] Remove d10v from testsuite

[Yao Qi <qiyaoltc at gmail dot com>]

This patch removes the leftover of the d10v stuff in the testsuite
directory. The d10v port was removed in GDB 6.7, but I happen to see
that there are still some leftovers about d10v in testsuite.

gdb/testsuite:

2015-11-09  Yao Qi  <yao.qi@linaro.org>

	* gdb.base/call-sc.exp (test_scalar_returns): Remove the
	comments about d10v.
	(test_scalar_returns): Likewise.
	* gdb.base/d10v.ld: Remove.
	* gdb.base/overlays.exp: Remove the target triplet checking for
	d10v-*-*.
	* gdb.base/structs.exp (test_struct_returns): Remove the
	comments about d10v.
	(test_struct_calls): Likewise.
---
 gdb/testsuite/gdb.base/call-sc.exp  |   7 +-
 gdb/testsuite/gdb.base/d10v.ld      | 193 ------------------------------------
 gdb/testsuite/gdb.base/overlays.exp |   4 +-
 gdb/testsuite/gdb.base/structs.exp  |   9 +-
 4 files changed, 3 insertions(+), 210 deletions(-)
 delete mode 100644 gdb/testsuite/gdb.base/d10v.ld

diff --git a/gdb/testsuite/gdb.base/call-sc.exp b/gdb/testsuite/gdb.base/call-sc.exp
index cb78f15..fe5396b 100644
--- a/gdb/testsuite/gdb.base/call-sc.exp
+++ b/gdb/testsuite/gdb.base/call-sc.exp
@@ -386,9 +386,6 @@ proc test_scalar_returns { } {
 
 # NetBSD/PPC returns "unnatural" (3, 5, 6, 7) sized scalars in memory.
 
-# d10v is weird. 5/6 byte scalars go in memory.  2 or more char
-# scalars go in memory.  Everything else is in a register!
-
 # Test every single char struct from 1..17 in size.  This is what the
 # original "scalars" test was doing.
 
@@ -409,9 +406,7 @@ test_scalar_returns
 
 # The approx size of each structure it is computed assumed that tc=1,
 # ts=2, ti=4, tl=4, tll=8, tf=4, td=8, tld=16, and that all fields are
-# naturally aligned.  Padding being added where needed.  Note that
-# these numbers are just approx, the d10v has ti=2, a 64-bit has has
-# tl=8.
+# naturally aligned.  Padding being added where needed.
 
 # Approx size: 2, 4, ...
 start_scalars_test ts
diff --git a/gdb/testsuite/gdb.base/d10v.ld b/gdb/testsuite/gdb.base/d10v.ld
deleted file mode 100644
index 41f085b..0000000
--- a/gdb/testsuite/gdb.base/d10v.ld
+++ /dev/null
@@ -1,193 +0,0 @@
-OUTPUT_FORMAT("elf32-d10v", "elf32-d10v",
-	      "elf32-d10v")
-OUTPUT_ARCH(d10v)
-ENTRY(_start)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-
-MEMORY
-{
-  UNIFIED : org = 0,         len = 0x1000000
-  INSN    : org = 0x1014000, len = 0x40000
-  DATA    : org = 0x2000004, len = 0x7FFC
-  STACK   : org = 0x200BFFE, len = 4
-}
-
-SECTIONS
-{
-  /* Overlay sections: */
-  .ovly0  0x1001000 : AT (0x8000) { foo.o(.text)  }
-  .ovly1  0x1001000 : AT (0x9000) { bar.o(.text)  }
-  .ovly2  0x1002000 : AT (0xa000) { baz.o(.text)  }
-  .ovly3  0x1002000 : AT (0xb000) { grbx.o(.text) }
-  .data00 0x2001000 : AT (0xc000) { foo.o(.data)  }
-  .data01 0x2001000 : AT (0xd000) { bar.o(.data)  }
-  .data02 0x2002000 : AT (0xe000) { baz.o(.data)  }
-  .data03 0x2002000 : AT (0xf000) { grbx.o(.data) }
-
-  .text :
-  {
-    KEEP (*(.init))
-    KEEP (*(.init.*))
-    KEEP (*(.fini))
-    KEEP (*(.fini.*))
-    *(.text)
-    *(.text.*)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    *(.gnu.linkonce.t*)
-    _etext = .;
-    PROVIDE (etext = .);
-  } >INSN =0
-  .rodata    : {
-    *(.rodata) 
-    *(.gnu.linkonce.r*)
-    *(.rodata.*) 
-  } >DATA
-  .rodata1   : { 
-    *(.rodata1)
-    *(.rodata1.*)
-  } >DATA
-
-  .data    :
-  {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d*)
-    _ovly_table = .; 
-	LONG(ABSOLUTE(ADDR(.ovly0)));
-	LONG(SIZEOF(.ovly0));
-	LONG(LOADADDR(.ovly0));
-	LONG(0);
-	LONG(ABSOLUTE(ADDR(.ovly1)));
-	LONG(SIZEOF(.ovly1));
-	LONG(LOADADDR(.ovly1));
-	LONG(0);
-	LONG(ABSOLUTE(ADDR(.ovly2)));
-	LONG(SIZEOF(.ovly2));
-	LONG(LOADADDR(.ovly2));
-	LONG(0);
-	LONG(ABSOLUTE(ADDR(.ovly3)));
-	LONG(SIZEOF(.ovly3));
-	LONG(LOADADDR(.ovly3));
-	LONG(0);
-	LONG(ABSOLUTE(ADDR(.data00)));
-	LONG(SIZEOF(.data00));
-	LONG(LOADADDR(.data00));
-	LONG(0);
-	LONG(ABSOLUTE(ADDR(.data01)));
-	LONG(SIZEOF(.data01));
-	LONG(LOADADDR(.data01));
-	LONG(0);
-	LONG(ABSOLUTE(ADDR(.data02)));
-	LONG(SIZEOF(.data02));
-	LONG(LOADADDR(.data02));
-	LONG(0);
-	LONG(ABSOLUTE(ADDR(.data03)));
-	LONG(SIZEOF(.data03));
-	LONG(LOADADDR(.data03));
-	LONG(0);
-    _novlys = .;
-	LONG((_novlys - _ovly_table) / 16);
-    CONSTRUCTORS
-  } >DATA
-  .data1   : {
-    *(.data1)
-    *(.data1.*)
-  } >DATA
-  .ctors         :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  } >DATA
-  .dtors         :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  } >DATA
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata     : {
-    *(.sdata)
-    *(.sdata.*)
-  } >DATA
-  _edata  =  .;
-  PROVIDE (edata = .);
-  __bss_start = .;
-  .sbss      : { *(.sbss) *(.scommon) } >DATA
-  .bss       :
-  {
-   *(.dynbss)
-   *(.dynbss.*)
-   *(.bss)
-   *(.bss.*)
-   *(COMMON)
-  } >DATA
-
-  _end = . ;
-  PROVIDE (end = .);
-
-  .stack : { _stack = .; *(.stack) } >STACK
-
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-
-  .comment 0 : { *(.comment) }
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/gdb/testsuite/gdb.base/overlays.exp b/gdb/testsuite/gdb.base/overlays.exp
index e623eab..6bee674 100644
--- a/gdb/testsuite/gdb.base/overlays.exp
+++ b/gdb/testsuite/gdb.base/overlays.exp
@@ -22,9 +22,7 @@
 
 set data_overlays 1
 
-if [istarget "d10v-*-*"] then {
-    set linker_script "${srcdir}/${subdir}/d10v.ld"
-} elseif [istarget "m32r-*-*"] then {
+if [istarget "m32r-*-*"] then {
     set linker_script "${srcdir}/${subdir}/m32r.ld"
 } elseif [istarget "spu-*-*"] then {
     set linker_script "${srcdir}/${subdir}/spu.ld"
diff --git a/gdb/testsuite/gdb.base/structs.exp b/gdb/testsuite/gdb.base/structs.exp
index 7507455..ff524fe 100644
--- a/gdb/testsuite/gdb.base/structs.exp
+++ b/gdb/testsuite/gdb.base/structs.exp
@@ -485,9 +485,6 @@ proc test_struct_returns { n } {
 
 # NetBSD/PPC returns "unnatural" (3, 5, 6, 7) sized structs in memory.
 
-# d10v is weird. 5/6 byte structs go in memory.  2 or more char
-# structs go in memory.  Everything else is in a register!
-
 # Test every single char struct from 1..17 in size.  This is what the
 # original "structs" test was doing.
 
@@ -512,9 +509,7 @@ for {set i 1} {$i <= 8} {incr i} {
 
 # The approx size of each structure it is computed assumed that tc=1,
 # ts=2, ti=4, tl=4, tll=8, tf=4, td=8, tld=16, and that all fields are
-# naturally aligned.  Padding being added where needed.  Note that
-# these numbers are just approx, the d10v has ti=2, a 64-bit has has
-# tl=8.
+# naturally aligned.  Padding being added where needed.
 
 # Approx size: 2, 4, ...
 start_structs_test { ts }
@@ -662,13 +657,11 @@ test_struct_calls 2
 # Some float combinations
 
 # Approx size: 8+4=12, 16, ...
-# d10v: 4+4=8, 12, ...
 start_structs_test { td tf }
 test_struct_calls 2
 test_struct_returns 2
 
 # Approx size: (4+4)+8=16, 32, ...
-# d10v: 4+4=8, 12, ...
 start_structs_test { tf td }
 test_struct_calls 2
 test_struct_returns 2
-- 
1.9.1